fifine SC3 Audio Mixer
GUIDELINE FOR USE
PCIMAC setup
- Connect your desktop/laptop with the SC3 Audio Mixer via USB cable.
- Computer Setting: Select “Microphone (fifine SC3)” as input device and select ” Speaker (fifine SC3)” as output device.
- Plug a compatible 3.5mm headset into the Headset Port of SC3 Audio Mixer.
WHAT’S IN THE BOX
- 1X Gaming Audio Mixer
- 1X USB Cable
- 1X 3.5mm to 3.5mm Audio Cable
- 1X User’s Manual
SPECIFICATION
Microphone Input
- Frequency Response: 25Hz-20 KHz
- Microphone Interface: XLR or 1/4″ Mic
- S/N Ratio: 75dB
- THD+N:
Auxiliary Input or Optical Input
- Frequency Response: 20Hz-20KHz
- S/N Ratio: 90dB
- THD+N:
Headphones Output
- Frequency Response: 20Hz-20 KHz
- Headphones Interface: 3.5mm
- S/N Ratio: 93 dB
- THD+N:
- Power: 38mW@32Ω
OTG
- Data Transmission: USB 2.0 or above
- Sampling Rate: 44.1-48KHz
- Bit Depths: 16-bit/24-bit
IMPORTANT NOTICE
- PC Setting: “Speaker Properties” -“Level”-Make sure to turn on the “speaker icon” under “Microphone” before monitoring the mixer’s input channel.
- Select “fine SC3” as the default input device on the system level to save extra settings for different software.
- Confirm if your XLR condenser mic requires 48V phantom power before turning it on.
- If the Headset interface and the combo input interface are connected at the same time, the mixer will give priority to the Headset recording.
- The electric tone and voice change function cannot be used at the same time.
- Please come to our website for more technical support.
INTERFACE AND FUNCTION KEYS INSTRUCTION
Back Panel
- USB-C Port
- Line Out Port
- Headphone Output Interface
- Line In Port
- Headset(lnput & Output) Interface
- Dynamic/Condenser Switch
- XLR&6.35mm Combo Input Interface
Front Panel - 48V Phantom Power-Short press to turn on or off 48V Phantom Power.
- Electric Button-Switch electric tone, and there are 12 kinds of tones.
(Only available for microphone recording.) - Customized Button-Used to customize sound effects recording and playback.
- RGB Button-Long press and hold to turn on/off, and short press to switch.
- Voice Change-Long press and hold to turn on/off, and short press to change voice mode.
- Microphone Mute-Short press to mute or unmute the MICROPHONE channel.
- Line In Mute-Short press to mute or unmute the channel LINE.
- Mic Monitor-Short press to turn on/off the microphone real-time monitoring.
- Line Out Mute- Short press to mute or unmute the LINE OUT channel.
- Mic Channel Volume Slide Fader-Increase or decrease MIC volume.
- Line In Channel Volume Slider-Increase or decrease LINE IN channel volume.
- Headphone Channel Volume Slide Fader-Increase or decrease HEADPHONE output volume.
- Line Out Channel Volume Slide Fader-Increase or decrease the LINE OUT channel volume.
- Input Channel LED Indicator-To indicate MIC and LINE IN volume status.
- Output Channel LED Indicator-To indicate HEADPHONE and LINE OUT volume status.
WARRANTY
- Every Fifine product comes with a Limited Warranty that, in normal use of the product, will be free of any defects in material or workmanship for a period of one year from its original date of purchase.
- For detailed warranty info, please refer to the warranty policy on our website or contact us directly.
CERTIFICATION
- Eligible to bear CE Marking.
- Authorized European Representative:
- Name: AOCE INFORMATION TECHNOLOGY
- Address: 61 rue de Lyon 75012 Paris, France
- Tel: +33-633297410
- Authorized British Representative:
- Name: AOCE LIMITED
- Address: Office Suite 29a 3/F 23 Wharf Street, London, England,
- SE8 3GG
- Tel: +44-
- 759 7659 775
Documents / Resources
 |
fifine SC3 Audio Mixer [pdf] User Guide SC3 Audio Mixer, SC3, Audio Mixer, Mixer |