FIBERBUILT Golf Game Instruction Manual

FIBERBUILT Golf Game

Product Specifications

• Product Name: Putting Green 4’x14′
• Model Number: T-760-4X14
• Dimensions: 4’x14′
• Parts Included: Rubber Base, Hardware, Grass Panels

Product Usage Instructions

Preparation
Ensure the ground is properly prepared for placement of the rubber base. The surface should be firm, packed, and level. Avoid placing on grass.

PARTS

Please check your box for accuracy. All of these pieces should be included.

RUBBER BASE

HARDWARE

GRASS PANELS

ASSEMBLY INSTRUCTIONS

1. Ensure the ground is properly prepared for placement of the rubber base. The surface should be firm, packed and level. Concrete, asphalt, patios or decking are ideal. (Do not place on grass.)
   Place the rubber base pieces (A, B, C) on the ground together as shown.
2. Insert the cups (G) all the way into the base corner pieces with holes (B). The tops of the cups will extend beyond the top of the base.
3. Secure rubber base pieces (A, B, C) together by pushing Connectors into adjacent holes in the sections. Optional Step: For increased security and stability, install and secure Connectors with pins from underneath as you assemble the base pieces. (If the mat will be regularly moved or disassembled, we recommend skipping the use of the pins.)
   Steps for securing the pins:
   • As you set base pieces next to each other, lift up the corners of the rubber base pieces and place a plastic push pin (F) into the holes from underneath.
   • From the top, push the rubber 2-pin (D) or 4-pin (E) Connectors into position, guiding them onto the plastic push pins.
   • Gently tap with a hammer until the connectors are flush with the base surface.
4. Lay the Putting Turf (H) on top of the base area to fit the holes over the putting cups and push down around the cups to secure the turf. NOTE: We ship our turf folded in the box for the most expedient shipping. During transit, the turf pieces may curl slightly. If your turf is curled upon delivery, we recommend laying the turf pieces flat in the sun for a couple of hours to allow them to relax and flatten prior to laying them down on the base.

WARRANTY

DOUBLE THE LIFE OF YOUR WARRANTY TODAY FOR FREE
For a free one-year extension to our standard warranty, exclusive access to insider deals, new product information and much more, register your mat today at: FiberbuiltGolf.com/register Be sure to select the following:

• PUTTING GREEN
• 4’X14’
• SKU#: T-760-4X14
• FiberbuiltGolf.com

FAQ