Fenix PB-E01 Flashlight Instruction Manual

Fenix-LOGO

Fenix PB-E01 Flashlight

Fenix-PB-E01-Flashlight-PRODUCT

Specifications

  • Model: PB-E01
  • Capacity: 5000mAh
  • Battery Cell: 21700
  • Parameter: Type-C
  • Lamp Bead: 1W LED
  • Output: 5V-2.4A (12W)
  • Input: 5V-2.4A (12W)
  • Hanging Rope: Type-C to Type-C
  • Color: Black and Yellow
  • Material: ABS+PC (V0 fireproof)+PC cutting lens
  • Flashlight: lamp head 1W
  • Size: 28 * 30 * 87mm
  • Weight: 118g

This device, equipped with a flashlight, is compact in size, making it perfect for travel and daily use. Easy to fit into pockets or bags, it is an essential accessory for active individuals who value time and convenience. The formula for calculating battery capacity is: actual capacity (mAh)=(nominal capacity x 3.7V x efficiency)/output voltage (5V). The efficiency of high-quality power banks is usually between 85% and 90% (0.85-0.9), while the remaining electricity is converted into heat. Taking a 5000mAh power bank with an efficiency of 90% (0.9) as an example: (5000mAh x 3.7V/5V) x 0.9=3300mAh.

Usage Instructions

  1. Connect the provided Type-C to Type-C hanging rope or any compatible Type-C cable to the input port of the PB-E01.
  2. Connect the other end of the cable to a compatible USB power adapter (not included) or a powered USB port.
  3. The device will begin charging. Refer to the device’s indicators (if any) for charging status.

Using the Flashlight

  1. Locate the power button for the flashlight function.
  2. Press the power button once to turn on the 1W LED flashlight.
  3. Press the power button again to turn off the flashlight.

Using it as a Power Bank

  1. Connect your device (e.g., smartphone, tablet) to the output port of the PB-E01 using a compatible Type-C cable.
  2. The PB-E01 will automatically begin charging your connected device.
  3. Disconnect your device once charging is complete.

Troubleshooting

  • Device not charging: Ensure the charging cable is securely connected to both the PB-E01 and the power source. Verify that the power source is active.
  • Flashlight not turning on: Check if the PB-E01 has sufficient charge. If the battery is depleted, charge the device first.
  • Connected device not charging: Ensure the cable connecting your device to the PB-E01 is functioning correctly and is securely plugged in. Try a different cable if necessary.
  • Slow charging: Ensure you are using a compatible 5V-2.4A (12W) power adapter for optimal charging speed.

Documents / Resources

PDF thumbnailPB-E01 Flashlight
Instruction Manual · PB-E01, PB-E01 Flashlight, PB-E01, Flashlight

References

Ask a Question

Use this section to ask about setup, compatibility, troubleshooting, or anything missing from this manual.

Ask a Question

Ask about setup, compatibility, troubleshooting, or anything missing from this manual. Name and email are optional.