FENGE F210 Frida Series Large Monitor Stand
IMPORTANT SAFETY INSTRUCTIONS
- Read the entire instruction manual before you start installation and assembly. If you have any questions regarding any of the instructions or warnings, please contact your local distributor for assistance.
- CAUTION: Use with products heavier than the rated weights indicated may result in instability causing possible injury.
- Mounts must be attached as specified in assembly instructions. Improper installation may result in damage or serious personal injury.
- Safety gear and proper tools must be used. This product should only be installed by professionals.
- Make sure that the supporting surface will safely support the combined weight of the equipment and all attached hardware and components.
- Use the mounting screws provided and DO NOT OVER-TIGHTEN mounting screws.
- This product contains small items that could be a choking hazard if swallowed. Keep these items away from children.
- This product is intended for indoor use only. Using this product outdoors could lead to product failure and personal injury.
IMPORTANT: Ensure that you have received all parts according to the component checklist prior to installation. If any parts are missing or faulty, telephone your local distributor for a replacement.
MAINTENANCE: Check that the bracket is secure and safe to use at regular intervals (at least every three months).
PARTS
Components Included
Tools Required
- Tools Required (Not included): B3, Cam bolt, Cam lock, Wrench, Sticker, Pad, 4mm, 3mm
ASSEMBLING INSTRUCTUIONS
Product Usage Instructions
- Identify and lay out all components as per the list provided in the manual.
- Use the wrench to assemble the parts together. Ensure all screws are tightened securely.
- Do not tighten the F-screw excessively to avoid damaging the product.
- Follow the provided diagram for correct assembly sequence.
FAQs
- Q: How do I know if I have assembled the product correctly?
- A: Ensure all screws are tightened securely and the components are aligned according to the diagram provided in the manual. If in doubt, refer back to the assembly instructions.
- Q: What should I do if I am missing a component?
- A: Contact customer support with your order details and they will assist you in obtaining the missing part.
- Q: Can I use additional tools for assembly?
- A: It is recommended to only use the tools provided or specified in the manual to avoid damaging the product.
Documents / Resources
 |
FENGE F210 Frida Series Large Monitor Stand [pdf] Installation Guide F210, F210 Frida Series Large Monitor Stand, Frida Series Large Monitor Stand, Large Monitor Stand, Monitor Stand |