FeiyuTech SCORP-C 2 Gimbal Stabilizer User Manual

Contents hide

1 SCORP-C 2 Gimbal Stabilizer

2 Specifications

3 Product Usage Instructions

3.1 Getting Started

3.2 Mounting the Shooting Equipment

4 Frequently Asked Questions (FAQ)

4.1 Documents / Resources

4.1.1 References

SCORP-C 2 Gimbal Stabilizer

Specifications

Power button

FPV button
F2 button

Screen
Shutter button

Mode button
Joystick

R button
Auto rotation button

L button
F1 button

1/4 inch thread hole
Knob function switching button

Multifunction knob
Roll lock

Indicator
Roll axis

Cross arm
Focus motor port 2

Extension port
Fixed plate

Quick release plate
Upper quick release plate

Tilt lock
Tilt axis

AI tracking camera
AI tracking indicator

Camera control port/USB-C power output port*
Focus motor port 1

Versatile arm
Pan axis

Pan lock
A/B button
Trigger button

Product Usage Instructions

Getting Started

2.1 Charging

Please fully charge the battery before powering on the gimbal
for the first time. Use a USB-C cable for charging, which supports
quick charge.

2.2 Adjusting the Gimbal to Balancing
Position

The gimbal is folded by default. Unlock all three axes, adjust
the gimbal to the balancing position, and then lock the three
axes.

Mounting the Shooting Equipment

3.1 Attach the Upper Quick Release Plate

Attach the upper quick release plate to the camera by tightening
the screw.

If the camera doesn’t have a 1/4-20 inch screw hole, place the
camera on a mount adapter with a 1/4-20 inch screw hole and then
follow the steps above to mount it.

3.2 Mounting Fixed Plate

Unlock the fixed plate lock, slide the fixed plate into the
slot, and then lock the fixed plate lock.

Frequently Asked Questions (FAQ)

Q: Where can I find tutorial videos for this
product?

A: Tutorial videos can be watched on the FeiyuTech official
website or by scanning the provided QR code.

Q: How do I download the Feiyu SCORP App?

A: You can download the app by scanning the QR code or searching
for Feiyu SCORP in the App Store or Google Play. The app is
compatible with iOS version 13.0 and Android version 10.0 or
higher.

Q: How should I charge shooting devices using the USB-C
power output port?

A: The USB-C power output port supports charging for shooting
devices that are compatible with the USB power supply protocol.

View Fullscreen

User Manual

Catalogue
1. Overview …………………………………………………………………………………………………… 1 2. Getting started ……………………………………………………………………………………………… 2
2.1 Charging……………………………………………………………………………………………………………… 2 2.2 Adjust the gimbal to gimbal balancing position ……………………………………………………………… 2
3. Mounting the shooting equipment …………………………………………………………………… 3 3.1 Attach the upper quick release plate …………………………………………………………………………… 3 3.2 Mounting fixed plate ……………………………………………………………………………………………… 3 3.3 Mounting quick release plate …………………………………………………………………………………… 4 3.4 Mount camera on gimbal ………………………………………………………………………………………… 4 3.5 Install lens holder (Optional)……………………………………………………………………………………… 4
4. Gimbal balancing ………………………………………………………………………………………… 5 4.1 Balancing the tilt axis ……………………………………………………………………………………………… 5 4.2 Balancing the roll axis …………………………………………………………………………………………… 6 4.3 Balancing the pan axis …………………………………………………………………………………………… 6
5. Power ON/ OFF ……………………………………………………………………………………………… 7 6. Function/Modes introduction ……………………………………………………………………………………… 8 6.1 Follow modes introduction ……………………………………………………………………………………… 8 6.2 Other function introduction ……………………………………………………………………………………… 9
7. App Connecting …………………………………………………………………………………………… 9 7.1 Connect App………………………………………………………………………………………………………… 9 7.2 Function introduction of Feiyu SCORP App …………………………………………………………………… 10
8. Operation ………………………………………………………………………………………………… 12 8.1 Button operation …………………………………………………………………………………………………… 12 8.2 Screen Icons Description ………………………………………………………………………………………… 15 8.4 Control ports………………………………………………………………………………………………………… 19 8.5 Specifications ……………………………………………………………………………………………………… 20
9. Specifications …………………………………………………………………………………………… 21

Tutorial
The tutorial videos can be watched at FeiyuTech official website or scan the QR code. https://www.feiyu-tech.com/play/
Download the App
Scan the QR code to download the app, or search for “Feiyu SCORP” in the App Store or Google Play. * Feiyu SCORP: OS V13.0Android V10.0

iOS

Android

1. Overview
* Camera not included.
[22] [23] [21] [14] [15] [13] [26] [27] [20] [19] [18] [17] [16] [3] [25] [24] [28] [29] [30] [4] [31] [5] [32] [6] [7] [8] [9] [2] [1] [33] [10] [11] [34] [12] [1] Power button [2] FPV button [3] F2 button [4] Screen [5] Shutter button [6] Mode button [7] Joystick [8] R button [9] Auto rotation button [10] L button [11] F1 button [12] 1/4 inch thread hole [13] Knob function switching button [14] Multifunction knob [15] Roll lock [16] Indicator [17] Roll axis [18] Cross arm [19] Focus motor port 2

[20] Extension port [21] Fixed plate [22] Quick release plate [23] Upper quick release plate [24] Tilt lock [25] Tilt axis [26] AI tracking camera [27] AI tracking indicator [28] Camera control port/USB-C power output port* [29] Focus motor port 1 [30] Versatile arm [31] Pan axis [32] Pan lock [33] A/B button [34] Trigger button
* Supports charging for shooting devices compatible with the USB power supply protocol

– 1 –

2. Getting started
2.1 Charging
Please fully charge the battery before power on the gimbal for the first time. Charging with USB-C cable, supports quick charge.

2.2 Adjust the gimbal to gimbal balancing position
The gimbal is folded by default, please unlock all the three axes and adjust the gimbal to gimbal balancing position, and then lock the three axes.
3

2 1
Gimbal folded position
– 2 –

Gimbal balancing position

3. Mounting the shooting equipment
Before mounting, please ensure that the mounted shooting equipment and accessories are within the load requirements. For camera setup steps, please refer to the relevant compatibility list. Visit https://www.feiyu-tech.com/feiyu-scorp-c-2/down.html to check the latest relevant compatibility and controllable device list. Before mounting the shooting equipment, make sure the camera is ready for shooting (Install the camera lens, and the lens cover should be removed, the memory card and battery needs to be inserted to the camera, and battery is fully charged) , complete all the steps which mentioned in chapter “2. Getting started” and the gimbal is adjusted to gimbal balancing position. Make sure the gimbal is powered off or in sleep mode before mounting the camera.
3.1 Attach the upper quick release plate
Attach the upper quick release plate to camera by tightening the screw.
If the camera doesn’t have the 1/4-20 inch screw hole, please put the camera on mount adapter, which has 1/4-20 inch screw hole, and then follow the steps above to mount it.
3.2 Mounting fixed plate
Unlock the fixed plate lock. Slide the fixed plate into the slot. Lock the fixed plate lock.
2 3
1
– 3 –

3.3 Mounting quick release plate
Unlock the quick release plate lock. Slide the quick release plate into the slot. Lock the quick release plate lock. Use the balancing knob to fine-tune the position of the quick release plate.
2 1
3
3.4 Mount camera on gimbal
Unlock the upper quick release plate lock. Slide the camera (mounted on the upper quick release plate) into the slot. Lock the upper quick release plate lock.
2 1
3.5 Install lens holder (Optional)
Install the lens holder on the quick release plate if needed, the rubber of the lens holder must be directly under the lens. It is recommended to use the lens holder when using a long or heavy lens.
– 4 –

4. Gimbal balancing

Please balance the gimbal before shooting. Take camera mounting as an example. Make sure the camera and lens are ready for

shooting, and the gimbal is powered off or in sleep mode before balancing.

Tutorial Videos

It is recommended to hold up the camera first, then move the slide arm, cross arm and vertical arm.

4.1 Balancing the tilt axis
4.1.1 Balancing the vertical tilt
Unlock motor lock A; lock motor locks B and C. Point the camera lens upward and observe its tilt direction. Unlock the fixed plate lock. Move the camera in the opposite direction of its tilt until the lens remains perfectly vertically upward. Lock the fixed plate lock, supporting the camera upward from below to ensure proper fixation.

A 1
B

4.1.2 Adjust depth for the tilt axis
Keep motor lock A unlocked; motor locks B and C locked. Place the camera lens pointing horizontally forward, and observe its tilt direction. Unlock the quick release plate lock. Move the camera opposite its tilt and use the balancing knob to fine-tune until the lens remains horizontally forward.

– 5 –

Lock the quick release plate lock, supporting the camera upward from below to ensure proper fixation.
If the camera remains stationary at a tilt angle of about ±45° , the tilt axis is balanced.

1
3 B C
4.2 Balancing the roll axis
Unlock motor lock B; lock motor locks A and C. Observe the camera’s swing direction. Unlock the cross arm lock. Move the camera opposite its swing until the cross arm remains level. Lock the cross arm lock. If the camera remains stationary at a horizontal angle, the roll axis is balanced.

2 3

C
4.3 Balancing the pan axis
Unlock motor lock C; lock motor locks A and B. Hold the handle and tilt the gimbal about 45° ,rotate pan axis until parallel with ground, then observe the camera’s swing direction. Unlock the vertical arm lock. Move the vertical arm opposite its swing until the vertical arm remains level. Lock the vertical arm lock.
– 6 –

If the camera remains stationary at a horizontal angle, the pan axis is balanced.

A B

C 1

2 3

5. Power ON/ OFF
Before power on the gimbal, make sure you have balanced gimbal, and unlocked all the three axes. If you haven’t unlocked all the 3 axes, gimbal will enter sleep mode to protect itself. Please single tap power button to wake up gimbal after unlocked all the 3 axes.
! Please set motor power first after powering on gimbal for the first time or after changing a new camera/lens.
Long press the power button and release it when you hear the beep sound to power on/off.

– 7 –

6. Function/Modes introduction 6.1 Follow modes introduction

OSD PF PTF FPV AL FFW

Mode PF mode PTF mode
FPV mode Lock mode FFW mode

Introduction
Pan follow, only the pan axis follows the movement of user’s hand.
Pan and tilt follow, where both the pan and tilt axes follow the movement of user’s hand, but roll axis does not.
Pan, tilt and roll follow, where all 3 axes follow the movement of user’s hand.
All 3 axes do not follow the movement of user’s hand, gimbal keeps the direction of the camera fixed.
Flash follow, where all 3 axes follow the movement of user’s hand in high follow speed.

PTF

FPV

Lock

FFW
– 8 –

6.2 Other function introduction
Auto rotation Camera will auto rotate to shoot according to the rotation speed and direction that set by users. It can be used to achieve the image rotating scene which been used frequently in movie Inception.
Portrait mode Enter portrait mode for recording portrait video or live streaming.
Selfie mode The camera turns 180° horizontally, selfie shooting is available.
Track video Record track video according to the waypoints which has been set.
Manual lock Manually move camera to desired position, and hold for half a second. New tilt /pan positions are automatically saved.
7. App Connecting
Download the App Scan the QR code to download the app, or search for “Feiyu SCORP” in the App Store or Google Play.
* Feiyu SCORP: OS V13.0Android V10.0

iOS

Android

7.1 Connect App
(1)Turn on the gimbal (2)Turn on the smartphone Bluetooth, run Feiyu SCORP App, tap the top of the home page to connect gimbal. After the connection succeed, it’s easy to control gimbal via App, including control the
– 9 –

pan and tilt axis angle with the virtual joystick, switch modes, set motor power/camera parameters/follow speed, set other functions, parameters, and update firmware.

7.2 Function introduction of Feiyu SCORP App

Current device

[1]

FY-XXXXXXXX

Device battery

100%

Scenario
[3]

Button settings
Knob settings

Motor power
[6]

Follow speed

[2] [11] [4] [12]

Current device
FY-XXXXXXXX
Device battery
100%
Joystick settings

[13] [5] [14] [17] [7] [16] [15] [18]

Camera settings
[8]

Horizon calibration

Device

Skill

[19] [10] [20] [9] [21] [22] [24] [23] [25] [1] Gimbal control access
Display the product name and device battery of current connecting gimbal, tap to enter gimbal operation interface, which allows user to use virtual joystick to control gimbal, switch follow modes, recenter gimbal, adjust horizontal angle manually. When not connected to gimbal, prompt user to connect with gimbal. [2] Disconnect device Tap to disconnect current connecting device.
[3] Scenarios Provide auto rotation (can be used to achieve the image rotating scene which been used frequently in movie Inception), panorama, timelapse (Motionlapse/Static timelapse/Hyperlapse) , track video and other usage scenarios for user.
[4] Button settings Set the function when press and hold the trigger button.

– 10 –

[5] Knob settings Set the control object for multifunction knob, can be set as control axes, control electronic focus, control focus motor. Set damp, speed, smooth and sound for multifunction knob in “More”.
[6] Motor power settings Adjust tilt, roll, pan axes motor power manually or use auto tune function to tune the motor power automatically (Recommended).
Please set motor power first after power on gimbal for the first time or after change a new camera/lens.
[7] Follow speed Select different preset gimbal follow speed profiles: Slow/Med/Fast, or custom follow speed and dead zone.
[8] Camera settings Can set camera aperture, shutter speed and ISO parameters after connecting with camera.
[9] Horizon calibration Calibrate the gimbal with the auto calibration function(Recommended) or adjust it manually (When not in FPV or FFW mode).
[10] More Set boot silent, disable selfie, manual lock, check firmware information and update firmware, restore the default settings.
[11] Back Tap to return to home page.
[12] Joystick settings Can set the joystick speed for controlling pan/tilt axis, and joystick as pan axis/tilt axis inverted.
[13] Recenter Tap to recenter the gimbal.
[14] Flash follow(FFW) Tap to enter Flash follow.
[15] Portrait mode Tap to enter portrait mode.
– 11 – [16] Selfie mode Tap to enter selfie mode. [17] Adjust horizontal angle Slide the slider to control roll axis to adjust the current horizontal angle. [18] Virtual joystick Use virtual joystick to control pan and tilt axis. [19] Lock mode Tap to enter lock mode. [20] Shutter Tap to take photo in photo mode. Tap to start/stop recording in video mode. [21] Switch between photo/video mode Tap to switch between switch between photo/video mode [22] Pan follow (PF) Tap to enter pan follow (PF) mode. [23] Pan and tilt follow (PTF) Tap to enter pan and tilt follow (PTF) mode. [24] FPV Tap to enter FPV mode. [25] Motion sensing mode Tap to enter motion sensing mode which can control the pan and tilt axis to follow the movement of smartphone, can not switch follow modes in motion sensing mode (PF/ PTF/FPV/Lock).
8. Operation
8.1 Button operation
– 12 –

Power button Long press: Power on/Power off Single tap: (1) Wake up(In sleep mode) (2) Display battery levels of the gimbal (When powered off) Double tap: Enter sleep mode
M button Single tap: PF mode(Default) /PTF/FPV (Switch in turn) Double tap: Recenter Long press for 3 seconds: Enter the auto tune Tap five times: Horizon calibration
Joystick Push (1) Control the movement of the tilt and pan axes. (2) Control album (3) Framing Adjustment (While AI Tracking)
Shutter button
Camera Connected Press half way: Focus Single tap (Fully): Start/stop recording Long press (Fully): Take photo
Auto rotation button Single tap: Enter auto rotation mode Single tap again: (1) Exit auto rotation mode (When gimbal is not rotating) (2) Pause the rotation (When gimbal is rotating)
L button
Single tap: Turn left continuously Single tap again: Switch rotating speed (Switch cyclically among Slow/Med/Fast orderly, the preset speed is Med) Active in auto rotation mode
R button
Single tap: Turn right continuously Single tap again: Switch rotating speed (Switch cyclically among Slow/Med/Fast orderly, the preset speed is Med) Active in auto rotation mode
– 13 –

F1 button Single tap: Enter/exit album Double tap: Enter/exit portrait mode Triple Tap: AI power on/off Long Press: Enter/Exit AI tracking (With AI Power enabled)
F2 button Double tap: Enter FFW mode
Trigger button Double tap: Recenter (in non-selfie mode) / Selfie recenter (in selfie mode) Triple tap: Enter/Exit selfie mode (Pan axis turn 180° ) Press and hold: Lock mode (Release to exit)
You can custom the function via App
FPV button Single tap: Enter FPV mode
A/B Button Long press: Mark the current position as A/B Single tap: Return to the position A/B that you have marked Can be used to mark axes/focus position.
Multifunction knob Turn: (1) Control the movement of the roll, tilt and pan axes. (2) Control electronic focus/zoom (3) Contol focus motor.
Set current control option as option (1) or (2) or (3) through long press the knob function switching button.
Knob function switching button Single tap: Switch the control object while controlling the movement of the 3 axes (Tilt/Pan/Roll) Long press: Switch the control options of Multifunction knob in turn (The movement of the 3 axes, electronic focus/zoom)
– 14 –

Key Combinations:
A: Joystick down + triple tap the F2 button: Clears all Bluetooth pairing information for the smartphone. After reboot, you can re-pair devices. B: Joystick up + triple tap F2 button: Clears all Bluetooth pairing information for the mirrorless camera. After reboot, you can re-pair the camera. C: Knob function switching button + FPV button: Press together to force the main body to power off within 1 second.
Note:
(1)When using a camera or the original camera app on your smartphone to capture photos or videos, some features may require specific camera or smartphone support. You can visit the official website to check the list of compatible devices: https://www.feiyu-tech.com/feiyu-scorp-c-2/
(2) We recommend using this product in conjunction with the Feiyu SCORP App. Operations marked with a are designed for use with smartphones paired with the Feiyu SCORP App.

8.2 Screen Icons Description

PTF

Power on logo

Sleep mode

Current work mode

PF mode

PTF

PTF mode

FPV

FPV mode

Lock mode

FFW

FFW mode

Custom Mode

Auto-Rotation Mode

Left Rotation Mode

Right Rotation Mode

– 15 –

PTF PTF PTF PTF PTF
PTF

Multi-function knob control object

Controlling the focus motor

Control electronic focus

Controlling the movement of the pan axis

Controlling the movement of the roll axis

Controlling the movement of the tilt axis

Shooting status
Horizontal shooting Vertical shooting Selfie mode

Bluetooth connection status
Smartphone bluetooth connected (Data transfer active) Smartphone bluetooth connected (No data transfer) No icon displayed when disconnected
Camera connection status
Camera bluetooth connected Camera wired remote connected Camera bluetooth & wired remote connected

Current battery status
100% 75% 50% 25% 0% Charging

AI Connecting

– 16 –

AI power oN

AI power oFF

Pairing with bluetooth remote

Clear bluetooth pairings

Clear camera bluetooth pairings

Mark position A

Mark position B

Return to the position A

Return to the position B

Auto tune

Calibrating

Calibration successful

– 17 –

E1—-Overheat protection

E2—-Handle idle protection

E3—-Overload protection

E4—-Vibration protection

E5—-Stabilizer internal error

8.3 AI Tracking
Triple tap the F1 button can turn AI power on or off. After turning on the AI power, the tracking module indicator light will remain solid red.
AI power is now on AI tracking is active

Under AI Power-On State, the following controls are available:
– 18 –

AI Gesture Control OK gesture (Left or right hand): Start tracking/Stop tracking Start tracking with the green light stays on.Repeat this gesture, stop tracking, enter standby mode with the red light stays on.Two gestures must be separated by 3 seconds. Thumbs opposite direction: Stop tracking Stop tracking, enter standby mode with the red light stays on. Spread palm (Left or right hand): Shutter In photo/video mode: Take photo or start recording after a 3-second countdown with beep sound. After started the recording, do the gesture again to stop recording. Double L-Shaped gestures: Custom framing Start framing, green light blinks fast. When the subject moves to the desired position, perform this gesture again to complete framing, and the green light stays on. Two thumbs up gesture: Disable gesture control In tracking mode, this gesture can disable the gesture control function. Once disabled, AI tracking can still be controlled via the buttons.
Button control Long press F1 button: Start tracking/Stop tracking Triple tap F1 button: AI power on/off Double tap Trigger button: Stop tracking
8.4 Control ports
There is a camera control port and extension port on the fixed plate, to control camera ,follow focus and other extension devices, the expansion port also enable AI firmware upgrades.
– 19 –

Camera control port Focus motor port 1

Extension por Focus motor port 2

Connect camera with shutter cable

8.5 Specifications

[1] Follow status indicator

TILT = Tilt axis

ROLL= Roll aixs

PAN = Pan axis

The indicator is on which means the

[1]

corresponding axis follows the movement of

user’s hand.

[2] [2] Camera/Bluetooth indicator [3] [3] Battery indicator

Green light: Power on / Charging complete Red light: Charging Red light flashing rapidly: Low power, will auto power off Light off: Power off

– 20 –

9. Specifications

Product name Product model

Feiyu SCORP-C 2 Handheld Gimbal for Camera FeiyuSC2

Rotatable Range

Tilt: +120° ~-200°±3° Roll: +70° ~-245°±3° Pan: 360°

Size (Mainbody)

About 292.1×250.4×65.7mm Folded

Weight (Mainbody) About 1320g (Not including tripod)

Payload Capability Battery life Battery Operating Voltage Compatible Cameras

About 3500g (Well-balanced) 14 Hours (Motion State) 4500mAh 6.8V-8.4V Sony, Canon, Nikon, Panasonic, Fujifilm, etc. (For specific camera and lens compatibility, please refer to the official website’s compatibility list.)

Bluetooth name: FY_SCORP3_C2_XX

List

[10] [11] [12] [1] [2] [3] [1] Main body x1 [2] Tripod x1 [3] Fixed plate x1 [4] Upper quick release plate x1 [5] Camera fixed screw x1 [6] Lens holder x1 [8] [4] [5] [6] [7] [9] [7] Lens holder screw x1 [8] Type-C Cable x1 [9] Type-C to Type-C Cable x1 [10] Quick release plate x1 [11] Hex key x1 [12] Manual x1

– 21 –

Notice: 1. Ensure the motors are not obstructed by external forces during power-on and operation. 2. DO NOT expose the gimbal to water or other liquids. 3. DO NOT disassemble the gimbal. If it is accidentally disassembled and malfunctions, send it to aftersales for repair. All related costs are the user’s responsibility. 4. Continuous operation may cause the motor housing to become hot. Operate with care. 5. DO NOT drop or strike the gimbal. Impact may damage it or cause malfunction. If abnormal operation occurs after a drop or impact, contact after-sales support immediately.
Storage and Maintenance: 1. Keep the gimbal out of reach of children and pets. 2. DO NOT leave the gimbal near heat sources (e.g., furnaces or heaters) or inside a vehicle on hot days. 3. Store the gimbal in a dry environment. 4. DO NOT overcharge or overdischarge the battery, as this can damage the cells. If unused for extended periods, charge it at least once a month. 5. DO NOT use the gimbal in environments that are excessively hot or cold.
Warning: Please read the user manual carefully before use. Improper use of this product may cause damage and pose a risk to your safety.

This document is subject to change without notice. – 22 –

Tutorial Videos

IC warning
This device contains license-exempt transmitter(s)/re-ceiver(s) that comply with Innovation, Science and Economic Development Canada’s license-exempt RSS(s). Operation is subject to the following two conditions: (1) This device may not cause interference. (2) This device must accept any interference, including interference that may cause undesired operation of the device. Le présent appareil est conforme aux CNR d’Industrie Canada applicables aux appareils radio exempts de licence. L’exploitation est autorisée aux deux conditions suivantes : (1) l’appareil ne doit pas produire de brouillage, et (2) l’utilisateur de l’appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d’en compromettre le fonctionnement.
IC Radiation Exposure Statement
This equipment complies with the limits of exposure to IC radiation defined for an uncontrolled environment. Cet équipement est conforme aux limites d’exposition aux rayonnements de la IC établies pour unenvironnement non contrôé.
FCC regulatory conformance
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference. (2) This device must accept any interference received, including interference that may cause undesired operation.
NOTE
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: – Reorient or relocate the receiving antenna. – Increase the separation between the equipment and receiver. -Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -Consult the dealer or an experienced radio/TV technician for help.
NOTE
The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications to this equipment. Such modifications could void the user’s authority to operate the equipment.
RF Exposure
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment.

Feiyu Gimbal Privacy Policy
Guilin Feiyu Technology Incorporated Company (hereinafter referred to as “Feiyu”, “we”, or “us”) understands the importance of your privacy and is committed to protecting it. This Privacy Policy (the “Policy”) applies to the gimbals we provide.
If under the laws of your jurisdiction you are considered a minor or do not have full legal capacity (hereinafter “Minor”), please carefully read and fully understand this Policy together with your legal guardian. You may use Feiyu products and services only after obtaining your guardian’s consent.
Please read this Policy carefully to ensure you understand how we handle your personal information. We will process your personal information in compliance with applicable laws and regulations, based on lawful and legitimate purposes and in accordance with the principle of good faith. If you have any questions about this Policy, you can contact us using the information provided on our website.
I. How we collect and use your personal information
Personal information is information recorded electronically or otherwise that relates to an identified or identifiable natural person, and does not include information that has been fully anonymized. Please note that definitions of “personal information” (also referred to as “personal data”) may vary in different countries or regions; for specifics, please refer to the personal information protection laws and regulations applicable in your location.
We adhere to the principles of lawfulness, fairness, and necessity when collecting and using your personal information for the purposes described below. We collect the personal information you voluntarily provide during your use of our products and services, or that is generated as a result of such use. If we need to use your personal information for any purposes not stated in this Policy, or to use information collected for one purpose for another purpose, we will notify you in a reasonable manner and obtain your consent again before such use.
(A) Collection of Personal Information
When you use our products/services, we will collect and use the following personal information:
1. To provide you with the “Gesture Control” service, when you enable the “Gesture Control” feature and make a gesture, the gimbal captures images of your head and hands. On-device AI analyzes your hand structure in real time to recognize the gesture command and activate the specified function.This processing is one-time only and is necessary to provide the service. Rest assured, we do not store any images of your head or data about your hand structure. You can turn off the AI camera at any time under More Settings > AI Power.
2. To provide you with the “AI Tracking” service, when you enable the “AI Tracking” feature during use, the gimbal captures images of your head and body. On-device AI analyzes your head and body structure in real time to track movement. This processing occurs only during each recognition session and is necessary to provide the service. We do not store or retain any of your head or body structure data.
3. In addition to the information described above, in order to provide you with customer support services, we may collect the content you submit to our support team.
4. The content of this Policy will be updated periodically. Specific updates will be detailed in the manual on our official website at https://www.feiyu-tech.com.
Please be informed and rest assured that we deeply respect and prioritize the protection of your personal privacy. We will not store any video or audio content or recordings generated during your communications using our device.

Guilin Feiyu Technology Incorporated Company

Website: www.feiyu-tech.com

E-mail: support@feiyu-tech.com

Tel: +86 773-2320865

V 1.0

Documents / Resources

FeiyuTech SCORP-C 2 Gimbal Stabilizer [pdf] User Manual
SCORP-C 2 Gimbal Stabilizer, SCORP-C, 2 Gimbal Stabilizer, Stabilizer

References

User Manual