FC RoHS Smart Plug User Manual
Warm Tips
- Only supports 2.4 GHz Wi-Fi network
- Simplified steps to install App on your smart phone or tablet on Apple/Google Play Store
- Works with Amazon Alexa, Google Home & IFTTT.
- For indoor use only.
Key Specifications
|
Color |
White |
|
Electrical Rating |
120V AC,60Hz,10A load
1200W general use |
| Working Temp |
-20 -50 °C |
|
WIFI Requirement |
2.4GHz Only |
| App support |
10S/Android |
Structure Introduction
- Smart Plug
- On/Off switch
How to connect Smart Plug to Wi-Fi network
- 1. Download Smart Life from
or 
- Download or scan the OR code and install the Smart Life App fore their iOS and Android. Once downloaded, the app will ask you to register your device. Enter your phone number or email. If you selected phone number, you will receive a text with a registration code. If you choose email, you will then create a password.
Attention: There’s no Registration Code needed if email method chosen.
Please note: there’re two modes configurations (Quick Mode / AP Mode) available for you to choose before adding the device to app. Quick Mode is recommended.
Quick Mode Configuration (Common)
- Make sure quick mode configuration is initiated: the indicator light blinks blue rapidly (twice per second). If it blinks blue slowly (once every 3 seconds), press and hold the power button on the Mini Smart Plug for 6 seconds until the indicator light blinks rapidly.
- Tap the icon “+” on the top right corner of “Smart Life”, choose your device type and enter into ” Add Device”
- Follow the on-app instructions to connect the Smart Plug to your Wi-Fi network.
- Once connected, the App will prompt the connection and click “Done”
- Now you can control the Smart Plug through Smart Life App. 6.Once the configuration is completed successfully, the indicator light will turn to solid red andthe device will be added to the “Device List”
AP Mode Configuration
- Make sure AP mode configuration is initiaed: the indicator light blinks blue slowly [once every 3 seconds]. If it blinks blue rapidly [twice per seconds], pres and hold the power button on the Smart Plug for 6 seconds until the indicator light blinks slowly.
- Tap the icon “+” at the top right corner of “Smart Life” tab and then select the device type [Electrical outlet] enter into the “Add Device” page, click ‘AP Mode” at the top right corner of “Add Device” tab to add device.
- Follow the in-app instructions to connect the Smart Plug to your Wi-Fi network.
- Once connected, the App will prompt the connection and click “Done”.
- Now you can control the Smart Plug through Smart Life APR
- Once the configuration is completed successfully, the indicator light will turn to solid red and the device will be added to the “Device List”.
Please note: you can add the Smart Plug to Echo/ Google Home following this instructions below. Or the one on the app (Open Smart Life App, go to “Profile” -> “Integration” , tap “Amazon echo “or “Google Home” and install).
How to connect Smart Plug to Amazon Alexa
- Launch Smart Life App, sign in your account and make sure Smart Plug is in device list.
- Modify device name so that Alexa can easily recognize such as: Living Room Light, Bedroom Light, etc.
- Minimize Smart Life App, then Launch the Alexa App and sign in your Alexa account and make sure you have at least one Alexa voice-controlled device installed like Echo, Echo dot, etc.
- In the upper left corner of Home page, click
button to show App menu:’ Then clicks Skills in the menu.
- Type in Smart Life in the search and click the search button next to it.
- Enable Smart Life to the skill, then sign in your Smart Life account to complete the account linking.
- After linked account successfully, you can ask Alexa to discover devices. Alexa will show all the discovered devices after 20 seconds.
- Back to Menu by clicking button, and then click “Smart Home “button.
- In Smart Home page, you can group your devices for different categories. Your Smart Life APP has been skilled with Alexa Now you can control your Smart Plug through Alexa.
How to connect Smart Device to Google Home
- Launch the Google Home App and made sure Google Home speaker is installed. If not, please follow Google Home Speaker installation instruction to complete the installation.
- Once Google Home is installed, in the upper left corner of App Home page, click button to show App menu. Then click “Home Control” in the menu.
- On ’Add device’ page. scroll down to find ’Smart Life” and then click it . Sign in Smart Life APP with your account and password.
Note: Choose Smart Life APP in the Dropdown menu to complete the account linking.
- After successful account linking,in Google Home App you can see all the smart devices from your Smart Life App account .You can assign rooms for each device .
- Now you can Google Home to control your smart devices you can say like:
- OK Google, turn on/off wall light
- OK Google, set bedroom light to red.
Warranty
The product carries a one-year warranty from purchase date.Please feel free to let us know what we can do to assist you when you have any product problem.
Made in China
Version 1.0
Documents / Resources
 | Smart Plug |
References
- User Manualmanual.tools
Published: August 17, 2021
Updated: August 22, 2021
Hi, I have used RoHS smart plugs for a while now but recently I have changed my router and now they will no connect to the internet even though I’ve put in the new password. Any ideas why please
How do I reconnect my smart plugs to the internet after changing my router and Wi-Fi password?
When you change your router or Wi-Fi password, your smart plugs cannot automatically update their internal settings. You must reset the plugs and re-add them to your app (typically the Smart Life app) as if they were new devices.
Follow these steps to reconnect:
If the rapid flashing (Quick Mode) fails, you can try AP Mode: hold the button again until the light flashes slowly, then select "AP Mode" in the app and connect your phone to the plug's temporary hotspot (usually named SmartLife-XXXX) before returning to the app to finish setup.
Read the full Q&A page
help please
cannot install the software for clone drive
all in i hdd docking
it asks for serial number and i inputted 2021-04-27-21:43:21 which was provided on botom of box YCLEDA898052407 also there
cannot install the software for clone drive
all in i hdd docking
it asks for serial number and i inputted 2021-04-27-21:43:21 which was provided on botom of box YCLEDA898052407 also there
How do I install the software for an all-in-one HDD docking station and what is the correct serial number format?
It appears there is a misunderstanding regarding the product. You are currently on the manual page for an FC RoHS Smart Plug, which uses the Smart Life or Tuya mobile apps and does not require "clone drive" software or a serial number for installation.
Based on your description of an "all in one hdd docking" station, you are likely trying to install disk cloning software (such as PCClone Ex or similar utilities) that often comes bundled with hard drive docks. Please consider the following:
Read the full Q&A page
Hello,
I bought 4 RoHS sockets via Amazon which I installed without difficulty. Today I wanted to light the lamps and there is only one that lights up. The other three no longer work, the light does not come on at all, even after pushing the switch for 12″. Are they definitely broken?
Thank you for your help
Bonjour,
J’ai acheté via Amazon 4 prises RoHS que j’ai installées sans difficulté. Aujourd’hui j’ai voulu allumer les lampes et il l’y en n’a qu’une qui s’allume. Les trois autres ne fonctionne plus, le voyant ne s’allume plus du tout, même après pousser sur l’interrupteur pendant 12″. Sont-elles définitivement en panne?
Merci de votre aide
I bought 4 RoHS sockets via Amazon which I installed without difficulty. Today I wanted to light the lamps and there is only one that lights up. The other three no longer work, the light does not come on at all, even after pushing the switch for 12". Are they definitely broken?
Thank you for your help
Bonjour,
J'ai acheté via Amazon 4 prises RoHS que j'ai installées sans difficulté. Aujourd'hui j'ai voulu allumer les lampes et il l'y en n'a qu'une qui s'allume. Les trois autres ne fonctionne plus, le voyant ne s'allume plus du tout, même après pousser sur l'interrupteur pendant 12". Sont-elles définitivement en panne?
Merci de votre aide
Why are three of my four RoHS smart plugs no longer powering on or responding to a 12-second reset press?
Based on the manual for the FC RoHS Smart Plug, if the indicator light does not come on at all even after holding the power button for 12 seconds, the devices may have suffered a hardware failure. However, please try the following steps to confirm:
If there is no light regardless of the outlet used or the duration of the button press, the units are likely defective. Since you purchased them via Amazon, it is recommended to contact the seller for a replacement or refund under the warranty mentioned in the manual.
Read the full Q&A page
Hello,
I bought 4 RoHS sockets via Amazon which I installed without difficulty. Today I wanted to light the lamps and there is only one that lights up. The other three no longer work, the light does not come on at all, even after pushing the switch for 12″. Are they definitely broken?
Thank you for your help
Bonjour,
J’ai acheté via Amazon 4 prises RoHS que j’ai installées sans difficulté. Aujourd’hui j’ai voulu allumer les lampes et il l’y en n’a qu’une qui s’allume. Les trois autres ne fonctionne plus, le voyant ne s’allume plus du tout, même après pousser sur l’interrupteur pendant 12″. Sont-elles définitivement en panne?
Merci de votre aide
I bought 4 RoHS sockets via Amazon which I installed without difficulty. Today I wanted to light the lamps and there is only one that lights up. The other three no longer work, the light does not come on at all, even after pushing the switch for 12". Are they definitely broken?
Thank you for your help
Bonjour,
J'ai acheté via Amazon 4 prises RoHS que j'ai installées sans difficulté. Aujourd'hui j'ai voulu allumer les lampes et il l'y en n'a qu'une qui s'allume. Les trois autres ne fonctionne plus, le voyant ne s'allume plus du tout, même après pousser sur l'interrupteur pendant 12". Sont-elles définitivement en panne?
Merci de votre aide
Why are three of my smart plugs no longer turning on or responding to the power button?
If your smart plugs show no indicator light even after pressing the power button for 12 seconds, they may have experienced a hardware failure or a tripped internal safety mechanism. However, before concluding they are broken, please try the following steps:
If there is absolutely no light or response after trying different outlets, the units may be defective. The manual notes a one-year warranty from the purchase date; you should contact the Amazon seller or the manufacturer for a replacement if they are within this period.
Read the full Q&A page
i have bought numerous like this. everytime afer few weeks it goes offline and keeps blinking rapidly. cannot find a solution online.
Why does my smart plug go offline and blink rapidly after a few weeks of use?
When your smart plug blinks rapidly, it has entered Quick Mode Configuration (pairing mode), indicating it has lost its connection to your Wi-Fi network. Since this is a recurring issue after several weeks, please try the following troubleshooting steps:
If the device frequently resets itself to factory settings (blinking mode) without a power outage or manual reset, the hardware may be defective.
Note: If the light blinks slowly (once every 3 seconds) instead of rapidly, it is in AP Mode configuration.
For further support, you can contact the developer at volcano@volcano-smart.com.
Reference: FC RoHS Smart Plug User Manual Version 1.0 (Quick Mode Configuration section). View Manual
Read the full Q&A page
I’m having trouble with the plugs from RoHS.
After time the plugs stop working.
I have made a video public on YouTube. If by any chance you don’t reply or help I will leave this video for the general public to review https://youtu.be/3FxmArF-vYM?si=G-3xYR397e71BZrC
After time the plugs stop working.
I have made a video public on YouTube. If by any chance you don't reply or help I will leave this video for the general public to review https://youtu.be/3FxmArF-vYM?si=G-3xYR397e71BZrC
Why do my FC RoHS smart plugs stop working after some time?
If your FC RoHS smart plugs are stopping or losing connection over time, there are several troubleshooting steps you can take based on the manual and common Smart Life app issues:
Read the full Q&A page