WIRELESS KEYBOARD

User Manual

PACKING LIST

1. Keyboard x 1
2. USB Receiver x 1
3. Charging Cable x 1
4. User Manual x1
5. Instruction Card x 1
6. FAQ Card x 1

INSTRUCTIONS

Initial Use:

1. Please charge the Maybesrid when you use it for the first time.
2. Turn on the switch on the upper right corner of the keyboard, and It Is in the factory default 2.4G mode.
3. Take out the USB receiver and plug it into the computer. When the driver is installed successfully, the product will start to serve.

Mode Switch:
BT1 Mode

1. Short press BT1 mode switch button and its indicator will flash slowly showing that the keyboard is in BT1 mode.
2. Long press BT1 mode switch button for 3s and its indicator will flash quickly showing that the keyboard enters a pairing state. Turn on the Bluetooth of your laptop, If your computer system is Win 7 or earlier, please select to connect “BT3.0 Keyboard”. If your device system is Win 8 or later, iOS or macOS, please select to connect “BT5.0 KB”.

BT2 Mode
Refer to BT1 connection instructions.

DIAGRAM

1. Multi-mode Switch. The product supports 2.4G, BT1 and BT2 connections. It can be connected with and control 3 devices User can switch modes via the corresponding mode switch button to control the corresponding device.
2. Integrated Holder. The top integrated holder can hold phones, tablets or other mobile devices easily. It can maintain an appropriate angle to make you easy to read when typing.
3. Rechargeable Design. Built-in large capacity Lithium battery, It can be recharged via the attached charging cable. When the keyboard is in low battery Level it’s red power indicator light will flash. Its red charging indicator light steys on when charging and turns off when finished charging.
4. If your device system is iOS or macOS, it suggested connecting “BT5.0 KB” via Bluetooth. And the keyboard function will automatically adapt to iOS or macOS system.

MULTIMEDIA SHORTCUTS

Default functions	Stop	Previous Track	Pause	Next Track	Page
Default functions	Lock Screen	Backlight Brikrh Mess Adjustment		Backlight Color Switch
Default functions	On-screen Keyboard	Decrease	Increase Brightness	Mute	Decrease Volume
	Fl	F2	F3	F4	F5
Default functions	Increase Volume	Print Screen	Search	Change Language	2.4G Mode Key
FN Combination Function	F6	F7	F8	F9	F10

Default Function	BT1 Mode Key	BT2 Mode Key
FN Combination Function	F11	F12

Solution to Keyboard’s 2.4G mode connection issue

1. Turn on the power switch and switch the keyboard to 2.4G mode.
2. Press FN and button for 3-5 seconds and release until the Indicator of 2.4G mode flashes.
3. Plug the receiver Into the computer, It Is successfully connected when the indicator of 2.4G mode stops flashing. It can work then.

Solution to keyboard’s BT1 mode connection issue

1. Clear the Bluetooth connection list of computer
2. Turn on the power switch and switch It to mode.
3. Long press the button of mode for over 3s and release until Its indicator light flashes.
4. Turn on the Bluetooth of the computer. If your computer system is Win 7 or earlier, please select to connect “BT3.0 Keyboard” If your device system is Win 8 or later, iOS or macOS, please select to connect “BT5.0 KB”. The keyboard’s mode can work after a successful connection.

BT2 Mode
Refer to BT1 mode solutions,

NOTE

If the product is still unworkable after the above solutions, you could repeat those steps a few times. If your problem can’t get solved yet, please contact our Customer Service for help
(Email: support@Ifatelegend.com).

FCC Statement

This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
  The device has been evaluated to meet general RF exposure requirements. The device can be used in portable exposure conditions without restriction.

Documents / Resources

Fatelegend PC346A Wireless Compact Bluetooth Keyboard [pdf] User Manual PC346A, 2AOXY-PC346A, 2AOXYPC346A, PC346A Wireless Compact Bluetooth Keyboard, Wireless Compact Bluetooth Keyboard

References

• User Manual