i12 Audio Intercom
Product Information
Specifications
- Model: i12
- Screen: 10/100Mbps
- Button: 1
- 2 SIP lines
- Duplex speaker phone (HF)
- Intelligent DSS Keys (Speed dial)
- Wall-mount installation
- 2 embedded short circuit input interfaces
- 2 embedded short circuit output interfaces
- Support 4 controlled events: remote DTMF, remote server’s
commands, interaction with short circuit input, talking status - Output interface for active speaker
- Audio record output interface
- External Power Supply
- Multicast
- All in ONE: Radio and intercom, intelligent security
function - Industrial Standard Certifications: IP65, IK10, CE/FCC
Product Usage Instructions
Intercom Functionality
The i12 IP Intercom supports intercom features such as call log,
speed dial, auto-answering, voice messaging, and local 3-way
conference.
Networking Setup
Configure the IP settings using Static, DHCP, or PPPoE. Utilize
Network Access Control protocols like 802.1x and set up VPN options
such as L2TP and OpenVPN for secure connections. Implement VLAN and
QoS settings for network optimization.
Deployment & Maintenance
Enable auto-provisioning via FTP/TFTP/HTTP/HTTPS/DHCP OPT66/SIP
PNP/TR-069 for easy setup. Access the web management portal for
configuration management, firmware upgrades, and syslog
monitoring.
Physical Installation
Mount the intercom using CAT5 cables or better. Connect to power
using an adapter (10~14V/1.5A DC) or PoE. Ensure proper working
temperature (-40~70°C) and humidity (10~90%) conditions for optimal
performance.
FAQs
Q: What certifications does the i12 IP Intercom have?
A: The i12 holds Industrial Standard Certifications including
IP65, IK10, CE, and FCC for quality assurance.
Q: How can I configure the network settings?
A: You can configure the network settings of the i12 IP Intercom
using Static, DHCP, or PPPoE options in the device settings.
i12 IP Intercom
The front plat of this model is aluminum alloy material with cast aluminum back plate, it makes sure that this model support waterproof, dustproof function and IP65 protection level; We also use build-in tamper-proof detector to prevent external destroy.
Highlights
Support one call key and two keys mode to choose. With voice record output, can connect to hard disk video recording.. Two input, support to connect with infrared probe, door sensor, vibration
sensor and emergency button etc., build the security linkage.
Two output, can connect with alarm lamp, locks and other equipment, control
the security linkage through DTMF, remote server or two output input linkage controller.
With external active speaker output interface, support HD voice (G.722)
background music broadcast.
High compatibility Compatible with major platforms: Aterisk,Broadsoft,3CX,
Metaswitch, Elastix, Avaya etc.
Model i12
Screen 10/100Mbps
Button 1
Camera ×
Generic
2 SIP lines Duplex speaker phone (HF) Intelligent DSS Keys(Speed dial) Wall-mount installation 2 embedded short circuit input interfaces 2 embedded short circuit output interfaces. Support 4 controlled
events: remote DTMF; remote server’s commands; interaction with short circuit input; talking status Output interface for active speaker Audio record output interface External Power Supply Multicast All in ONE: Radio and intercom, intelligent security function Industrial Standard Certifications: IP65, IK10, CE/FCC
Call Features
Intercom Speed Dial Auto-Answering (per line) Voice Message (on server) Local 3-way Conference
Intercom Function
Call log (900 entries, in/out/missed) Programmable DSS/Soft keys Network Time Synchronization Action URL / Active URI
Audio
Narrowband Codec: G.711a/u, G.723.1, G.726-32K, G.729AB Wideband Codec: G.722 Duplex intercom with Acoustic Echo Canceller (AEC)-Hands-free
mode, 96ms tail-length Voice Activity Detection (VAD) / Comfort Noise Generation (CNG)
/ Background Noise Estimation (BNE) Packet Loss Concealment (PLC) Dynamic Adaptive Jitter Buffer up to 300ms DTMF: In-band, Out-of-Band DTMF-Relay (RFC2833) / SIP INFO Omnidirectional pickup: the maximum pickup distance is up to 5
meters
Networking
Physical: 10/100 Mbps Ethernet
IP Configuration: Static / DHCP / PPPoE Network Access Control: 802.1x VPN: L2TP (Basic Unencrypted) / OpenVPN VLAN QoS
Protocols
SIP2.0 over UDP/TCP/TLS RTP/RTCP/SRTP STUN DHCP LLDP PPPoE 802.1x L2TP OpenVPN SNTP FTP/TFTP HTTP/HTTPS TR-069
Deployment & Maintenance
Auto-Provisioning via FTP/TFTP/HTTP/HTTPS/DHCP OPT66/SIP PNP/TR-069
Web Management Portal Web-based Packet Dump Configuration Export / Import Firmware Upgrade Syslog
Physical Specifications
1 or 2 DSS keys (Speed Dial) RJ45 Ethernet Jacket x2: Network x1, PC x1 (Bridged to Network) Main Chipset: Broadcom Passive Switch: Normally Open and Normally Closed highest at
30V/1A AC/DC Output interface for active speaker Audio record output interface 2 embedded short circuit input interfaces 2 embedded short circuit output interfaces Speaker: 3W/4 Cables: CAT5 or better Power Supply: 10~14V/1.5A DC or PoE Power Consumption (Adapter)1.08~2.76W Power Consumption (PoE)1.43~3.52W Shell Material: Front plate, aluminum alloy. Back plate, Cast
aluminum Protection level: IP65 and IK10 Working Temperature: -40~70 Storage Temperature: -40~70 Working Humidity: 10~90% Qty/CTN10 PCS N.W/CTN:11.6kg G.W/CTN:12.25kg Overall Dimension: 195x120x39mm (W x H x L) Package Dimensions: 260x165x62mm (W x H x L) Outer CTN dimensions: 348x328x280mm (W x H x L)
The above specifications may be updated in the future without prior notice. All hardware/software/physical features should be based on the final shipped products. For more information, please visit: www.fanvil.com Compatibility List:
www.fanvil.com Add: 13th Floor, Building 2, Runzhi R&D Center, Xin’an Street, Bao’an District, Shenzhen, China Tel: +86-755-2640-2199 Fax: +86-755-2640-2618 Email: sales@fanvil.com
Documents / Resources
 |
Fanvil i12 Audio Intercom [pdf] User Manual i12, i12 Audio Intercom, i12, Audio Intercom, Intercom |