Fanvil CS40 LINKVIL USB Bluetooth Speakerphone
Product Usage Instructions
- Connect the USB cable to a power adapter or a PC.
- Plug the other end of the USB cable into the speakerphone to charge it.
- To power on/off the speakerphone:
- Hold the Power button for 2 seconds.
Using Bluetooth
To pair with a Bluetooth device:
- Hold the Bluetooth button for 1 second to enter pairing mode.
- On your PC or smartphone, select “Linkvil CS40” from the device discovery list to pair.
FAQ
- Q: How do I know if the speakerphone is fully charged?
- A: The LED bars will indicate the charging status. When all bars are lit, the speakerphone is fully charged.
- Q: Can I use the speakerphone while it is charging?
- A: Yes, you can use the speakerphone while it is charging for continuous operation.
CS40
- Conferencing Speakerphone
To Charge
- Connect the USB cable to a power adapter or a PC to charge the speakerphone.
© 2024 FANVIL Technology Co., Ltd.
All rights reserved. No parts of this publication may be reproduced or transmitted in any form or by any means, electronic or mechanical, photocopying, recording, or otherwise, for any purpose, without the express written permission of FANVIL Technology Co., Ltd.
Conferencing Speakerphone
CS40 Conferencing Speakerphone
To Use
- Power ON/OFF: Hold Power button for 2s.
Bluetooth pairing
- Hold the Bluetooth button for 1s to enter pairing mode.
- Choose “Linkvil CS40” in the device discovery list on the PC or smartphone.
CONTACT
- Tel: +86-755-2640-2199 EMail: sales@fanvil.com
- Web: www.fanvil.com
- Fanvil Technology Co., Ltd.
Documents / Resources
 |
Fanvil CS40 LINKVIL USB Bluetooth Speakerphone [pdf] User Guide CS40 LINKVIL USB Bluetooth Speakerphone, CS40 LINKVIL, USB Bluetooth Speakerphone, Bluetooth Speakerphone, Speakerphone |