Fanvil A330 Installation Guide

Fanvil-logo

Fanvil A330

Fanvil-A330-product

Packaging list

Fanvil-A330 (2)

Screen icon

Fanvil-A330 (3)

Keys features

Fanvil-A330 (4)

Device Installation

Desk Mount Method

Fanvil-A330 (5)

Connecting the Device

Please connect the power adapter, network, PC, handset, and headset to the corresponding ports as detailed in the diagram below.

  1. TF Card Slot: Supports external SD cards up to 256 GB.
  2. USB Port: Connects USB devices (USB flash drive).
  3. Type-C Port: Compatible with multiple devices.
  4. Alarm Input: Connects alarm sensors to trigger preset alarms.
  5. RS-485 Port: GND, RS-485A, RS-485B.
  6. 1 Short-Circuit Output: Controls electric locks, alarms, etc.
    • NC: Connected when idle (normally closed).
    • COM: Relay contact (common terminal).
    • NO: Disconnected when idle (normally open).
  7. HDMI Port: Connects external displays for HD video and audio transmission.
  8. LINE IN: Connects broadcast servers, external audio sources, etc.
  9. LINE OUT: Connects power amplifiers, etc.
  10. Power Port: Connects power adapter, DC 12V, 3A.
  11. Network Port: Connects to LAN or Internet.
  12. PC Port: Connects to computer’s network port.
  13. Headphone Port: Connects headphones.
  14. Handset Port: Connects IP Phone handset.

Note: When powered via PoE, if external devices with additional GND connections (such as HDMI or USB-C display devices) are used, it is recommended to connect the PoE power first, and then plug in the external interfaces.

Fanvil-A330 (8)

Camera Adjustment

  1. Shutter: Move the slider to block the camera lens
    Fanvil-A330 (6)
  2.  Angle Adjustment: Turn the knob to adjust the camera vertical angle.
    Fanvil-A330 (7)

Configuration

Configuration via Phone

  1. Press the Phone Settings icon Fanvil-A330 (8) Advanced SettingsFanvil-A330 (1). (The default password is “admin”.)
  2. Select SIP Settings > Select Line.
  3. Enable Registration Status, then input the Server Address, Server Port, Username (Authentication User), and Password.

Configuration via Web Browser

  1. Retrieve the IP Address: Press the Phone Settings iconFanvil-A330 (8)   Status > Common to find the device’s IP address.
  2. Log In: Input the IP address into a web browser. The PC and the phone must be in the same IP address segment. The default username and password are both “admin”.
  3. Configure: Go to Network/Line configuration menus, enter the relevant details, and save the settings.

Language Settings

  1. Press the Settings iconFanvil-A330 (8) System Settings Fanvil-A330 (8)System Language.
  2. Select the desired language.

Documents / Resources

PDF thumbnailA330
Installation Guide · Fanvil, Fanvil Technology Co. Ltd., A330, Phone, VoIP

References

Ask a Question

Use this section to ask about setup, compatibility, troubleshooting, or anything missing from this manual.

Ask a Question

Ask about setup, compatibility, troubleshooting, or anything missing from this manual. Name and email are optional.