FANTECH Maxfit61 RGB Mechanical 
Keyboard User Manual

FANTECH Maxfit61 RGB Mechanical Keyboard User Manual

Instruction manual

Thank you for purchasing FANTECH MAXFIT6 l MK857 Mechanical Keyboard.
The MAXFIT61 features hot-swappable switches for Cherry, Gateron, and Icily branded switches. There ls no need to Install any drivers for your first use.

Technical specification

  • Product Name: MAXFIT61 MK857 RGB Mechanical Keyboard
  • Numbered keys: 611,:eys
  • Switch type: Mechanical
  • Anti-Ghosting: All keys
  • Size: 294(L)xl □ J(W)x42IH)mm
  • Weight: 566gr

Size

FANTECH Maxfit61 RGB Mechanical Keyboard User Manual - Size

Secondary functions

FANTECH Maxfit61 RGB Mechanical Keyboard User Manual - Secondary Functions FANTECH Maxfit61 RGB Mechanical Keyboard User Manual - Secondary Functions

Download our Manual / Software from our official website www.lantechwortd.com

FANTECH Maxfit61 RGB Mechanical Keyboard User Manual - Download our Manual

Software

FANTECH Maxfit61 RGB Mechanical Keyboard User Manual - Software FANTECH Maxfit61 RGB Mechanical Keyboard User Manual - Software

How to use

Change switches and keycaps

  1. Remove keycap
    FANTECH Maxfit61 RGB Mechanical Keyboard User Manual - Remove Keycap
    Use the Keycap puller tool to clamp on a keycap and pull upward. to detach keycap from switch. Sometimes the switch may come out as well if the keycap is secured tightly on switch, which is normal. For longer keys such as the space bar, always clomp and remove from the MIDDLE of the keycap.
  2. Remove switch
    FANTECH Maxfit61 RGB Mechanical Keyboard User Manual - Remove switch

    Use the switch puller to push in the two tabs located on the top and bottom side of the switch. Once they ore pushed in, pull upwards to remove switch from keyboard case. Warning: It is very easy to scratch your keyboard case with lilies tool, so take caution when removing switches!
  3. Insert switch
    FANTECH Maxfit61 RGB Mechanical Keyboard User Manual - Insert switch

    When inserting o new switch, align switch to holes on the keyboard, and insert straight dove. There should be minimal resistance and the switch should pop into the Frome of the keyboard. It is recommended at this time to hove o Notepad ready on your PC, open it and make sure the switch works twine you press It. If the switch does not light up, or the key doesn’t show up on your PC when you press It, then the switch was not inserted properly. Remove switch, and make sure pins ere straight then insert ongoing.
    • Note: II is safe lo swop switches who your keyboard l! plugged in to your PC
  4. Insert keycap
    FANTECH Maxfit61 RGB Mechanical Keyboard User Manual - Insert Keycap

    Once you have confirmed the switch was properly inserted, snap back In the appropriate keycap.

How to connect

FANTECH Maxfit61 RGB Mechanical Keyboard User Manual - How to Connect

Documents / Resources

FANTECH Maxfit61 RGB Mechanical Keyboard [pdf] User Manual
Maxfit61 RGB Mechanical Keyboard, Maxfit61, RGB Mechanical Keyboard

References

Leave a comment

Your email address will not be published. Required fields are marked *