FANCYLEDS FSB3P2.1 Fancy Sync Box
Included Items
- Fancy Sync Box x1
- HDMI Cable x1
- Type-C RGBIC LEDS x1
- Power Adaptor x1
- L Brackets x4
Fancy Sync Box Indicator
Installation
Installing
Locate the adhesive strips included with your brackets. Peel off the protective backing from one side of each strip and firmly attach it to the bendable brackets. Then, flex the brackets to better fit the contours of your TV. Finally, place them on your TV in each corner.
Setup Options
LED Starting
Placement Instructions for the two setup options are available on pages 4 and 5. The diagram illustrates how to arrange the LED strip by selecting a bottom corner and then going up and around the perimeter until you return to the same starting bottom corner. Choose the side that is most convenient for you; there is no preferred side. The red line represents the LED strip, while the blue line represents the wire/USB-C at the beginning of the LED strip.
IMPORTANT: Only choose one option.
Option 1
Left Sided Setup (<)
Starting at the bottom left corner at the back of your TV, with the USB-C side of the LED strip, unravel the LED strip and peel off the protective backing to expose the adhesive. Adhere to the strip by following your TV’s edge: upwards to the top left, across to the top right, downwards to the bottom right, and back across to the bottom left.
Cutting Excess
LEDS It is likely you will now have an excess LED strip that needs to be cut. The green circle on the diagram indicates the only place where you can cut the LED strip. You are required to cut the LEDs to create a perfect 16:9 ratio rectangle along your television’s perimeter. The green dotted line illustrated below indicates where to cut the strip.
Option 2
Right-Sided Setup (→)
Starting at the bottom right corner at the back of your TV, with the USB-C side of the LED strip, unravel the LED strip and peel off the protective backing to expose the adhesive. Adhere to the strip by following your TV’s edge: upwards to the top right, across to the top left, downwards to the bottom left, and back across to the bottom right.
Cutting Excess
LEDS It is likely you will now have an excess LED strip that needs to be cut. The green circle on the diagram indicates the only place where you can cut the LED strip. You are required to cut the LEDs to create a perfect 16:9 ratio rectangle along your television’s perimeter. The green dotted line illustrated below indicates where to cut the strip.
Connecting
Connect the LED Strip
Connect the USB-C LED Strip to the ‘LED STRIP’ port.
Connect Your HDMI Device & TV
Unplug your compatible HDMI device (e.g., PS5, Apple TV, etc.) from your TV and connect it to one of the three ‘Input’ HDMI ports on the Fancy Sync Box. Then, use the provided HDMI cable to connect the HDMI OUTPUT port of the Fancy Sync Box to the HDMI port on your TV.
HDMI OUTPUT PORT: You are required to connect your TV/monitor.
HDMI 1, HDMI 2, HDMI 3 INPUT PORTS: You are required to connect compatible HDMI device(s) (e.g., PS5, Xbox, Apple TV, Amazon Fire Stick, etc.) to these input ports.
Connect The Power Adaptor
Connect the other end of the power cable to the DC port on the Fancy Sync Box, then plug the power adapter into a power socket in your home.
Download Our App
Download & install the Fancyleds
App Available on App Store and Google Play or scan the barcode below.
Open the app & register an account.
Open the app and register an account. This account can be used across multiple devices, allowing various individuals to control the Fancy Sync Box from their phones. Ensure your phone is connected to a 2.4 GHz WiFi connection and that both Bluetooth and location settings are activated. Click on the blue “+” icon at the top right corner of the app and select ‘Add Device. The Fancy Sync Box will automatically appear on the page, at which point you can add the device.
WiFi Issues – Reset Button
If the Fancy Sync Box is not connecting, hold the ‘WiFi Reset’ button for 5 seconds, then release. This will reset your connection to the app / when WiFi issues occur.
The WiFi indicator on the front of the Fancy Sync Box has the following meanings:
- Flashing slowly: Ready to connect
- Flashing rapidly: Connecting
- Solid light: Connected
App Settings
LED Strip Starting Corner
To calibrate your setup, open the Fancyleds app and tap on the Fancy Sync Box icon. Then navigate to the settings tab and modify the ‘LED Strip Starting Corner’ according to the setup option you selected —either left-sided or right-sided. This ensures that the colors sync correctly with the screen and do not appear mirrored.
Scene Mode CEC
This particular switch allows you to decide if the LEDs should automatically turn on or off with your TV when a scene mode from the ‘Scene’ tab is activated. The Sync mode is permanently CEC enabled.
Sync Mode
Diffusion
Low, Medium, and High diffusion modes significantly affect the level of reactivity in the LEDs. With Low mode, you will see a maximum of four colors at once, Medium allows for twelve colors, and High displays as many colors as possible. The speed of diffusion in each mode controls the transition rate from full illumination to the off state, reducing flickering where necessary. Recommended: Medium at 60% diffusion.
Voice Control
Fancyleds Voice
Connection After setting up your Fancy Sync Box, open the Fancyleds app, navigate to settings, and choose your voice connection service. Link your account by following the instructional prompts. Search for or select ‘Fancyleds’ as required (e.g., as a Google Assistant skill).
FAQs
My phone will not connect to the app.
- Confirm you have a 2.4 GHz WiFi connection (confirm with modem manufacturer).
- Check the app permissions in the settings of your phone and enable location, WiFi, and Bluetooth.
- Remove the Fancy Sync Box icon from the app.
- Remove the power cable, wait for 5 seconds, reinsert it, then hold the WiFi reset button for 10 seconds to reset.
- If it still does not connect, reattempt the steps above using a different mobile device.
My TV is not syncing with my LEDs?
You are required to connect an HDMI device to the input slot on the Fancy Sync Box. A compatible HDMI device is required for the syncing of the LEDs; integrated apps on the TV will not be synced. As such, if you would like to watch Netflix for example with synced LEDs, you will have to watch using a compatible HDMI device like an Xbox or Amazon Firestick. If you have a compatible HDMI device connected, make sure it is inserted into the ‘Input port & your TV / Monitor is connected to the ‘Output’ port.
The end section of the LED strip is not lighting up?
If the LED bulbs are not turning on at the end of your LED strip, or there is a section not working, you may have a malfunction. Please contact support.
How can I contact support for extra help?
Scan the QR or email: help@fancyleds.com
Documents / Resources
 |
FANCYLEDS FSB3P2.1 Fancy Sync Box [pdf] User Guide FSB3P2.1 Fancy Sync Box, FSB3P2.1, Fancy Sync Box, Sync Box, Box |