falmec 110031206 Pro Plus Built-in Group Instruction Manual

110031206 Pro Plus Built-in Group

Specifications:

  • Brand: Professional
  • Model: Gruppo Incasso Pro Plus
  • Weight: 13 kg
  • Dimensions: 755mm x 566mm x 241mm

Product Usage Instructions:

Installation:

Before installing the hood, carefully read the safety
instructions provided in the manual.

Technical Features:

The technical specifications of the product can be found on
labels inside the hood.

Positioning:

Place the hood in a suitable location for optimal
performance.

Electrical Connection:

This should be carried out by qualified personnel. Follow the
electrical connection guidelines provided in the manual.

Exhaust System:

For external evacuation mode, connect the hood to an external
outlet using appropriate tubing.

Operation:

Ensure proper ventilation and operation of the hood. Clean or
replace filters every 30 hours of use.

FAQ:

Q: How often should I clean or change the filters?

A: The metallic filters should be washed every 30 hours of use.
Refer to the maintenance section for detailed instructions.

Q: What should I do in case of simultaneous operation with
other gas-fueled appliances?

A: Ensure adequate ventilation in the room to prevent negative
pressure build-up. Follow safety guidelines for proper usage.

“`

Professional
Gruppo Incasso Pro Plus

INSTRUCTIONS BOOKLET
LIBRETTO ISTRUZIONI IT INSTRUCTIONS BOOKLET EN GEBRAUCHSANWEISUNG DE MODE D’EMPLOI FR MANUAL DE INSTRUCCIONES ES

RU INSTRUKCJA OBSLUGI PL HANDLEIDING NL MANUAL DE INSTRUÇÕES PT BRUGSANIVSNINGER DA

INSTRUKTIONSBOK SV OHJEKIRJA FI BRUKSANVISNING NO

GRUPPO INCASSO PRO PLUS 13 kg

755

566

241

327 304

119

min .10 / max. 28 8 9

274

245

150 791
762
IT – MISURE FORO PER INCASSO UK – HOLE MEASUREMENTS FOR INSTALLATION DE – LOCHABMESSUNGEN FÜR EINBAU FR – MESURES DU TROU POUR ENCASTREMENT ES – MEDIDAS ORIFICIO PARA EMPOTRADO RU – PL – WYMIARY OTWORU DO ZABUDOWY NL – MATEN GAT VOOR INBOUW PT – MEDIDAS DO FURO PARA EMBUTIR DA – MÅL TIL ÅBNING FOR INDBYGNING SV – MÅTT HÅL FÖR INBYGGNAD FI – AUKON MITAT UPOTUSTA VARTEN NO- HULLMÅL FOR INNFELLING
2

IT – misure per l’installazione (1), foratura pensile (2), inserimento cappa (3). Fissaggio al pensile (4).
EN – measurements for installation (1), wall unit holes (2), hood installation (3). Fitting to the wall unit (4).
DE – Abmessungen für die Installation (1), Bohren des Hängeschranks (2), Einfügen der Abzugshaube (3). Befestigung am Hängekasten (4).
FR – mesures pour l’installation (1), perçage du meuble (2), mise en place de la hotte (3). Fixation au meuble (4).

ES – medidas para la instalación (1), orificio armario de pared (2), introducción campana (3). Fijación en el armario de pared (4).
RU – (1), (2), (3). K (4).
PL – wymiary instalacji (1), nawiercenie szafki wiszcej (2), wsunicie okapu (3). Mocowanie do szafki wiszcej (4).
NL – maten voor de installatie (1), boring keukenkastje (2), plaatsing kap (3). Bevestiging aan het keukenkastje (4).

PT – medidas para a instalação (1), furação do elemento suspenso (2), inserção da coifa (3). Fixação ao elemento suspenso (4).
DA – Installationsmål (1), hul i skab (2), Isætning af emhætten (3). Fastgørelse til skab (4).
SV – Mått för installationen (1), hål i skåp (2), insättning av kåpa (3). Fastsättning i skåpet (4).
FI – asennusmitat (1), hyllyn aukon teko (2), liesituulettimen paikalleen asetus (3). Kiinnitys hyllyyn (4).
NO – installasjonsmål (1), boring i veggskap (2), innsetting av ventilatorhette (3). Festing til veggskap (4).

1

2

Australia and New Zeland

Min.

Min.

520 mm 600 mm

Min.

Min.

620 mm 650 mm

3
1

4
NO!

(x4) 1

(x4)

OK!

2
Max 28 mm Min 10 mm

(x4)
2
SOLO PER MANUTENZIONE ONLY FOR MAINTENANCE 3

IT – Montaggio tubo d’aspirazione (5), collegamento elettrico (6), montaggio filtri metallici (7). EN – Assembling the suction pipe (5), electrical connection (6), assembling the metal filters (7). DE – Montage der Ansaugleitung (5), elektrischer Anschluss (6), Montage der Metallfilter (7). FR – Montage du tuyau d’aspiration (5), branchement électrique (6), montage des filtres métalliques (7). ES – Montaje tubo de aspiración (5), conexión eléctrica (6), montaje de los filtros metálicos (7). RU – (5), (6), (7). PL – Monta przewodu zasysajcego (5), podlczenie elektryczne (6), monta metalowych filtrów (7). NL – Montage afzuigbuis (5), elektrische verbinding (6), montage metalen filters (7). PT – Montagem da tubo de aspiração (5), ligação elétrica (6), montagem dos filtros metálicos (7). DA – Montage af rør til udsug (5), elektrisk tilslutning (6), montage af metalfiltre (7). SV – Montering och utsugningsrör (5), elektrisk anslutning (6), montering av metallfilter (7). FI – Kehyksen imuputki (5), sähköliitäntä (6), metallisuodattimien asennus (7). NO – Montering av innsugingsrør (5), elektrisk tilkobling (6), montering av metallfiltre (7).

5

6

ø 15

150mm

7
1

2

3

4

IT – Procedura di disinstallazione: svitare viti di tenuta (8), sbloccare gruppo incasso (9). EN – How to uninstall: unscrew fixing screws (8), release built-in unit (9). DE – Demontage-Methode: dichtungsschrauben lösen (8), Einbaugruppe freigeben(9). FR – Procédure de désinstallation: dévisser les vis de fixation (8), extraire le groupe à encastrement (9). ES – Procedimiento de desmontaje: destornille los tornillos de fijación (8), desbloquee el grupo de empotrado (9). RU – : o (8), (9). PL – Procedura dezinstalacji: odkrci ruby przytrzymujce (8), odblokowa zespól do zabudowy (9). NL – Demontageprocedure: schroef de afdichtingsschroeven (8) los, deblokkeer de inbouwgroep (9). PT – Procedimento de desinstalação: desaparafusar os parafusos de vedação(8) e desbloquear o grupo de embutir (9). DA – Procedure for nedtagning: skru skruerne, der holder emhætten fast, løse (8), frigør enheden til indbygning (9). SV – Procedur för avinstallation: skruva loss tätningsskruvarna (8) och frigör den inbyggda enheten (9). FI – Asennuksen purkaminen: avaa kiinnitysruuvit (8), irrota upotettu yksikkö (9). NO – Prosedyre for avinstallering: skru av holdeskruene (8), frigjør innfellingsenheten (9).

8
1

2 (x4)

9
IT – Staffa di sicurezza (Tirare!) EN – Safety bracket (Pull!) DE – Sicherungsbügel (Daran ziehen!) FR – Patte de sécurité (Tirer !) ES – Abrazadera de seguridad (¡Tire!) RU – (!) PL – Obejma zabezpieczajca (Pocign!) NL – Veiligheidsbeugel (Trekken!) PT – Suporte de segurança (Puxar!) DA – Sikkerhedsstænger (Træk!) SV – Säkerhetsfäste (Dra!) FI – Turvavipu (Vedä!) NO – Sikkerhetsbrakett (Trekk!)
2
1
5

PULIZIA E MANUTENZIONE MAINTENANCE REINIGUNG UND WARTUNG NETTOYAGE ET ENTRETIEN LIMPIEZA Y MANTENIMIENTO CZYSZCZENIE I KONSERWACJA
1

REINIGING EN ONDERHOUD LIMPEZA E MANUTENÇÃO RENGØRING OG VEDLIGEHOLDELSE STÄDNING OCH UNDERHÅLL PUHDISTUS JA HUOLTO RENGJØRING OG VEDLIKEHOLD
2

3

4

6

ITALIANO

ISTRUZIONI DI SICUREZZA E AVVERTENZE
Il lavoro d’installazione deve essere eseguito da installatori competenti e qualificati, secondo quanto indicato nel presente libretto e rispettando le norme in vigore. Se il cavo di alimentazione o altri componenti sono danneggiati, la cappa NON deve essere utilizzata: staccare la cappa dall’alimentazione elettrica e contattare il Rivenditore o un Centro Assistenza Tecnica autorizzato per la riparazione. Non modificare la struttura elettrica, meccanica e funzionale dell’apparecchiatura. Non tentare di effettuare da soli riparazioni o sostituzioni: gli interventi effettuati da persone non competenti e qualificate possono provocare danni, anche molto gravi, a cose e/o persone non coperti da garanzia del Costruttore.

posta all’interno della cappa. La presa usata per il collegamento elettrico deve essere facilmente raggiungibile con l’apparecchiatura installata: in caso contrario, prevedere un interruttore generale per disconnettere la cappa al bisogno. Ogni eventuale modifica all’impianto elettrico dovrà essere eseguita solo da un elettricista qualificato. In caso di malfunzionamenti dell’apparecchio, non tentare di risolvere da soli il problema, ma contattare il Rivenditore o un Centro di Assistenza autorizzato per la riparazione.
Durante l’installazione della cappa, disinserire l’apparecchio togliendo la spina o agendo sull’interruttore generale.
SICUREZZA SCARICO FUMI

AVVERTENZE PER L’INSTALLATORE SICUREZZA TECNICA

Non collegare l’apparecchio a condotti di scarico dei fumi prodotti dalla combustione (ad es. caldaie, caminetti, ecc…)

Prima di installare la cappa controllare l’integrità e funzionalità di ogni sua parte: se si notano anomalie non procedere nell’installazione e contattare il Rivenditore. Nel caso sia stato riscontrato un difetto estetico la cappa NON deve essere installata; riporla nel suo imballo originale e contattare il Rivenditore. Una volta installata non sarà accettato alcun reclamo per difetti estetici. Durante l’installazione utilizzare sempre mezzi di protezione personale (es.: scarpe antiinfortunistiche) ed adottare comportamenti prudenti e corretti. Il kit di fissaggio (viti e tasselli) fornito con la cappa è utilizzabile unicamente su pareti in muratura: in caso di installazione su pareti di materiale diverso, valutare altri sistemi di fissaggio tenendo conto della resistenza del muro e del peso della cappa (indicato a pag. 2). Tenere presente che l’installazione con sistemi di fissaggio diversi da quelli forniti o non conformi può comportare rischi di natura elettrica e di tenuta meccanica. Non installare la cappa in ambienti esterni e non esporla ad agenti atmosferici (pioggia, vento, ecc…). SICUREZZA ELETTRICA L’impianto elettrico al quale viene collegata la cappa deve essere a norma e munito di collegamento a terra secondo le norme di sicurezza del Paese di utilizzo; deve essere inoltre conforme alle normative Europee sull’antidisturbo radio. Prima di installare la cappa verificare che la tensione di rete corrisponda a quella riportata dalla targhetta

Prima dell’installazione della cappa assicurarsi che siano rispettate tutte le normative vigenti sullo scarico dell’aria all’esterno del locale. Deviazione per Australia e Nuova Zelanda: Le cappe aspiranti e altri impianti di aspirazione di fumi da cucina possono influire negativamente sul funzionamento in sicurezza degli elettrodomestici che bruciano gas o altri combustibili (anche se presenti in altre stanze) a causa del ritorno dei gas di combustione, che possono potenzialmente causare avvelenamento da monossido di carbonio. Dopo l’installazione di una cappa da cucina o di un altro impianto di aspirazione di fumi da cucina, il funzionamento degli elettrodomestici a gas combusti deve essere testato da una persona competente per garantire che non si verifichi un ritorno dei gas di combustione. (AS/NZS 60335.2.31:2013/A4:2020).
AVVERTENZE PER L’UTILIZZATORE Queste avvertenze sono state redatte per la vostra sicurezza e per quella degli altri, Vi preghiamo, dunque, di leggere attenta-
mente questo libretto in tutte le sue parti prima di utilizzare l’apparecchio o di effettuare operazioni di pulizia sullo stesso. Il Costruttore declina ogni responsabilità per eventuali danni che possano, direttamente o indirettamente, essere causati a persone, cose ed animali domestici conseguenti alla mancata osservanza delle avvertenze di sicurezza indicate in questo libretto.

7

È molto importante che questo libretto istruzioni sia conservato insieme all’apparecchiatura per qualsiasi futura consultazione. Se l’apparecchio dovesse essere venduto o trasferito ad un’altra persona, assicurarsi che anche il libretto venga fornito, in modo che il nuovo utente possa essere messo al corrente del funzionamento della cappa e delle avvertenze relative. Dopo l’installazione delle cappe in acciaio inox è necessario eseguire la pulizia della stessa per rimuovere i residui di collante del protettivo e le eventuali macchie di grasso e oli, che, se non rimosse, possono causare il deterioramento irreversibile della superficie della cappa. Per questa operazione il costruttore raccomanda l’utilizzo delle salviette in dotazione, disponibili anche in acquisto Esigere parti di ricambio originali. DESTINAZIONE D’USO L’apparecchio è destinato solo ed esclusivamente per l’aspirazione di fumi generati dalla cottura di alimenti in ambito domestico, non professionale: qualsiasi utilizzo diverso da questo è improprio, può provocare danni a persone, cose ed animali domestici e solleva il Costruttore da qualsiasi responsabilità. L’apparecchio può essere utilizzato da bambini di età non inferiore a 8 anni e da persone con ridotte capacità fisiche, sensoriali o mentali, o prive di esperienza o della necessaria conoscenza, purché sotto sorveglianza oppure dopo che le stesse abbiano ricevuto istruzioni relative all’uso sicuro dell’apparecchio e alla comprensione dei pericoli ad esso inerenti. I bambini non devono giocare con l’apparecchio. La pulizia e la manutenzione a cura dell’utilizzatore non deve essere effettuata da bambini senza sorveglianza. AVVERTENZE PER L’UTILIZZO E LA PULIZIA
Prima di procedere a qualsiasi operazione di pulizia o di manutenzione, disinserire l’apparecchio togliendo la spina o agendo sull’interruttore generale. Non utilizzare la cappa con le mani bagnate o piedi scalzi. Quando l’apparecchio non viene usato, controllare sempre che tutte le parti elettriche, (luci, aspiratore), siano spente. Il peso massimo complessivo di eventuali oggetti posizionati o appesi (ove previsto) sulla cappa non deve superare 1,5 Kg. Controllare le friggitrici durante l’uso: I’olio surriscaldato potrebbe infiammarsi. Non accendere fiamme libere sotto la cappa. Non preparare cibi alla fiamma sotto la cappa. Non utilizzare mai la cappa senza i filtri metallici anti-

grasso; grasso e sporco in questo caso si depositerebbero nell’apparecchio compromettendone il funzionamento. Parti accessibili della cappa possono essere calde se utilizzate insieme con apparecchi di cottura. Non effettuare operazioni di pulizia quando parti della cappa sono ancora calde. Se la pulizia non è condotta secondo le modalità e i prodotti indicati nel presente libretto è possibile un rischio di incendio. Disinserire l’interruttore generale quando l’apparecchio non viene utilizzato per periodi prolungati di tempo.
In caso di utilizzo contemporaneo di altre utenze (caldaie, stufe, caminetti, ecc.) alimentate a gas o con altri combustibili, provvedere ad una adeguata ventilazione del locale in cui avviene l’aspirazione dei fumi, secondo le norme vigenti.
INSTALLAZIONE
parte riservata solo a personale qualificato
Prima di effettuare l’installazione della cappa, leggere attentamente il cap. “ISTRUZIONI DI SICUREZZA E AVVERTENZE”.
CARATTERISTICHE TECNICHE
I dati tecnici dell’apparecchio sono riportati su etichette posizionate all’interno della cappa.
POSIZIONAMENTO
La distanza minima fra la parte più alta dell’apparecchiatura per la cottura e la parte più bassa della cappa da cucina viene indicata nelle istruzioni di montaggio. In generale, quando la cappa da cucina è posta su un piano cottura a gas, questa distanza deve essere almeno 65 cm (25,6″). Tuttavia sulla base della norma EN60335-2-31, la distanza minima tra piano cottura e parte inferiore della cappa può essere ridotta alla quota riportata nelle istruzioni di montaggio. Se le istruzioni del piano di cottura a gas specificano una distanza maggiore, bisogna tenerne conto. Non installare la cappa in ambienti esterni e non esporla ad agenti atmosferici (pioggia, vento, ecc…).
COLLEGAMENTO ELETTRICO
(parte riservata solo a personale qualificato)
Prima di effettuare qualsiasi operazione sulla cappa scollegare l’apparecchio dalla rete elettrica. Assicurarsi che non vengano scollegati o tagliati fili elettrici all’interno della cappa: in caso contrario contattare il Centro Assistenza più vicino. Per l’allacciamento elettrico rivolgersi a personale qualificato. Il collegamento deve essere eseguito in conformità con le disposizioni di legge in vigore. Prima di collegare la cappa alla rete elettrica, controllare che: · la tensione di rete corrisponda a quella riportata sui dati di targa posti all’interno della cappa; · l’impianto elettrico sia a norma e possa sopportare il carico (vedi caratteristiche tecniche posizionate all’interno della cappa); · la spina e il cavo, di alimentazione, non devono entrare in contatto con temperature superiori a 70 °C; · l’impianto di alimentazione sia munito di efficace e corretto collegamento di terra secondo le norme vigenti; · la presa usata per il collegamento sia facilmente raggiungibile una volta installata la cappa.

8

ITALIANO

In caso di : · apparecchi dotati di cavo senza spina: la spina da utilizzare deve essere di tipo
“normalizzato”. Il fili devono essere collegati come segue: giallo-verde per la messa a terra, blu per il neutro e il filo marrone per la fase. La spina deve essere collegata ad un’adeguata presa di sicurezza. · apparecchio fisso non provvisto di cavo di alimentazione e di spina, o di altro dispositivo che assicuri la disconnessione dalla rete, con una distanza di apertura dei contatti che consenta la disconnessione completa nelle condizioni della categoria di sovratensione III. Tali dispositivi di disconnessione devono essere previsti nella rete di alimentazione conformemente alle regole di installazione.
Il cavo di terra giallo/verde non deve essere interrotto dall’interruttore. Il Costruttore declina ogni responsabilità nel caso le norme di sicurezza non vengano rispettate.
SCARICO FUMI
CAPPA AD EVACUAZIONE ESTERNA (ASPIRANTE)
In questa versione, fumi e vapori vengono convogliati verso l’esterno attraverso il tubo di scarico. A tal fine, il raccordo d’uscita della cappa, deve essere collegato tramite un tubo, ad un’uscita esterna.

FUNZIONAMENTO
QUANDO ACCENDERE LA CAPPA? Accendere la cappa almeno un minuto prima di iniziare a cucinare per convogliare fumi e vapori verso la superficie di aspirazione. Al termine della cottura lasciare in funzione la cappa fino a completa aspirazione di tutti i vapori e odori: con la funzione Timer, è possibile impostare l’autospegnimento della cappa dopo 15 minuti di funzionamento.
QUALE VELOCITÀ SCEGLIERE? I velocità: mantiene l’aria pulita con bassi consumi di energia elettrica. II velocità: condizioni normali di utilizzo. III velocità: presenza di forti odori e vapori. IV velocità: rapidi smaltimenti di odori e vapori.
Nell’ottica della riduzione dell’impatto ambientale, si suggerisce di impostare sempre la velocità minima adeguata al livello di aspirazione richiesto.
QUANDO LAVARE O CAMBIARE I FILTRI? I filtri metallici devono essere lavati ogni 30 ore di utilizzo. Per ulteriori dettagli vedere cap “MANUTENZIONE”.
PULSANTIERA ELETTRONICA

Il tubo d’uscita deve avere: · un diametro non inferiore a quello di raccordo della cappa. · una leggera inclinazione verso il basso (caduta) nei tratti orizzontali per evitare
che la condensa refluisca nel motore. · il numero minimo indispensabile di curve.
· la lunghezza minima indispensabile per evitare vibrazioni e di ridurre la capacità aspirante della cappa. E’ necessario isolare la tubazione se passa attraverso ambienti freddi. Per impedire ritorni d’aria dall’esterno, una valvola di non ritorno è presente in presenza di motori con 800m3/h o superiori.
Deviazione per la Germania: quando la cappa da cucina e apparecchi alimentati con energia diversa da quella elettrica sono in funzione simultaneamente, la pressione negativa nel locale non deve superare i 4 Pa (4 x 10-5 bar).
ISTRUZIONI DI MONTAGGIO
parte riservata solo a personale qualificato
La cappa ha la possibilità di essere installata in varie configurazioni. Le fasi di montaggio generiche valgono per tutte le installazioni; seguire invece dove specificato le fasi corrispondenti all’installazione desiderata.

Motore ON/OFF

Motore OFF Impulso lungo: cambio tonalità di luce da 2700K-5600K

Incremento velocità da 1 a 4 Velocità 4 è attiva solo per alcuni minuti, poi si attiva velocità 3.

Le velocità sono segnalate dai led presenti nei tasti:
Velocità 1

Velocità 2

Riduzione velocità da 4 a 1

Velocità 3
Velocità 4 (led “+” lampeggiante)

Accensione / spegnimento luce Impulso breve: accensione e spegnimento luce Impulso lungo: regolare l’intensità

TIMER (Led rosso lampeggiante) Autospegnimento dopo 15min. La funzione si disattiva (Led rosso spento) se: – Si preme un’altra volta il tasto TIMER ( ). – Si preme il tasto ON/OFF ( ).

Se la pulsantiera è completamente inattiva, prima di contattare il servizio di Assistenza tecnica, togliere temporaneamente (circa 5″) l’alimentazione elettrica all’elettrodomestico, possibilmente agendo sull’interruttore generale, per ripristinare il normale funzionamento. Se questo accorgimento non risultasse efficace, contattare il servizio di
Assistenza tecnica.

9

UTILIZZO DEL RADIOCOMANDO (OPZIONALE)
AVVERTENZE!: Posizionare la cappa lontano da sorgenti di onde elettromagnetiche (es. forni a microonde) che potrebbero interferire con il radiocomando e con l’elettronica della cappa. La distanza massima di funzionamento è di 5 metri che può variare in difetto in presenza di interferenze elettromagnetiche. Radiocomando operante a 433,92MHz. Il radiocomando è composto da due parti: – la ricevente integrata nella cappa; – la trasmittente mostrata qui in figura.
DESCRIZIONE COMANDI TRASMITTENTE
UP Accensione motore e incremento velocità da 1 a 4. La quarta velocità è attiva solo per alcuni minuti.
DOWN Decremento velocità e spegnimento motore
Accensione / spegnimento luce Impulso breve: accensione e spegnimento luce Impulso lungo: regolare l’intensità
TIMER ON: Autospegnimento del motore dopo 15min. La funzione si disattiva automaticamente se si spegne il motore (tasto )
Trasmissione comando attiva

MANUTENZIONE
Prima di procedere a qualsiasi operazione di pulizia o di manutenzione, disinserire l’apparecchio togliendo la spina o agendo sull’interruttore generale. Non si devono utilizzare detergenti contenenti sostanze abrasive, acide o corrosive e panni con superfici ruvide. Una costante manutenzione garantisce un buon funzionamento e rendimento nel tempo. Particolari attenzioni vanno rivolte ai filtri metallici antigrasso: la pulizia frequente dei filtri e dei loro supporti garantisce che non si accumulino grassi infiammabili.
PULIZIA SUPERFICI ESTERNE
Si raccomanda di pulire le superfici esterne della cappa almeno ogni 15 giorni per evitare che le sostanze oleose o grasse possano intaccarle. Per la pulizia della cappa, realizzata in acciaio inox spazzolato, il Costruttore consiglia l’utilizzo delle salviette “Magic Steel” che si possono anche ordinare on-line sul sito www.e-falmec.com. In alternativa e per tutti gli altri tipi di superfici, la pulizia va eseguita usando un panno umido leggermente imbevuto di detersivo neutro liquido o con alcool denaturato. Terminare la pulizia con un accurato risciacquo e asciugatura con panni morbidi.
Non utilizzare troppa acqua in prossimità della pulsantiera e dei dispositivi di illuminazione per evitare che l’umidità raggiunga parti elettroniche.
La pulizia dei pannelli in vetro va eseguita solo con detergenti specifici non corrosivi o abrasivi utilizzando un panno morbido. Il Costruttore declina ogni responsabilità qualora non vengano rispettate tali istruzioni.

PROCEDURA DI ATTIVAZIONE Prima di utilizzare il radiocomando, eseguire la seguente procedura sulla pulsantiera della cappa: · Premere contemporaneamente i tasti LUCE ( ) e TIMER ( ) fino a che tutti
i led iniziano a lampeggiare. · Rilasciare i due tasti e premere ancora il tasto LUCE ( ) fino a quando tutti i
led saranno accesi. · Rilasciare il tasto LUCE ( ): adesso la ricevente è attiva.
La procedura serve anche per la disattivazione della ricevente.

CAMBIO CODICE RADIOCOMANDO In presenza di interferenze elettromagnetiche o più radiocomandi nelle vicinanze, è possibile generare un nuovo codice con la seguente procedura:

1) – GENERARE UN NUOVO CODICE La procedura va eseguita sul radiocomando.

· Premere contemporaneamente i tasti LUCE splay incomincia a lampeggiare.

e TIMER

fino a che il di-

· Premere il tasto DOWN del radiocomando: la memorizzazione del nuovo codice è confermata da 3 brevi lampeggi del display. Il nuovo codice annulla e sostituisce il precedente codice di fabbrica.

2) – ASSOCIAZIONE DEL RADIOCOMANDO ALLA CAPPA TRAMITE PULSANTIERA
premere il tasto TIMER ( ) della pulsantiera della cappa per 2 secondi: il led si accende. premere un tasto qualsiasi del radiocomando entro 5 secondi.

RIPRISTINO CODICE DI FABBRICA la procedura è da effettuarsi in caso di cessione della cappa. · Premere contemporaneamente i tasti UP e DOWN del radiocomando
per più di 5 secondi: l’avvenuto ripristino viene confermato da tre brevi lampeggi del display. · Procedere con l’associazione tra cappa e radiocomando come descritto nel punto 2.

PULIZIA SUPERFICI INTERNE
E’ vietata la pulizia di parti elettriche o parti relative al motore all’interno della cappa, con liquidi o solventi. Per le parti metalliche interne vedi paragrafo precedente.
FILTRI METALLICI ANTIGRASSO
Si consiglia di lavare frequentemente i filtri metallici (almeno ogni mese) lasciandoli in ammollo per circa 1 ora in acqua bollente con detersivo per piatti, evitando di piegarli. Non usare detergenti corrosivi, acidi o alcalini. Risciacquarli con cura ed attendere che siano ben asciutti prima di rimontarli. Il lavaggio in lavastoviglie è permesso. Per l’estrazione e l’inserimento dei filtri metallici antigrasso vedi istruzioni di montaggio.
ILLUMINAZIONE
La cappa è dotata di illuminazione a led ad alta efficienza, basso consumo e durata molto elevata in condizioni di normale utilizzo. In caso di rottura contattare il Rivenditore o un Centro Assistenza Tecnica autorizzato per la riparazione.
VASCHETTA RACCOGLI OLIO
Si consiglia di pulire la vaschetta ogni 15 giorni. Non usare detergenti corrosivi, acidi o alcalini. Per una pulizia più approfondita, togliere la vaschetta raccogli olio (vedi istruzioni) e lavarla con acqua bollente e detersivo per i piatti. Risciacquarla con cura e attendere che sia ben asciutta prima di rimontarla.
Non lavare la vaschetta raccogli olio in lavastoviglie.

10

ITALIANO

SMALTIMENTO A FINE VITA
Il simbolo del cestino barrato riportato sull’apparecchiatura in suo possesso indica che il prodotto è un RAEE, cioè un “Rifiuto derivante dalle Apparecchiature Elettriche ed Elettroniche” e pertanto non deve essere gettato nella spazzatura indifferenziata (cioè insieme ai “rifiuti urbani misti”), ma deve essere gestito separatamente così da essere sottoposto ad apposite operazioni per il suo riutilizzo, oppure a uno specifico trattamento, per rimuovere e smaltire in modo sicuro le eventuali sostanze dannose per l’ambiente ed estrarre le materie prime che possono essere riciclate. Lo smaltimento corretto di questo prodotto contribuirà a salvare preziose risorse ed evitare potenziali effetti negativi per la salute umana e per l’ambiente, che potrebbero essere causati da uno smaltimento inappropriato dei rifiuti. Vi preghiamo di contattare le autorità locali per ulteriori dettagli sul punto di smaltimento designato più vicino. Potrebbero venire applicate delle penali per lo smaltimento scorretto di questi rifiuti in conformità alla legislazione nazionale.
INFORMAZIONI SULLO SMALTIMENTO IN ITALIA In Italia le apparecchiature RAEE devono perciò essere consegnate: – ai Centri di Raccolta (chiamati anche isole ecologiche o piattaforme ecologi-
che) allestiti dai Comuni o dalle Società di igiene urbana (in molte località viene anche effettuato il servizio di ritiro a domicilio delle apparecchiature RAEE ingombranti); – al negozio presso il quale si acquista una nuova apparecchiatura, che è tenuto a ritirarle gratuitamente (ritiro “uno contro uno”); – ad un negozio qualunque*, che è tenuto a ritirarle gratuitamente e senza obbligo di acquisto (ritiro “uno contro zero”). In questo caso: 1) l’apparecchiatura RAEE, per poter essere riconsegnata, deve avere “piccolissime dimensioni” (altezza, profondità e larghezza minori di 25 cm); * 2) il negozio al quale viene riconsegnata l’apparecchiatura RAEE deve avere una superficie di vendita superiore a 400 mq.
INFORMAZIONI SULLO SMALTIMENTO IN NAZIONI DELL’UNIONE EUROPEA La Direttiva comunitaria sulle apparecchiature RAEE è stata recepita in modo diverso da ciascuna nazione, pertanto se si desidera smaltire questa apparecchiatura suggeriamo di contattare le autorità locali o il Rivenditore per chiedere il metodo corretto di smaltimento.
INFORMAZIONI SULLO SMALTIMENTO IN NAZIONI NON APPARTENENTI ALL’UNIONE EUROPEA Il simbolo del cestino barrato è valido solamente nell’Unione Europea: se si desidera smaltire questa apparecchiatura in altri Paesi suggeriamo di contattare le autorità locali o il Rivenditore per chiedere il metodo corretto di smaltimento.
ATTENZIONE!
Il Costruttore si riserva il diritto di apportare modifiche alle apparecchiature in qualsiasi momento e senza preavviso. La stampa, la traduzione e la riproduzione anche parziale del presente manuale s’intendono vincolate dall’autorizzazione del Costruttore. Le informazioni tecniche, le rappresentazioni grafiche e le specifiche presenti in questo manuale sono indicative e non divulgabili. La lingua di stesura del manuale è l’italiano, il Costruttore non si rende responsabile per eventuali errori di trascrizione o traduzione.
11

SAFETY INSTRUCTIONS AND WARNINGS

comply with European standards regarding radio antistatic properties.

Installation operations are to be carried out by skilled and qualified installers in accordance with the instructions in this booklet and in compliance with the regulations in force. DO NOT use the hood if the power supply cable or other components are damaged: disconnect the hood from the electrical power supply and contact the Dealer or an authorised Servicing Dealer for repairs. Do not modify the electrical, mechanical or functional structure of the equipment. Do not personally try to carry out repairs or replacements. Interventions carried out by incompetent and unauthorised persons can cause serious damage to the unit or physical and personal harm, not covered by the Manufacturer’s warranty. WARNINGS FOR THE INSTALLER TECHNICAL SAFETY Before installing the hood, check the integrity and function of each part. Should anomalies be noted, do not proceed with installation and contact the Dealer. Do NOT install the hood if an aesthetic (or cosmetic) defect has been detected. Put it back into its original package and contact the dealer. No claim can be made for aesthetic (or cosmetic) defects once it has been installed. During installation, always use personal protective equipment (e.g.: Safety shoes) and adopt prudent and proper conduct. The installation kit (screws and plugs) supplied with the hood is only to be used on masonry walls: in case of installation on walls of a different material, assess other installation options keeping in mind the type of wall surface and the weight of the hood (indicated on page 2). Keep in mind that installations with different types of fastening systems from those supplied, or which are not compliant, can cause electrical and mechanical seal danger. Do not install the hood outdoors and do not expose it to atmospheric elements (rain, wind, etc.). ELECTRICAL SAFETY The electrical system to which the hood is to be connected must be in accordance with local standards and supplied with earthed connection in compliance with safety regulations in the country of use. It must also

Before installing the hood, check that the electrical mains power supply corresponds with what is reported on the identification plate located inside the hood. The socket used to connect the installed equipment to the electrical power supply must be within reach: otherwise, install a mains switch to disconnect the hood when required. Any changes to the electrical system must be carried out by a qualified electrician. Do not try to solve the problem yourself in the event of equipment malfunction, but contact the Dealer or an authorised Servicing Department for repairs.
When installing the hood, disconnect the equipment by removing the plug or switching off the main switch. FUMES DISCHARGE SAFETY Do no connect the equipment to discharge pipes of fumes produced from combustion (for example boilers, fireplaces, etc.). Before installing the hood, ensure that all standards in force regarding discharge of air out of the room have been complied with. Deviation for Australia and New Zeland: Range hoods and other cooking fume extractors may adversely affect the safe operation of appliances burning gas or other fuels (including those in other rooms) due to back flow of combustion gases. These gases can potentially result in carbon monoxide poisoning. After installation of a range hood or other cooking fume extractor, the operation of flued gas appliances should be tested by a competent person to ensure that back flow of combustion gases does not occur. (AS/NZS 60335.2.31:2013/A4:2020). USER WARNINGS These warnings have been drawn up for your personal safety and those of others. You are therefore kindly asked to read the booklet carefully in its entirety before using the or cleaning the equipment. The Manufacturer declines all responsibility for any damage caused directly, or indirectly, to persons, things and pets as a consequence of failing to comply with the safety warnings indicated in this booklet. It is imperative that this instructions booklet is kept together with the equipment for any future

12

ENGLISH

consultation. If the equipment is sold or transferred to another person, make sure that the booklet is also supplied so that the new user can be made aware of the hood’s operation and relative warnings. After the stainless steel hood has been installed, it will need to be cleaned to remove any residues remaining from the protection adhesive as well as any grease and oil stains which, if not removed, can cause irreversible damage to the hood surface. To properly clean the unit, the manufacturer recommends using the supplied moist wipes, which are also available sold separately. Insist on original spare parts. INTENDED USE The equipment is solely intended to be used to extract fumes generated from cooking food in non-professional domestic kitchens: any other use is improper. Improper use can cause damage to persons, things, pets and exempts the Manufacturer from any liability.

Do not carry out any cleaning operations when parts of the hood are still hot. There can be a risk of fire if cleaning is not carried out according to the instructions and products indicated in this booklet. Disconnect the main switch when the equipment is not used for long periods of time.
If other appliances that use gas or other fuels are being used at the same time (boiler, stove, fireplaces, etc.), make sure the room where the fumes are discharged is well-ventilated, in compliance with the local regulations.
INSTALLATION
only intended for qualified personnel Before installing the hood, carefully read the chapter “SAFETY INSTRUCTIONS AND WARNINGS”.
TECHNICAL FEATURES
The technical specifications are exhibited on the labels located inside the hood.

The equipment can be used by children over the age of 8 and by persons with reduced physical, sensory and mental abilities, or with no experience or knowledge, as long as they do so under supervision or after having received relative instructions regarding safe use of the equipment and understanding of the dangers connected to it. Children are not to play with the equipment. Cleaning and maintenance by the user must not be carried out by children without supervision. USE AND CLEANING WARNINGS
Before cleaning or carrying out maintenance operations, disconnect the equipment by removing the plug or switching off the main switch. Do not use the hood with wet hands or bare feet. Always check that all electrical parts (lights, extractor fan) are off when the equipment is not being used. The maximum overall weight of any objects placed or hung (if applicable) on the hood must not exceed 1.5 Kg. Always supervise the cooking process during the use of deep-fryers: Overheated oil can catch fire. Do not leave open, unattended flames under the hood. Do not prepare food over an open flame under the hood. Never use the hood without the metal anti-grease filters: in this case, grease and dirt will deposit in the equipment and compromise its operation. Accessible parts of the hood can be hot when used at the same time as the cooking appliances.

POSITIONING
The minimum distance between the highest part of the cooking equipment and the lowest part of the hood is indicated in the installation instructions. Generally, when the hood is placed over gas cookers, the distance must be at least 65 cm (25.6”). However, according to standard EN60335-2-31, the minimum distance between the cooker and lower part of the hood can be reduced to the quota reported in the installation instructions. Should the instructions for the gas cooker specify a greater distance, this must be taken into consideration. Do not install the hood outdoors and do not expose it to outdoor environment (rain, wind, etc.).
ELECTRICAL CONNECTION
(only intended for qualified personnel)
Disconnect the equipment from electrical mains power supply before carrying out any operations on the hood. Ensure that the wires inside the hood are not disconnected or cut: in the event of damage, contact your nearest Servicing Department. Refer to qualified personnel for electrical connections. Connection must be carried out in compliance with the provisions of law in force. Before connecting the hood to the electrical mains power supply, check that: · voltage supply corresponds with what is reported on the data plate located inside the hood; · the electrical system is compliant and can withstand the load (see the technical specifications located inside the hood); · the power supply plug and cable do not come into contact with temperatures exceeding 70 °C; · the power supply system is effectively and properly connected to earth in compliance with regulations in force; · the socket used to connect the hood is within reach.
In case of: · devices fitted with cables without a plug: the type of plug to use is a ”stand-
ardised” one. The wires must be connected as follows: yellow-green for earthing, blue for neutral and brown for the phase. The plug must be connected to an adequate safety socket. · fixed equipment not provided with a power supply cable and plug, or any other device that ensures disconnection from the electrical mains, with an opening gap of the contacts that enables total disconnection in overvoltage category III conditions. Said disconnection devices must be provided in the mains power supply in compliance with installation regulations.

13

The yellow/green earth cable must not be cut off by the switch. The Manufacturer declines all responsibility for failure to comply with the safety regulations.

ELECTRONIC PUSHBUTTON PANEL

FUMES DISCHARGE
EXTERNAL EXHAUST HOOD (SUCTION)
In this version the fumes and vapours are discharged outside through the exhaust pipe. To this end, the hood outlet fitting must be connected via a pipe, to an external output.
The outlet pipe must have: · a diameter not less than that of the hood fitting. · a slight slope downwards (drop) in the horizontal sections to prevent conden-
sation from flowing back into the motor. · the minimum required number of bends.
· The minimum required length to avoid vibrations and reduce the suction performance of the hood. You are required to insulate the pipes if it passes through cold environments. In the presence of motors with 800 m3/h or higher, a check valve is present to prevent external air flowing back.
Deviation for Germany: when the kitchen hood is used at the same time as appliances that are powered by energy other than electricity, the negative pressure in the room must not exceed 4 Pa (4 x 10-5 bar).
ASSEMBLY INSTRUCTIONS
only intended for qualified personnel
The hood can be installed in various configurations. The generic assembly steps apply to all installations; for each case, follow the specific steps provided for the required installation.
OPERATION
WHEN TO TURN ON THE HOOD? Switch on the hood at least one minute before starting to cook to direct fumes and vapours towards the suction surface. After cooking, leave the hood operating until complete extraction of all vapours and odours. By means of the Timer function, it is possible to set auto switch-off function which will allow the hood to turn off automatically after 15 minutes of operation.
WHICH SPEED IS TO BE SELECTED? 1st speed: maintains the circulation of clean air with low electricity consumption. 2nd speed: normal conditions of use. 3rd speed: presence of strong odours and vapours. 4th speed: rapid disposal of odours and vapours.
With a view to reducing environmental impact, it is suggested to always set the minimum speed suitable for the required suction level.
WHEN SHOULD THE FILTERS BE WASHED OR REPLACED? The metal filters must be cleaned every 30 hours of operation. For further details see the “MAINTENANCE” chap.

Motor ON/OFF

Motor OFF Long impulse: change light tone from 2700K to 5600K

Increase speed from 1 to 4 Speed 4 is only active for a few minutes, then speed 3 activates.

The speeds are indicated by the LEDs on the keys:
Speed 1

Speed 2

Reduce speed from 4 to 1
(“+” LED flashing)
Light on/off Short impulse: turn light on and off Long impulse: adjust intensity
TIMER (red LED flashing) Auto switch-off after 15 min. The function deactivates (red LED off ) if: – The TIMER key ( ) is pressed again. – The ON/OFF key ( ) is pressed.

Speed 3 Speed 4

If the pushbutton panel is completely inactive, before contacting the Technical assistance service, disconnect power temporarily to the appliance (about 5″), possibly by acting on the main switch, to restore normal operation. If this measure has no effect, contact the Technical assistance service.

USING THE RADIO CONTROL (OPTIONAL)
WARNINGS!: Place the hood away from sources of electromagnetic waves (e.g. microwave ovens), which could interfere with the radio control and with the hood electronics. The maximum operating distance is 5 metres, that may vary according to the presence of electromagnetic interferences. Radio control operated at 433.92MHz. The radio control consists of two parts: – the receiver built into the hood; – the transmitter shown here in the figure.
DESCRIPTION OF TRANSMITTING COMMANDS
UP Motor switch-on and speed increase from 1 to 4. Speed 4 is only active for a few minutes.
DOWN Speed decrease and motor switch-off.
Light on/off Short impulse: turn light on and off Long impulse: adjust intensity
TIMER ON: The motor automatically switches off after 15 min. The function is automatically disabled if the motor is switched off ( key)
Command transmission active

ACTIVATION PROCEDURE Before using the radio control, follow the procedure below on the hood pushbutton panel: · Press LIGHT ( ) and TIMER ( ) simultaneously until all LEDs start flashing. · Release the two keys and press LIGHT ( ) again until all LEDs are lit up. · Release LIGHT ( ): now the receiver is active. This procedure is also used to deactivate the receiver.
14

ENGLISH

RADIO CONTROL CODE CHANGE If there is electromagnetic interference or more than one radio control in the vicinity, a new code can be generated using the following procedure: 1) – CREATE A NEW CODE The procedure is to be carried out on the radio control.
· Press LIGHT and TIMER simultaneously until the display starts flashing. · Press DOWN on the radio control: saving is confirmed by three brief flash-
es of the display. The new code cancels and replaces the previous default code.
2) – ASSOCIATION OF RADIO CONTROL TO THE HOOD VIA PUSHBUTTON PANEL
press TIMER ( ) on the hood pushbutton panel for 2 seconds: the LED lights up. press any key on the radio control within 5 seconds.
RESTORING DEFAULT CODE the procedure is to be carried out if the hood is disposed of, sold or transferred.
· Press UP and DOWN simultaneously on the radio control for more than 5 seconds: reset is confirmed by three brief flashes of the display.
· Proceed with associating the hood and the radio control, as described in point 2.
MAINTENANCE
Before cleaning or carrying out maintenance operations, disconnect the equipment by removing the plug or switching off the main switch. Do not use detergents containing abrasive, acidic or corrosive substances or abrasive cloths. Regular maintenance guarantees proper operation and performance over time. Special attention is to be paid to the metal anti-grease filters: frequent cleaning of the filters and their supports ensures that no flammable grease is accumulated.
CLEANING OF EXTERNAL SURFACES
You are advised to clean the external surfaces of the hood at least once every 15 days to prevent oily substances and grease from sticking to them. To clean the brushed stainless steel hood, the Manufacturer recommends using “Magic Steel” wipes. Alternatively and for all the other types of surfaces, it can be cleaned using a damp cloth, slightly moistened with mild, liquid detergent or denatured alcohol. Finish off cleaning by rinsing well and drying with soft cloths.
Do not use too much water next to the push button control panel and lighting devices in order to prevent humidity from reaching electronic parts.
The glass panels can only be cleaned with specific, non-corrosive or non-abrasive detergents using a soft cloth. The Manufacturer declines all responsibility for failure to comply with these instructions.
CLEANING OF INTERNAL SURFACES
Do not clean electrical parts, or parts related to the motor inside the hood, with liquids or solvents. For the internal metal parts, see the previous paragraph.

It is advisable to clean the tray every 15 days. Do not use corrosive, acid or alkaline detergents. For more thorough cleaning, remove the grease drip tray (see instructions) and wash it with hot water and washing up liquid. Rinse it well and wait for it to be completely dry before reassembling it.
The grease drip tray is not dishwasher safe.
DISPOSAL AFTER END OF USEFUL LIFE
The crossed-out trash or refuse bin symbol on the appliance means that the product is WEEE, i.e. “Waste electrical and electronic equipment”, accordingly it must not be disposed of with regular unsorted waste (i.e. with ”mixed household waste”), but it must be disposed of separately so that it can undergo specific processing for its re-use, or a specific treatment, to remove and safely dispose of any substances that may be harmful to the environment and remove the raw materials that can be recycled. Proper disposal of these products contributes to saving valuable resources and avoid potential negative effects on personal health and the environment, which may be caused by inappropriate disposal of waste. You are kindly asked to contact your local authorities for further information regarding the designated waste collection points nearest to you. Penalties for improper disposal of such waste can be applied in compliance with national regulations.
INFORMATION ON DISPOSAL IN EUROPEAN UNION COUNTRIES The EU WEEE Directive was implemented differently in each country, accordingly, if you wish to dispose of this appliance we suggest contacting your local authorities or dealer to find out what the correct method of disposal is.
INFORMATION ON DISPOSAL IN NON-EUROPEAN UNION COUNTRIES The crossed-out trash or refuse bin symbol is only valid in the European Union: if you wish to dispose of this appliance in other countries, we suggest contacting your local authorities or dealer to find out what the correct method of disposal is.
WARNING!
The Manufacturer reserves the right to make changes to the equipment at any time and without prior notice. Printing, translation and reproduction, even partial, of this manual are bound by the Manufacturer’s authorisation. Technical information, graphic representations and specifications in this manual are for information purposes and cannot be divulged. This manual is written in Italian. The Manufacturer is not responsible for any transcription or translation errors.

METAL ANTI-GREASE FILTERS
It is advised to frequently wash the metal filters (at least once a month) leaving them to soak in boiling water and cleaning solution for 1 hour, taking care not to bend them. Do not use corrosive, acid or alkaline detergents. Rinse them well and wait for them to be completely dry before reassembling them. They are dishwasher safe. To extract and insert the metal anti-grease filters see the assembly instructions.
LIGHTING
The range hood is equipped with high efficiency, low consumption LED lighting with extremely long duration under normal use conditions. In case of failure, contact the Dealer or an authorised Servicing Department for repairs.
GREASE DRIP TRAY
15

ANWEISUNGEN FÜR DIE SICHERHEIT UND WARNHINWEISE
Die Installation muss von kompetenten und qualifizierten Installateuren unter Befolgung der Angaben der vorliegenden Gebrauchsanweisung sowie unter Einhaltung der gültigen Sicherheitsvorschriften vorgenommen werden. Wenn das Versorgungskabel oder andere Komponenten beschädigt sind, darf die Abzugshaube NICHT verwendet werden: Die Abzugshaube von der Stromversorgung trennen und den Händler oder den autorisierten Kundendienst für die Reparatur kontaktieren. Die elektrische, mechanische und funktionelle Struktur des Geräts darf nicht verändert werden. Niemals versuchen, Reparaturen oder Austauschtätigkeiten selbst durchzuführen. Werden diese Arbeiten von Personen durchgeführt, die nicht dazu befähigt und qualifiziert sind, so kann dies zu schweren Personen- und Sachschäden führen, die von der Herstellergarantie nicht gedeckt sind. HINWEISE FÜR DEN INSTALLATEUR TECHNISCHE SICHERHEIT Vor der Installation der Abzugshaube muss sichergestellt werden, dass sämtliche Komponenten unbeschädigt und funktionstüchtig sind. Sollten Schäden festgestellt werden, nicht mit der Installation fortfahren und umgehend den Händler kontaktieren. Sollte ein ästhetischer Mangel festgestellt werden, so darf die Abzugshaube NICHT installiert werden. Die Abzugshaube wieder verpacken und umgehend den Händler kontaktieren. Sobald die Abzugshaube installiert ist, werden keine Beanstandungen aufgrund ästhetischer Mängel mehr akzeptiert. Während der Installation ist immer eine geeignete persönliche Schutzausrüstung zu tragen (z.B. Sicherheitsschuhwerk) und aufmerksam und korrekt vorzugehen. Das mit der Abzugshaube gelieferte Befestigungsset (Schrauben und Dübel) darf ausschließlich für gemauerte Wände verwendet werden. Sollte es notwendig sein, die Abzugshaube an einer Wand aus anderem Material zu installieren, müssen alternative Befestigungssysteme in Betracht gezogen werden, wobei die Festigkeit der Wand und das Gewicht der Abzugshaube (siehe S. 2) zu berücksichtigen sind. Dabei ist zu beachten, dass die Installation mit Befestigungssystemen, die von den mitgelieferten abweichen, elektrische Gefahren und Risiken in Bezug auf die mechanische Abdichtung mit sich bringen kann. Die Abzugshaube darf nicht in Außenbereichen installiert und keinen Witterungseinflüssen (Regen, Wind, etc.) ausgesetzt werden.

ELEKTRISCHE SICHERHEIT Die elektrische Anlage für den Anschluss der Abzugshaube muss den geltenden Normen entsprechen und mit einem Erdungs-
system ausgestattet sein, das den Sicherheitsvorschriften des Installationslandes entspricht. Sie muss außerdem der EU-Gesetzgebung bezüglich der Funkentstörung entsprechen. Vor der Installation der Abzugshaube muss überprüft werden, dass die Netzspannung derjenigen auf dem Typenschild im Inneren der Abzugshaube entspricht. Die für den elektrischen Anschluss verwendete Steckdose muss gut erreichbar sein, wenn das Gerät installiert ist. Andernfalls muss ein Hauptschalter vorgesehen werden, um die Abzugshaube bei Bedarf zu trennen. Sämtliche eventuellen Änderungen an der Elektroanlage müssen von einem qualifizierten Elektriker vorgenommen werden. Im Fall einer Störung des Geräts nicht versuchen, das Problem eigenständig zu lösen, sondern den Händler oder den autorisierten Kundendienst für die Reparatur kontaktieren.
Während der Installation der Abzugshaube muss das Gerät durch Ziehen des Netzsteckers oder Betätigung des Hauptschalters abgeschaltet werden. SICHERHEIT RAUCHABZUG Das Gerät nicht an Rohre für den Abzug von Rauch anschließen, der durch Verbrennung entsteht (z.B. Heizkessel, Kamine, etc.). Vor der Installation der Abzugshaube muss sichergestellt werden, dass alle gültigen gesetzlichen Vorschriften in Bezug auf die Luftableitung aus dem Raum eingehalten werden. Abweichende Bestimmungen für Australien und Neuseeland: Dunstabzugshauben und andere Abzugshauben für Kochdämpfe könnten den sicheren Betrieb von Geräten, die Gas oder andere Brennstoffe verbrennen (einschließlich solcher in anderen Räumen), aufgrund eines Rückflusses von Verbrennungsgasen beeinträchtigen. Diese Gase können möglicherweise zu einer Kohlenmonoxidvergiftung führen. Nach der Installation einer Dunstabzugshaube oder anderen Abzugshauben für Kochdämpfe sollte die Funktion der Gasfeuergeräte von einer kompetenten Person geprüft werden, um sicherzustellen, dass kein Rückfluss von Verbrennungsgasen auftritt. (AS/NZS 60335.2.31:2013/A4:2020).

16

HINWEISE FÜR DEN BENUTZER

HINWEISE FÜR VERWENDUNG UND REINIGUNG

DEUTSCH

Diese Hinweise wurden für Ihre Sicherheit und die Sicherheit anderer Personen erstellt, und wir bitten Sie deshalb, die vorliegende Gebrauchsanweisung vor der Installation, der Verwendung oder der Reinigung des Geräts vollständig zu lesen. Der Hersteller lehnt jegliche Haftung für etwaige direkte oder indirekte Schäden von Personen, Gegenständen oder Haustieren ab, die durch eine Nichtbeachtung der in der vorliegenden Gebrauchsanweisung angeführten Sicherheitshinweise verursacht werden. Es ist sehr wichtig, dass diese Gebrauchsanweisung zusammen mit dem Gerät aufbewahrt wird, damit künftig darin nachgelesen werden kann. Falls das Gerät verkauft oder an eine andere Person übergeben wird, muss sichergestellt werden, dass auch die Gebrauchsanweisung übergeben wird, damit der neue Besitzer informiert werden kann, wie die Abzugshaube funktioniert und welche diesbezüglichen Warnhinweise zu beachten sind. Nach der Installation der Edelstahlhaube muss als Erstes deren Reinigung erfolgen, um die Rückstände der Schutzklebefolie und eventuelle Flecken von Öl oder Fett zu entfernen, die die Oberfläche der Abzugshaube unwiderruflich beschädigen können, falls sie nicht entfernt werden. Für diesen Vorgang empfiehlt der Hersteller, die mitgelieferten Reinigungstücher zu benutzen, die auch gekauft werden können. Immer die Verwendung von originalen Ersatzteilen fordern. VERWENDUNGSBESTIMMUNG Das Gerät ist ausschließlich für die Absaugung von Rauch bestimmt, der während der Zubereitung von Speisen in Haushaltsküchen, nicht in gewerblichen Küchen, erzeugt wird. Jede andere Verwendung gilt als unsachgemäß, kann Schäden an Personen, Gegenständen und Haustieren verursachen und enthebt den Hersteller von jeglicher Verantwortung.

Vor jedem Reinigungs- oder Wartungseingriff das Gerät durch Ziehen des Netzsteckers oder Betätigung des Hauptschalters vom Stromnetz trennen. Die Abzugshaube nicht mit nassen Händen oder nackten Füßen verwenden. Immer kontrollieren, dass alle elektrischen Teile (Beleuchtung, Absauganlage) ausgeschaltet sind, wenn das Gerät nicht verwendet wird. Das maximale Gesamtgewicht eventuell auf der Abzugshaube abgestellter oder an ihr aufgehängter Gegenstände (falls vorgesehen) darf 1,5 kg nicht überschreiten. Fritteusen müssen während des Betriebs überwacht werden: Das erhitzte Öl könnte Feuer fangen. Unter der Haube keine offenen Flammen verwenden. Unterhalb der Abzugshaube keine Garvorgänge mit “offenen” Flammen ausführen. Die Abzugshaube nie ohne Metallfettfilter verwenden. In diesem Fall würden sich Fett und Schmutz auf dem Gerät absetzen und seine Funktionstüchtigkeit beeinträchtigen. Die erreichbaren Teile der Abzugshaube können heiß sein, wenn sie zusammen mit Kochgeräten verwendet werden. Mit der Reinigung so lange warten, bis alle Teile der Abzugshaube abgekühlt sind. Sollte die Reinigung nicht gemäß den Vorschriften und mit den Produkten ausgeführt werden, die im vorliegenden Handbuch angegeben sind, so besteht Brandgefahr. Wenn das Gerät über einen längeren Zeitraum nicht verwendet wird, muss der Hauptschalter abgeschaltet werden. Bei gleichzeitiger Verwendung anderer mit Gas oder anderen Brennstoffen gespeister Verbraucher (Heizkessel, Öfen, Kamine, etc.) für eine angemessene, vorschriftsmäßige Lüftung des Raumes sorgen, in dem die Dunstabsaugung erfolgt.

Dieses Gerät kann von Kindern ab 8 Jahren sowie von Personen mit reduzierten physischen, sensorischen oder mentalen Fähigkeiten oder Mangel an Erfahrung und/oder Wissen benutzt werden, wenn sie beaufsichtigt oder bezüglich des sicheren Gebrauchs des Gerätes unterwiesen wurden und die damit zusammenhängenden Gefahren verstanden haben. Kinder dürfen nicht mit dem Gerät spielen. Kinder dürfen die vom Benutzer auszuführende Reinigung und Wartung nicht unbeaufsichtigt durchführen.

INSTALLATION
Dieser Abschnitt ist ausschließlich qualifiziertem Personal vorbehalten
Vor der Installation der Abzugshaube muss das Kapitel “ANWEISUNGEN FÜR DIE SICHERHEIT UND WARNHINWEISE” aufmerksam gelesen werden.
TECHNISCHE MERKMALE
Die technischen Daten des Geräts sind auf den Schildern im Inneren der Abzugshaube angegeben.
POSITIONIERUNG
Der Mindestabstand zwischen dem höchsten Teil des Kochgeräts und dem untersten Teil der Abzugshaube ist in der Montageanleitung angegeben. Wenn die Abzugshaube über einer Gaskochfläche positioniert ist, muss dieser Abstand gewöhnlich mindestens 65 cm (25,6″) betragen. Dennoch kann gemäß der Norm EN60335-2-31 der Mindestabstand zwischen der Kochebene und

17

dem unteren Teil der Abzugshaube auf den in der Montageanleitung angegebenen Wert vermindert werden. Wenn die Anleitung der Gaskochebene einen größeren Abstand vorschreibt, muss dies eingehalten werden. Die Abzugshaube darf nicht in Außenbereichen installiert und keinen Witterungseinflüssen (Regen, Wind, etc.) ausgesetzt werden.
ELEKTRISCHER ANSCHLUSS
(Dieser Abschnitt ist ausschließlich qualifiziertem Personal vorbehalten)
Vor sämtlichen Eingriffen an der Abzugshaube muss das Gerät vom Stromnetz getrennt werden. Sicherstellen, dass die Elektrokabel in der Abzugshaube nicht abgeschnitten oder getrennt werden: Andernfalls muss das nächstgelegene Kundendienstzentrum kontaktiert werden. Für die elektrischen Anschlüsse qualifiziertes Personal beauftragen. Der Anschluss muss in Übereinstimmung mit der geltenden Gesetzgebung ausgeführt werden. Bevor das Gerät ans Stromnetz angeschlossen wird, muss geprüft werden, dass: · die Netzspannung jener der Daten auf dem Typenschild in der Abzugshaube entspricht; · die elektrische Anlage den gesetzlichen Vorschriften entspricht und für die Belastung des Geräts geeignet ist (siehe Kenndaten in der Abzugshaube); · der Stecker und das Kabel nicht mit heißen Komponenten mit Temperaturen über 70 °C in Berührung kommen; · die Versorgungsanlage mit einer wirksamen und gemäß den geltenden Normen ausgeführten Erdung verbunden ist; · die für den Anschluss verwendete Steckdose gut erreichbar ist, wenn die Abzugshaube installiert ist.
Bei: · mit einem Kabel ohne Stecker ausgestatteten Geräten: muss der zu verwen-
dende Stecker ein genormter Stecker sein. Die Kabel müssen wie folgt angeschlossen werden: Das gelb-grüne Kabel für die Erdung, das blaue Kabel für den Nullleiter und das braune für die Phase. Der Stecker muss an einer geeigneten Sicherheitssteckdose angeschlossen werden. · einem fest montierten Gerät, das über kein Versorgungskabel oder eine andere Vorrichtung zur Trennung vom Stromnetz mit einer derartigen Öffnungsdistanz der Kontakte verfügt, dass die vollständige Trennung zu den Bedingungen der Überspannungskategorie III erfolgt. Diese Trennvorrichtungen müssen gemäß den Installationsnormen am Versorgungsnetz installiert werden.
Der grün/gelbe Erdungsdraht darf nicht vom Schalter unterbrochen werden. Der Hersteller lehnt jede Haftung ab, falls die Sicherheitsnormen nicht eingehalten werden.
RAUCHABZUG
ABZUGSHAUBE IN VERSION AUSSENABLUFT (ABLUFTVERSION)
Bei dieser Ausführung werden die Dämpfe über ein Abzugsrohr nach außen abgeleitet. Deshalb muss der Anschluss der Haube für den Abzug mit einem Rohr an einem externen Abzug angeschlossen werden.
Das Abzugsrohr muss: · einen größeren Durchmesser als der Abzugshaubenanschluss haben. · in den horizontalen Abschnitten eine leichte Neigung nach unten aufweisen
(Gefälle), um zu verhindern, dass das entstehende Kondenswasser in die Abzugshaube zurückfließt. · so wenig Kurven wie möglich aufweisen. · So kurz wie möglich sein, um Vibrationen zu vermeiden, und um zu verhindern, dass die Abzugsleistung der Haube reduziert wird. Wenn die Rohrleitung durch kalte Räume verläuft, muss sie isoliert werden. Um ein Rückströmen der Luft von Außen zu vermeiden, verfügen Abzugshauben mit Motoren zu 800m3/h oder mehr, über ein Rückschlagventil.
Abweichungen für Deutschland: Wenn die Herdabzugshaube gleichzeitig mit Geräten betrieben wird, die mit einer anderen Energie als elektrischem Strom betrieben werden, darf der negative Druck im Raum 4 Pa nicht überschreiten (4 x 10-5 bar).

MONTAGEANLEITUNG
Dieser Abschnitt ist ausschließlich qualifiziertem Personal vorbehalten Die Abzugshaube kann in verschiedenen Konfigurationen installiert werden: Die allgemeinen Montagephasen gelten für alle Installationen; befolgen Sie dagegen die entsprechenden Phasen der gewünschten
Installation, wo dies extra angegeben wird.
BETRIEB
WANN MUSS DIE ABZUGSHAUBE EINGESCHALTET WERDEN? Die Abzugshaube mindestens eine Minute vor Beginn des Kochvorgangs einschalten. Dadurch wird ein Luftstrom erzeugt, der den Rauch und die Dämpfe zur Absaugfläche hin befördert. Nach Abschluss des Kochvorgangs die Abzugshaube noch so lange laufen lassen, bis alle Dämpfe und Gerüche abgesaugt sind. Es besteht eventuell auch die Möglichkeit, mit Hilfe der Timer-Funktion die automatische Abschaltung der Abzugshaube nach 15 Minuten Betrieb einzustellen.
WELCHE GESCHWINDIGKEITSSTUFE SOLL GEWÄHLT WERDEN? Geschwindigkeit 1: Hält die Luft bei geringem Stromverbrauch rein. Geschwindigkeit 2: Wird für normale Bedingungen verwendet. Geschwindigkeit 3: Wird bei Vorhandensein von starken Gerüchen oder Dämpfen verwendet. Geschwindigkeit 4: Wird für eine schnelle Beseitigung von Gerüchen oder Dämpfen verwendet.
Um die Umweltbelastung zu verringern, wird empfohlen, immer die mindeste Geschwindigkeit einzustellen, die für die erforderliche Saugleistung geeignet ist.
WANN MÜSSEN DIE FILTER GEREINIGT ODER AUSGETAUSCHT WERDEN? Die Metallfilter müssen jeweils nach 30 Betriebsstunden gereinigt werden. Für weitere Details siehe Kapitel “WARTUNG”.
ELEKTRONISCHE DRUCKKNOPFTAFEL

Motor ON/OFF

Motor OFF Langer Impuls: Regulierung der Farbtemperatur des Lichts von 2700K-5600K

Erhöhung der Geschwindigkeit von 1 bis 4 Die Geschwindigkeit 4 ist nur für einige Minuten aktiviert, dann wird die Geschwindigkeit 3 aktiviert.

Die Geschwindigkeiten werden von den an den Tasten vorhandenen LEDs signalisiert:
Geschwindigkeit 1
Geschwindigkeit 2

Drosselung der Geschwindigkeit von 4 bis 1

(LED “+” blinkend)

Geschwindigkeit 3 Geschwindigkeit 4

Einschalten / Ausschalten des Lichts Kurzer Impuls: Ein- und Ausschalten des Lichts Langer Impuls: Intensität regeln

TIMER (rote blinkende LED) Selbstausschaltung nach 15 Minuten Die Funktion wird deaktiviert (rote LED ausgeschaltet), wenn: – man erneut die Taste TIMER ( ) drückt. – wenn man die Taste ON/OFF ( ) drückt.

Wenn die Druckknopftafel völlig deaktiviert ist, muss vor der Benachrichtigung des Technischen Kundendienstes die Stromzufuhr des Haushaltsgeräts vorübergehend unterbrochen werden (etwa 5″), und zwar durch die Betätigung des Hauptschalters, um den normalen Betrieb wiederherzustellen. Sollte dies nicht helfen, ist der Technische Kundendienst zu rufen.

18

DEUTSCH

GEBRAUCH DER FERNBEDIENUNG (OPTION)
VORSICHT!: Die Abzugshaube nicht in der Nähe von elektromagnetischen Quellen (z.B. Mikrowellenofen) positionieren, welche die Fernbedienung und die Elektronik der Haube stören könnten. Der maximale Betriebsabstand beträgt 5 Meter. Diese Entfernung kann sich bei elektromagnetischen Störungen verkürzen. Die Fernbedienung arbeitet bei 433,92 MHz. Die Fernbedienung besteht aus zwei Teilen: – dem in der Abzugshaube integrierten Empfänger; – dem Sender, der hier in der Abbildung dargestellt wird.
BESCHREIBUNG SENDERBEFEHLE
UP Einschaltung des Motors und Geschwindigkeitserhöhung von 1 bis 4. Die vierte Geschwindigkeit wird nur für einige Minuten aktiviert.
DOWN Geschwindigkeitsreduktion und Abschaltung des Motors.
Einschalten / Ausschalten des Lichts Kurzer Impuls: Ein- und Ausschalten des Lichts Langer Impuls: Intensität regeln
TIMER ON: Automatische Abschaltung des Motors nach 15 Min. Die Funktion wird automatisch deaktiviert, wenn sich der Motor abschaltet (Taste )
Bedienungsübertragung aktiv
AKTIVIERUNGSVERFAHREN Vor Verwendung der Fernbedienung, folgendes Verfahren auf der Druckknopftafel der Abzugshaube ausführen: · Gleichzeitig die Tasten LICHT ( ) und TIMER ( ) drücken, bis alle LED-Lampen zu
blinken beginnen. · Die beiden Tasten freigeben und noch einmal die Taste LICHT ( ) drücken, bis alle
LED-Lampen eingeschaltet sind. · Die Taste LICHT ( ) freigeben: jetzt ist der Empfänger aktiv. Diese Methode kann auch für die Deaktivierung des Empfängers ausgeführt werden.
ÄNDERUNG DES CODES DER FERNBEDIENUNG Bei elektromagnetischen Störungen oder bei mehr als einer Funksteuerung in der Nähe kann ein neuer Code nach folgendem Verfahren erzeugt werden:
1) – EINEN NEUEN CODE ERSTELLEN Das Verfahren wird auf der Fernbedienung ausgeführt.
· Gleichzeitig die Tasten LICHT und TIMER drücken, bis das Display zu blinken beginnt.
· Die Taste DOWN der Fernbedienung drücken: der neue Code wird durch 3-maliges kurzes Blinken auf dem Display bestätigt. Der neue Code löscht und ersetzt den alten werkseingestellten Code.
2) – VERBINDUNG DER FUNKSTEUERUNG MIT DER ABZUGSHAUBE ÜBER DIE BEDIENTAFEL
die Taste TIMER ( ) der Druckknopftafel der Abzugshaube für 2 Sekunden gedrückt halten: die LED wird eingeschaltet. innerhalb von 5 Sekunden irgendeine Taste auf der Fernbedienung betätigen.
WIEDERHERSTELLUNG DES WERKSEINGESTELLTEN CODES das Verfahren muss bei Weitergabe der Abzugshaube ausgeführt werden.
· Gleichzeitig die Tasten UP und DOWN der Fernbedienung für mehr als 5 Sekunden drücken: die erfolgte Wiederherstellung wird durch dreimaliges kurzes Blinken auf dem Display bestätigt.
· Die Zuordnung von Abzugshaube und Fernbedienung wie in Punkt 2 beschrieben vornehmen.

WARTUNG
Vor jedem Reinigungs- oder Wartungseingriff das Gerät durch Ziehen des Netzsteckers oder Betätigung des Hauptschalters vom Stromnetz trennen. Es dürfen keine Tücher mit rauer Oberfläche oder Reinigungsmittel verwendet werden, die scheuernde, säurehältige oder korrosive Substanzen enthalten. Eine kontinuierliche Wartung gewährleistet langfristig einen guten Betrieb und eine gute Leistung. Besondere Aufmerksamkeit muss den Metallfettfiltern und den Aktivkohlefiltern geschenkt werden: eine häufige Reinigung der Filter und ihrer Halterungen gewährleistet, dass sich an der Abzugshaube kein Fett ablagert, das leicht entzündlich und somit gefährlich ist.
REINIGUNG DER AUSSENFLÄCHEN
Es wird empfohlen, die Außenflächen der Abzugshaube mindestens alle 2 Wochen zu reinigen, um zu vermeiden, dass ölige und fettige Substanzen die Stahloberflächen angreifen. Für die Reinigung der Abzugshaube aus gebürstetem Edelstahl empfiehlt der Hersteller die Verwendung der Reinigungstücher “Magic Steel”. Alternativ dazu und für alle anderen Arten von Oberflächen muss die Reinigung mit einem feuchten Lappen mit neutralem Reinigungsmittel oder mit denaturiertem Alkohol ausgeführt werden. Am Ende der Reinigung die Abzugshaube mit weichen Tüchern sorgfältig abwischen und abtrocknen.
Im Bereich der Bedientafel und der Beleuchtungsvorrichtungen nur wenig Wasser verwenden, um zu vermeiden, dass die elektronischen Bauteile feucht werden.
Die Reinigung der Glasplatten darf nur mit spezifischen nicht korrosiven oder scheuernden Reinigungsmitteln mit einem weichen Tuch ausgeführt werden. Der Hersteller lehnt jede Haftung ab, falls diese Anweisungen nicht befolgt werden.
REINIGUNG DER INNENFLÄCHEN
Die Reinigung von elektrischen oder zum Motor gehörenden Teilen in der Abzugshaube mit Flüssigkeiten oder Lösungsmitteln ist verboten. Für die Metallteile siehe den vorigen Abschnitt.
METALLFETTFILTER
Deshalb wird empfohlen, die Metallfilter häufig zu reinigen (mindestens ein Mal pro Monat), indem sie ungefähr 1 Stunde lang in kochend heißem Wasser mit Geschirrspülmittel eingeweicht werden. Darauf achten, sie nicht zu biegen. Keine korrosiven, säurehältigen oder alkalischen Reinigungsmittel verwenden. Die Metallfilter sorgfältig abspülen und vor der Montage abwarten, bis sie vollständig trocken sind. Das Waschen im Geschirrspüler ist erlaubt. Für die Montage und Demontage der Metallfettfilter siehe die Montageanleitung.
BELEUCHTUNG
Die Abzugshaube ist mit einer Beleuchtung mit Hochleistungs-LEDs mit geringem Stromverbrauch und sehr langer Lebensdauer bei normalem Gebrauch ausgestattet. Bei Beschädigung den Händler oder den autorisierten Kundendienst für die Reparatur kontaktieren.
ÖLAUFFANGWANNE
Es wird empfohlen, die Wanne alle 2 Wochen zu reinigen. Keine korrosiven, säurehältigen oder alkalischen Reinigungsmittel verwenden. Für eine sorgfältigere Reinigung die Ölauffangwanne (siehe Anweisungen) herausziehen und sie mit kochendem Wasser und Geschirrspülmittel säubern. Die Wanne sorgfältig abspülen und vor der Montage abwarten, bis sie vollständig trocken ist.
Die Ölwanne darf nicht in der Spülmaschine gereinigt werden.

19

ENTSORGUNG AM ENDE DER LEBENSDAUER
Das Symbol der durchgestrichenen Abfalltonne auf Rädern auf Ihrem Gerät bedeutet, dass es sich um ein WEEE-Produkt handelt, das somit ein “Abfall aus elektrischen und elektronischen Geräten”ist. Darum darf es nicht der ungetrennten Abfallentsorgung zugeführt werden (also zusammen mit “unsortiertem Hausmüll” weggeworfen werden), sondern muss getrennt verwaltet werden, um es entsprechenden Eingriffen für eine Wiederverwertung oder einer spezifischen Behandlung zu unterziehen, damit die etwaigen umweltgefährdenden Stoffe sicher entfernt und entsorgt werden und die recycelfähigen Rohstoffe entnommen werden. Die sachgemäße Entsorgung dieses Produktes trägt dazu bei, wertvolle Ressourcen zu schützen und potentiell negative Auswirkungen auf die Gesundheit des Menschen und die Umwelt zu vermeiden, die hingegen durch eine unsachgemäße Entsorgung dieser Abfälle entstehen könnten. Für weitere Informationen bezüglich der in Ihrer Nähe liegenden speziellen Sammelstellen bitten wir Sie, die lokalen Behörden zu kontaktieren. Für eine unsachgemäße Entsorgung dieser Abfälle könnten in Übereinstimmung mit der nationalen Gesetzgebung Strafen vorgesehen sein. INFORMATIONEN ZUR ENTSORGUNG INNERHALB DER EUROPÄISCHEN UNION Die europäische Richtlinie zu den WEEE-Geräten wurden in jedem Land auf andere Weise ausgelegt. Darum sollten bei der Entsorgung dieses Geräts die lokalen Behörden oder der Händler kontaktiert werden, um sich über die korrekte diesbezügliche Vorgehensweise zu informieren. INFORMATIONEN ZUR ENTSORGUNG IN LÄNDERN AUSSERHALB DER EUROPÄISCHEN UNION Das Symbol der durchgestrichenen Abfalltonne auf Rädern ist nur in der Europäischen Union gültig: Wenn das Gerät in anderen Ländern entsorgt werden soll, sollten die lokalen Behörden oder der Händler kontaktiert werden, um sich über die korrekte diesbezügliche Vorgehensweise zu informieren. ACHTUNG!
Der Hersteller behält sich das Recht vor, jederzeit und ohne Vorankündigung Änderungen an den Geräten vorzunehmen. Der Druck, die Übersetzung und die – auch auszugsweise – Reproduktion des vorliegenden Handbuchs müssen zuvor vom Hersteller genehmigt werden. Die im vorliegenden Handbuch enthaltenen technischen Informationen, die grafischen Darstellungen sowie die Spezifikationen dienen nur als Richtlinie und dürfen nicht verbreitet werden. Das Handbuch wurde in italienischer Sprache verfasst, der Hersteller übernimmt keine Haftung für etwaige Transkriptions- oder Übersetzungsfehler.
20

FRANÇAIS

CONSIGNES DE SÉCURITÉ ET MISES EN GARDE
Le travail d’installation doit être effectué par des installateurs compétents et qualifiés, conformément aux indications du présent manuel et en respectant les normes en vigueur. Si le câble d’alimentation ou d’autres composants sont endommagés, la hotte NE doit PAS être utilisée : débrancher la hotte de l’alimentation électrique et contacter le revendeur ou un Centre d’Assistance technique agréé pour la réparation. Ne pas modifier la structure électrique, mécanique et fonctionnelle de l’appareil. Ne pas tenter d’effectuer soi-même des réparations ou des remplacements : les interventions effectuées par des personnes non compétentes et non qualifiées peuvent provoquer des dommages, éventuellement très graves, à des choses et/ou à des personnes, non couverts par la garantie du Fabricant. MISES EN GARDE POUR L’INSTALLATEUR SÉCURITÉ TECHNIQUE

SÉCURITÉ ÉLECTRIQUE Le circuit électrique, auquel est reliée la hotte, doit être aux normes et muni d’un raccordement à la terre, conformément
aux normes de sécurité du pays d’utilisation ; il doit en outre être conforme aux normes européennes sur l’antiparasite radio. Avant d’installer la hotte, s’assurer que la tension du secteur correspond à celle reportée sur la plaque qui se trouve à l’intérieur de la hotte. La prise utilisée pour le branchement électrique doit être facilement accessible avec l’appareil installé : si cela n’était pas possible, prévoir un interrupteur général pour déconnecter la hotte en cas de besoin. Toute modification de l’installation électrique devra être uniquement effectuée par un électricien qualifié. En cas de dysfonctionnements de l’appareil, ne pas tenter de résoudre personnellement le problème, mais contacter le revendeur ou un Centre d’Assistance agréé pour la réparation.

Avant d’installer la hotte, contrôler l’intégrité et la fonctionnalité de chaque partie : en cas de constatation d’anomalies, ne pas procéder à l’installation et contacter le Revendeur.

Pendant l’installation de la hotte, débrancher l’appareil en retirant la prise ou en agissant sur l’interrupteur général. SÉCURITÉ ÉVACUATION DES FUMÉES

En cas de constatation d’un défaut esthétique, la hotte NE doit PAS être installée ; la remettre dans son emballage d’origine et contacter le Revendeur. Après son installation, aucune réclamation ne sera acceptée pour des défauts esthétiques. Pendant l’installation, toujours utiliser des équipements de protection individuelle (ex. : des chaussures de sécurité) et adopter un comportement prudent et correct. Le kit de fixation (vis et chevilles) fourni avec la hotte est utilisable uniquement sur des murs en maçonnerie : s’il faut installer la hotte sur des murs de matériau différent, évaluer d’autres systèmes de fixation en tenant compte de la résistance du mur et du poids de la hotte (indiqué à la page 2). Tenir compte du fait que l’installation avec des systèmes de fixation différents de ceux fournis ou non conformes peut comporter des risques de nature électrique et de tenue mécanique. Ne pas installer la hotte à l’extérieur et ne pas l’exposer à des agents atmosphériques (pluie, vent, etc.).

Ne pas raccorder l’appareil aux conduits d’évacuation des fumées produites par la combustion (par ex. chaudières, cheminées, etc.) Avant l’installation de la hotte, s’assurer que toutes les normes en vigueur sur l’évacuation de l’air à l’extérieur de la pièce sont respectées. Déviation pour l’Australie et la Nouvelle Zélande: Les hottes de cuisine et les autres aspirateurs des fumées de cuisson peuvent nuire au bon fonctionnement des appareils qui brûlent du gaz ou d’autres combustibles (y compris ceux qui se trouvent dans d’autres pièces) en raison du reflux des gaz de combustion. Ces gaz peuvent potentiellement entraîner une intoxication au monoxyde de carbone. Après l’installation d’une hotte de cuisine ou d’un autre aspirateur des fumées de cuisson, le fonctionnement des appareils à gaz canalisé doit être testé par une personne compétente pour vérifier l’absence de reflux des gaz de combustion. (AS/NZS 60335.2.31:2013/A4:2020).

21

MISES EN GARDE POUR L’UTILISATEUR Ces mises en garde ont été rédigées pour votre sécurité et pour celle d’autrui, nous vous prions donc de lire attentivement
toutes les parties de ce manuel avant d’utiliser l’appareil ou de le nettoyer. Le fabricant décline toute responsabilité pour d’éventuels dommages, directs ou indirects, pouvant être causés aux personnes, aux choses et aux animaux domestiques, suite au non-respect des mises en garde de sécurité indiquées dans ce manuel. Il est très important que ce manuel d’instructions soit conservé avec l’appareil pour toute consultation future. Si l’appareil devait être vendu ou transféré à une autre personne, s’assurer que le manuel soit remis avec celui-ci, de manière à ce que le nouvel utilisateur puisse connaître le fonctionnement de la hotte et des mises en garde relatives. Après l’installation des hottes en acier inox, il est nécessaire d’effectuer le nettoyage de celles-ci pour retirer les résidus de colle de la protection et les taches éventuelles de graisse et d’huile qui, si on ne les enlève pas, peuvent être cause de détérioration irréversible de la surface de la hotte. Pour cette opération, le fabricant conseille d’utiliser les serviettes fournies, disponibles même à l’achat. Exiger des pièces de rechange originales. DESTINATION D’UTILISATION L’appareil est destiné, seulement et exclusivement, pour l’aspiration de fumées générées par la cuisson d’aliments en milieu domestique, non professionnel : toute autre utilisation différente de celle-ci est impropre et peut provoquer des dommages à des personnes, choses et animaux domestiques, et dégage le Fabricant de toute responsabilité. L’appareil peut être utilisé par des enfants de plus de 8 ans et des personnes ayant des capacités physiques, sensorielles ou mentales réduites, ou dépourvues d’expérience ou de connaissances nécessaires, pourvu qu’ils soient sous surveillance ou bien après qu’ils aient reçu les instructions relatives à une utilisation sûre de l’appareil et qu’ils aient compris les dangers correspondants. Les enfants ne doivent pas jouer avec l’appareil. Le nettoyage et la maintenance destinés à être effectués par l’utilisateur ne doivent pas être effectués par des enfants sans surveillance.

MISES EN GARDE POUR L’UTILISATION ET LE NETTOYAGE
Avant de procéder à toute opération de nettoyage ou d’entretien, désactiver l’appareil en enlevant la fiche ou en agissant sur l’interrupteur général.
Ne pas utiliser la hotte avec les mains mouillées ou les pieds nus. Contrôler toujours que toutes les parties électriques (lumières, aspirateur) soient éteintes lorsque l’appareil n’est pas utilisé. Le poids maximum total d’éventuels objets positionnées ou suspendus (où c’est prévu) sur la hotte ne doit pas dépasser 1,5 kg. Contrôler les friteuses pendant l’utilisation : l’huile surchauffée pourrait s’enflammer. Ne pas allumer de flammes nues sous la hotte. Ne pas cuisiner avec une flamme nue sous la hotte. Ne jamais utiliser la hotte sans les filtres métalliques anti-graisse ; dans ce cas, la graisse et la saleté se déposeraient dans l’appareil et compromettrait son fonctionnement. Des parties accessibles de la hotte peuvent être chaudes si elles sont utilisées avec des appareils de cuisson. Ne pas effectuer d’opérations de nettoyage si des parties de la hotte sont encore chaudes. Si le nettoyage n’est pas mené conformément aux modalités et avec les produits indiqués dans le présent manuel, un risque d’incendie est possible. Couper l’interrupteur général si l’appareil n’est pas utilisé pendant de longues périodes.
En cas d’utilisation simultanée avec d’autres éléments (chaudières, poêles, cheminées, etc.) alimentés au gaz ou avec d’autres combustibles, pourvoir à une ventilation adéquate du local où s’effectue l’aspiration de la fumée, conformément aux normes en vigueur.
INSTALLATION
partie réservée uniquement à un personnel qualifié
Avant d’effectuer l’installation de la hotte, lire attentivement le chap. « CONSIGNES DE SÉCURITÉ ET MISES EN GARDE ».
CARACTÉRISTIQUES TECHNIQUES
Les données techniques de l’appareil sont reportées sur des étiquettes placées à l’intérieur de la hotte.
POSITIONNEMENT
La distance minimum entre la partie la plus haute de l’appareil de cuisson et la partie la plus basse de la hotte de cuisine est indiquée dans les instructions de montage. En général, quand la hotte de cuisine est située au-dessus d’un plan de cuisson à gaz, cette distance doit être d’au moins 65 cm (25,6”). Cependant, sur la base de la norme EN60335-2-31, la distance minimum entre le plan de cuisson et la partie inférieure de la hotte peut être réduite à la hauteur indiquée dans les instructions de montage.

22

FRANÇAIS

Si les instructions de la table de cuisson au gaz spécifient une distance supérieure, il faut en tenir compte. Ne pas installer la hotte à l’extérieur et ne pas l’exposer à des agents atmosphériques (pluie, vent, etc.).
BRANCHEMENT ÉLECTRIQUE
(partie réservée uniquement à un personnel qualifié)
Avant d’effectuer toute opération sur la hotte, débrancher l’appareil du réseau électrique. Veiller à ce que les fils électriques à l’intérieur de la hotte ne soient pas débranchés ou coupés : dans le cas contraire, contacter le Centre d’Assistance le plus proche. Pour le raccordement électrique contacter un personnel qualifié. Le raccordement doit être effectué conformément aux dispositions de lois en vigueur. Avant de raccorder la hotte au réseau électrique, contrôler que : · la tension du secteur corresponde à celle reportée sur la plaque des données qui se trouve à l’intérieur de la hotte ; · le circuit électrique soit aux normes et puisse supporter la charge de l’appareil (voir la plaque des caractéristiques techniques située à l’intérieur de la hotte) ; · la fiche et le câble d’alimentation ne rentrent pas en contact avec des températures supérieures à 70 °C ; · l’installation d’alimentation soit munie d’un raccordement à la terre efficace et correct, conformément aux normes en vigueur ; · la prise utilisée pour le branchement soit facilement accessible, une fois la hotte installée. En cas d’ : · appareils équipés d’un câble sans fiche : la fiche à utiliser doit être du type « normalisé ». Les fils doivent être raccordés de la manière suivante : le fil jaune-vert doit pour la mise à la terre, le fil bleu pour le neutre et le fil marron pour la phase. La fiche doit être raccordée à une prise de sécurité adéquate. · appareil fixe dépourvu de câble d’alimentation et de fiche ou d’un autre dispositif qui assure la déconnexion du réseau, avec une distance d’ouverture des contacts permettant la déconnexion complète dans les conditions de la catégorie de surtension III. Ces dispositifs de déconnexion doivent être prévus dans le réseau d’alimentation conformément aux règles d’installation.
Le câble de terre jaune/vert ne doit pas être interrompu par l’interrupteur. Le Fabricant décline toute responsabilité si les normes de sécurité ne sont pas respectées.
ÉVACUATION DES FUMÉES
HOTTE À ÉVACUATION EXTÉRIEURE (ASPIRANTE)
Dans cette version, les fumées et les vapeurs sont envoyées vers l’extérieur à travers un tuyau d’évacuation. À cette fin, le raccord de sortie de la hotte doit être raccordé par un tuyau à une sortie extérieure.
Le tuyau de sortie doit avoir : · un diamètre égal ou supérieur à celui du raccord de la hotte. · une légère inclinaison vers le bas (chute) dans les tronçons horizontaux pour
éviter que la condensation ne reflue dans le moteur. · le nombre minimum indispensable de coudes. · La longueur minimale indispensable pour éviter toute vibration et réduire la
capacité aspirante de la hotte. Il est nécessaire d’isoler la tuyauterie si elle passe par des endroits non chauffés. Pour empêcher les retours d’air de l’extérieur, un clapet de non retour est installé en présence des moteurs avec 800 m3/h ou supérieurs.
Déviation pour l’Allemagne : quand la hotte de la cuisine et des appareils alimentés avec une énergie différente de l’énergie électrique sont en fonction simultanément, la pression négative dans la pièce ne doit pas dépasser 4 Pa (4 x 10-5 bars).

INSTRUCTIONS DE MONTAGE
partie réservée uniquement à un personnel qualifié
La hotte peut être installée selon diverses configurations. Les phases de montage génériques valent pour toutes les installations ; par contre, là où il est spécifié, suivre les phases correspondant à la configuration désirée.
FONCTIONNEMENT
QUAND FAUT-IL ALLUMER LA HOTTE ? Allumer la hotte au moins une minute avant de commencer à cuisiner pour canaliser les fumées et les vapeurs vers la surface d’aspiration. Au terme de la cuisson, laisser la hotte en fonction jusqu’à l’aspiration complète de toutes les vapeurs et odeurs : grâce à la fonction Timer, il est possible de programmer l’arrêt automatique de la hotte au bout de 15 minutes de fonctionnement.
QUELLE VITESSE CHOISIR ? I vitesse : maintient l’air pur avec de faibles consommations d’électricité. II vitesse : conditions normales d’utilisation. III vitesse : présence de fortes odeurs et vapeurs. IV vitesse : élimination rapide des odeurs et vapeurs.
Afin de réduire l’impact sur l’environnement, il est conseillé de toujours régler la vitesse minimale appropriée au niveau d’aspiration requis.
QUAND LAVER OU CHANGER LES FILTRES ? Les filtres métalliques doivent être lavés après 30 heures d’utilisation. Pour toute information supplémentaire, voir le chap. « ENTRETIEN ».
COMMANDE ÉLECTRONIQUE

Moteur ON/OFF

Moteur OFF Pression longue : changement couleur de lumière de 2700 K à 5600 K

Augmentation de la vitesse de 1 à 4 La vitesse 4 n’est activée que pendant quelques minutes, puis la vitesse 3 s’active.

Les vitesses sont signalées par les lampes LED présentes sur les touches :
Vitesse 1

Vitesse 2

Diminution de la vitesse de 4 à 1

Vitesse 3

Vitesse 4 (LED « + » clignotante)

Allumage / extinction lumière Pression brève : allume et éteint la lumière Pression longue : régler l’intensité

TIMER (LED rouge clignotante) Arrêt automatique après 15 min. La fonction se désactive (LED rouge éteinte) si : – Vous appuyez une autre fois sur la touche TIMER ( ). – Si vous appuyez sur la touche ON/OFF ( ).

Si le boîtier de commande est totalement inactif, avant de contacter le service d’Assistance technique, couper momentanément (environ 5″) l’alimentation électrique de l’appareil électroménager, de préférence au moyen de l’interrupteur général, pour rétablir le fonctionnement normal. Si cette opération ne s’avère pas efficace, contacter le service d’Assistance technique.

23

UTILISATION DE LA RADIOCOMMANDE (OPTION)
MISES EN GARDE : Placer la hotte loin de toute source d’ondes électromagnétiques (ex. fours à micro-ondes) susceptible d’interférer avec la radiocommande et avec l’électronique de la hotte. La distance maximum de fonctionnement est de 5 mètres, qui peut varier par défaut en présence d’interférences électromagnétiques. Radiocommande fonctionnant à 433,92 MHz. La radiocommande est composée de deux parties : – le récepteur intégré à la hotte ; – l’émetteur représenté ici sur la figure.
DESCRIPTION DES COMMANDES ÉMETTEUR
UP Démarrage du moteur et augmentation de la vitesse de 1 à 4 La vitesse 4 n’est activée que pendant quelques minutes.
DOWN Diminution de la vitesse et arrêt du moteur.
Allumage / extinction lumière Pression brève : allume et éteint la lumière Pression longue : régler l’intensité
TIMER ON: Arrêt automatique du moteur après 15 minutes. La fonction se désactive automatiquement si le moteur est arrêté (touche ).
Transmission commande activée
PROCÉDURE D’ACTIVATION Avant d’utiliser la radiocommande, effectuer la procédure suivante sur le tableau des commandes de la hotte : · Appuyer en même temps sur les touches LUMIÈRE ( ) et TIMER ( ) jusqu’à
ce que toutes les LED commencent à clignoter. · Relâcher les deux touches et appuyer encore sur la touche LUMIÈRE ( )
jusqu’à ce que toutes les LED s’allument. · Relâcher la touche LUMIÈRE ( ) : maintenant le récepteur est activé. La procédure est également utilisée pour désactiver le récepteur.
MODIFICATION DU CODE DE LA RADIOCOMMANDE En cas d’interférences électromagnétiques ou si plusieurs radiocommandes se trouvent à proximité, un nouveau code peut être généré selon la procédure suivante : 1) – CRÉER UN NOUVEAU CODE La procédure doit être effectuée sur la radiocommande.
· Appuyer en même temps sur les touches LUMIÈRE et TIMER jusqu’à ce que l’écran commence à clignoter.
· Appuyer sur la touche DOWN de la radiocommande : la mémorisation du nouveau code est confirmée par 3 brefs clignotements de l’écran. Le nouveau code annule et remplace le précédent code effectué en usine.
2) – ASSOCIATION DE LA RADIOCOMMANDE À LA HOTTE VIA LE BOÎTIER DE COMMANDE
appuyer sur la touche TIMER ( ) du tableau des commandes de la hotte pendant 2 secondes : la LED s’allume. appuyer sur n’importe quelle touche de la radiocommande dans un délai de 5 secondes.
RÉTABLISSEMENT DU CODE EFFECTUÉ EN USINE la procédure doit être effectuée en cas de cession de la hotte. · Appuyer en même temps sur les touches UP et DOWN de la radio-
commande pendant plus de 5 secondes : le rétablissement est confirmé par trois brefs clignotements de l’écran. · Procéder à l’association entre la hotte et la radiocommande comme décrit au point 2.

ENTRETIEN
Avant de procéder à toute opération de nettoyage ou d’entretien, désactiver l’appareil en enlevant la fiche ou en agissant sur l’interrupteur général. Il ne faut pas utiliser de détergents contenant des substances abrasives, acides ou corrosives, ni de chiffons ayant des surfaces rêches. Un entretien constant garantit un bon fonctionnement et un bon rendement dans le temps. Il faut accorder une attention particulière aux filtres métalliques anti-graisse : le nettoyage fréquent des filtres et de leurs supports fait en sorte que les graisses inflammables ne s’accumulent pas.

NETTOYAGE DES SURFACES EXTERNES
Il est conseillé de nettoyer les surfaces externes de la hotte au moins tous les 15 jours afin d’éviter que les substances huileuses ou grasses ne puissent les attaquer. Pour le nettoyage de la hotte, réalisée en acier inox brossé, le Fabricant conseille l’utilisation des serviettes « Magic Steel ». Sinon, pour tous les autres types de surface, le nettoyage doit être effectué en utilisant un chiffon humide légèrement imprégné d’un détergent liquide neutre ou avec de l’alcool dénaturé. Terminer le nettoyage en rinçant et en essuyant soigneusement avec des chiffons doux.
Ne pas utiliser trop d’eau à proximité du tableau de commande et des dispositifs d’éclairage pour éviter que l’humidité atteigne des parties électroniques.
Le nettoyage des panneaux en verre doit être effectué uniquement avec des détergents spécifiques non corrosifs ni abrasifs avec un chiffon doux. Le Fabricant décline toute responsabilité si ces instructions ne sont pas respectées.

NETTOYAGE DES SURFACES INTERNES

dent.

Il est interdit de nettoyer les parties électriques ou celles relatives au moteur à l’intérieur de la hotte, avec des liquides ou des solvants. Pour les parties métalliques internes, consulter le paragraphe précé-

FILTRES MÉTALLIQUES ANTI-GRAISSE
Il est conseillé de laver souvent les filtres métalliques (au moins tous les mois) en les laissant tremper pendant une heure environ dans de l’eau bouillante avec du produit vaisselle, en évitant de les plier. Ne pas utiliser de détergents corrosifs, acides ou alcalins. Les rincer soigneusement et attendre qu’ils soient bien secs avant de les remonter. Le lavage au lave-vaisselle est permis. Pour l’extraction et l’introduction des filtres métalliques anti-graisse, voir les instructions de montage.
ÉCLAIRAGE
La hotte est équipée d’un éclairage à led à haute efficacité, à basse consommation et à durée très élevée en conditions d’utilisation normales. En cas de panne, contacter le revendeur ou un Centre d’Assistance agréé pour la réparation.
BAC DE RÉCUPÉRATION DE L’HUILE
Il est conseillé de nettoyer le bac tous les 15 jours. Ne pas utiliser de détergents corrosifs, acides ou alcalins. Pour un nettoyage en profondeur, enlever le bac de récupération de l’huile (voir les instructions) et le laver avec de l’eau bouillante et du liquide vaisselle. Le rincer soigneusement et attendre qu’il soit bien sec avant de le remonter.

Ne pas laver le bac de récupération de l’huile au lave-vaisselle.

24

FRANÇAIS

ÉLIMINATION EN FIN DE VIE
Le symbole de la poubelle barrée reporté sur l’appareil en votre possession indique que le produit est un DEEE, c’est-à-dire un « Déchet dérivant d’Équipements Électriques et Électroniques » et, par conséquent, il ne doit pas être jeté dans la poubelle non sélective (c’està-dire avec les « déchets urbains mixtes »), mais il doit être géré séparément afin d’être soumis aux opérations spécifiques pour sa réutilisation ou bien à un traitement spécifique, pour enlever et éliminer en toute sécurité toute substance néfaste pour l’environnement et extraire les matières premières pouvant être recyclées. L’élimination correcte de ce produit contribuera à sauvegarder de précieuses ressources et à éviter de potentiels effets négatifs pour la santé de l’homme et pour l’environnement, qui pourraient être causés par une élimination inappropriée des déchets. Nous vous prions de contacter les autorités locales pour de plus amples détails sur le point d’élimination désigné le plus proche. Des amendes pourraient être appliquées pour l’élimination incorrecte de ces déchets, conformément à la législation nationale. INFORMATIONS SUR L’ÉLIMINATION DANS LES PAYS DE L’UNION EUROPÉENNE La directive communautaire sur les appareils DEEE a été transposée en mode différent par chaque nation, par conséquent si l’on souhaite éliminer cet appareil nous conseillons de contacter les autorités locales ou le revendeur pour demander la méthode d’élimination correcte. INFORMATIONS SUR L’ÉLIMINATION DANS LES PAYS QUI N’APPARTIENNENT PAS À L’UNION EUROPÉENNE Le symbole de la poubelle barrée est valable seulement dans l’Union Européenne : si l’on souhaite éliminer cet appareil dans d’autres pays, nous conseillons de contacter les autorités locales ou le revendeur pour demander la méthode d’élimination correcte. ATTENTION !
Le Fabriquant se réserve le droit d’apporter des modifications aux appareils à tout moment et sans préavis. L’impression, la traduction et la reproduction, même partielle, du présent manuel doivent être autorisées par le Fabricant. Les informations techniques, les représentations graphiques et les spécifications présentes dans ce manuel sont indicatives et non divulguables. La langue de rédaction du manuel est l’italien, le Fabricant n’est pas responsable d’éventuelles erreurs de transcription ou de traduction.
25

INSTRUCCIONES DE SEGURIDAD Y ADVERTENCIAS
Las operaciones de instalación deben efectuarlas instaladores competentes y cualificados, siguiendo cuanto se indica en este manual y respetando las normas en vigor. Si el cable de alimentación u otros componentes están dañados, NO utilice la campana. Desconecte la campana de la alimentación eléctrica y póngase en contacto con el vendedor o con un centro de asistencia técnica autorizado para la reparación. No cambie la estructura eléctrica, mecánica y de funcionamiento del equipo. No trate de realizar por sí solo reparaciones o sustituciones: las intervenciones realizadas por personas no competentes y cualificadas pueden provocar daños, incluso graves, a cosas y/o personas que no están cubiertos por la garantía del fabricante.

dad del país de uso; además debe respetar las normativas europeas sobre la protección contra interferencias radio. Antes de instalar la campana, controle que la tensión de red coincida con la indicada en la placa colocada en el interior de la campana. La toma usada para la conexión eléctrica debe ser fácilmente accesible con el aparato instalado; en caso contrario, prevea un interruptor general para desconectar la campana. Cualquier modificación en la instalación eléctrica deberá ser realizada sólo por un electricista cualificado. En caso de problemas de funcionamiento del equipo, no intente solucionar el problema por sí solo y póngase en contacto con el vendedor o un centro de asistencia autorizado para la reparación.

ADVERTENCIAS PARA EL INSTALADOR SEGURIDAD TÉCNICA

Durante la instalación de la campana, desconecte el equipo quitando el enchufe o accionando el interruptor general.

Antes de instalar la campana controle la integridad y funcionalidad de cada una de sus partes: si se notan anomalías no realice la instalación y póngase en contacto con el revendedor. NO instale la campana si detecta un defecto estético; vuélvala a colocar en su embalaje original y póngase en contacto con el revendedor. Una vez instalada, no se aceptará ninguna reclamación por defectos estéticos. Durante la instalación, utilice siempre equipos de protección personal (ej. calzado de protección contra accidentes) y adopte comportamientos prudentes y correctos. El kit de fijación (tornillos, tacos y abrazaderas) que se entrega con la campana se puede usar solo en paredes de mampostería; si es necesario instalar la campana en paredes de material diferente, evalúe otros sistemas de fijación teniendo en cuenta la resistencia de la pared y el peso de la campana (indicado en la pág. 2). Tenga en cuenta que la instalación con sistemas de fijación diferentes a los suministrados o no conformes puede conllevar riesgos de tipo eléctrico y mecánico. No instale la campana en exteriores ni la exponga a agentes atmosféricos (lluvia, viento, etc.).

SEGURIDAD DESCARGA DE HUMOS No conecte el aparato a conductos de descarga de los humos producidos por la combustión (por ejemplo, calderas, chimeneas,
etc.). Antes de instalar la campana asegúrese de que se respeten todas las normativas vigentes sobre la descarga del aire en el exterior del local. Divergencia normativa para Australia y Nueva Zelanda: Las campanas extractoras y otros extractores de humos de cocina pueden afectar negativamente al funcionamiento seguro de los aparatos que queman gas u otros combustibles (incluidos los que se encuentran en otras habitaciones) debido al reflujo de los gases de combustión. Dichos gases pueden, potencialmente, derivar en intoxicación por monóxido de carbono. Tras la instalación de una campana extractora u otro extractor de humos de cocina, una persona competente debe probar el funcionamiento de los aparatos de gas de combustión para cerciorarse de que no se produzca el reflujo de los mismos. (AS/NZS 60335.2.31:2013/A4:2020).

SEGURIDAD ELÉCTRICA

La instalación eléctrica a la cual se conecta la campana debe respetar las normas correspondientes y tener obligatoriamente una conexión a tierra según las normas de seguri-

26

ESPAÑOL

ADVERTENCIAS PARA EL USUARIO Estas advertencias se han redactado para su seguridad y la del resto de personas; le rogamos que lea atentamente este manual
antes de instalar o de usar el aparato o realizar operaciones de limpieza en el mismo. El Fabricante declina toda responsabilidad por posibles daños que puedan ser provocados directa o indirectamente a personas, animales o cosas debido al incumplimiento de las advertencias de seguridad indicadas en este manual. Es muy importante que conserve este libro de instrucciones del equipo para consultas futuras. Si el equipo debe venderse o cederse a otra persona, compruebe que se adjunte el manual, de manera que el nuevo usuario pueda estar informado sobre el funcionamiento de la campana y sobre las advertencias correspondientes. Después de instalar las campanas de acero inoxidable es necesario limpiarlas para eliminar los residuos de cola del protector y las posibles manchas de grasa o y aceites que, de no eliminarse, pueden causar un deterioro irreparable en la superficie de la campana. Para esta operación, el fabricante recomienda usar las toallitas suministradas de serie, disponibles también a la venta. Exija piezas de recambio originales. DESTINO DE USO El aparato se puede usar única y exclusivamente para la aspiración de humos generados por la cocción de alimentos en cocinas domésticas, no profesionales; cualquier otro uso es inapropiado, puede provocar daños a personas, cosas y animales domésticos y exime al fabricante de toda responsabilidad. Los niños cuya edad no sea inferior a los 8 años y las personas con capacidades físicas, sensoriales o mentales reducidas y sin experiencia ni los conocimientos necesarios, pueden usar el equipo siempre que estén bajo supervisión o hayan recibido las correspondientes instrucciones para el uso seguro del equipo y para la comprensión de los peligros relacionados con este. Los niños no deben jugar con el equipo. Los niños no deben realizar sin vigilancia la limpieza y el mantenimiento destinados al usuario. ADVERTENCIAS PARA EL USO Y LA LIMPIEZA
Antes de realizar cualquier tipo de limpieza o de mantenimiento, desconecte el equipo desenchufándolo o usando el interruptor general. No use la campana con las manos mojadas o los pies descalzos.

Controle siempre que todas las partes eléctricas, (luces, aspirador), estén apagadas cuando no se use el equipo. El peso máximo total de los posibles objetos colocados o colgados (cuando esté previsto) en la campana no debe superar los 1,5 kg. Controle las freidoras mientras las está usando: El aceite recalentado podría inflamarse. No encienda llamas libres debajo de la campana. No cocine con llamas “libres” debajo de la campana. No use nunca la campana sin los filtros metálicos antigrasa; en este caso la grasa y la suciedad se depositarían en el equipo perjudicando su funcionamiento. Las partes accesibles de la campana pueden estar calientes cuando se usan con equipos de cocción. No realice operaciones de limpieza con las partes de la campana aún calientes. Si no se realiza la limpieza según las modalidades y los productos indicados en este manual, esto puede conllevar un riesgo de incendio. Desconecte el interruptor general, si no va a usar el equipo durante un periodo de tiempo prolongado.
En caso de utilizar simultáneamente otros equipos (calderas, estufas, hogares, etc.) alimentados con gas o con otros combustibles, prevea una adecuada ventilación del ambiente donde se realiza la aspiración de humos, según las normas vigentes.
INSTALACIÓN
parte reservada al personal cualificado
Antes de instalar la campana, lea atentamente el cap. “INSTRUCCIONES DE SEGURIDAD Y ADVERTENCIAS”.
CARACTERÍSTICAS TÉCNICAS
Los datos técnicos del aparato se encuentran en unas etiquetas colocadas dentro de la campana.
POSICIONAMIENTO
La distancia mínima entre la parte más alta del aparato para la cocción y la parte más baja de la campana de cocina se indica en las instrucciones de montaje. En general, cuando la campana de cocina está colocada en una encimera de cocción de gas, esta distancia debe ser al menos de 65 cm (25,6″). Sin embargo, en base de la norma EN60335-2-31, la distancia mínima entre la placa de cocción y la parte inferior de la campana puede reducirse a la altura indicada en las instrucciones de montaje. Si las instrucciones de la placa de cocción a gas especifican una distancia mayor, es necesario tomarla en cuenta. No instale la campana en exteriores ni la exponga a agentes atmosféricos (lluvia, viento, etc.).
CONEXIÓN ELÉCTRICA
(parte reservada solo a personal cualificado) Antes de efectuar cualquier tipo de operación en la campana, desconecte el equipo de la corriente eléctrica. Asegúrese de que no estén desconectados o cortados los hilos
eléctricos montados dentro de la campana: en caso contrario, póngase en contacto con el Centro de Asistencia más cercano. Para la conexión eléctrica consulte con el personal cualificado. La conexión debe realizarla conforme a las disposiciones de ley en vigor.

27

Antes de conectar la campana a la red eléctrica, controle que: · la tensión de red corresponda a la referida en los datos de la placa situada
dentro de la campana; · la instalación eléctrica cumpla la normativa y pueda soportar la carga (véanse
las características técnicas presentes dentro de la campana); · el enchufe y el cable de alimentación no entren en contacto con temperatu-
ras superiores a los 70 °C; · la instalación de alimentación disponga de una conexión de tierra eficaz y
correcta según las normas vigentes; · la toma usada para la conexión sea fácilmente accesible una vez instalada la
campana.
En caso de: · aparatos equipados con cable sin enchufe: el enchufe debe ser de tipo “nor-
malizado”. Los cables deben conectarse de la siguiente forma: amarillo-verde para la puesta a tierra, azul para el neutro y el hilo marrón para la fase. El enchufe ha de conectarse a una adecuada toma de seguridad. · aparato fijo sin cable de alimentación ni enchufe, ni de otro dispositivo que asegure la desconexión de la red, con una distancia de apertura de los contactos que permita la desconexión completa en las condiciones de la categoría de sobretensión III. Estos dispositivos de desconexión deben preverse en la red de alimentación en conformidad con las reglas de instalación.
El cable de tierra amarillo/verde no debe ser interrumpido por el interruptor. El fabricante se exime de toda responsabilidad en caso de que se incumplan las normas de seguridad.

FUNCIONAMIENTO
¿CUÁNDO HAY QUE ENCENDER LA CAMPANA? Encienda la campana al menos un minuto antes de comenzar a cocinar para transportar los humos y vapores hacia la superficie de aspiración. Cuando finalice la cocción, deje en funcionamiento la campana hasta que se aspiren todos los vapores y los olores; con la función Temporizador, es posible configurar el apagado automático de la campana después de 15 minutos de funcionamiento.
¿QUÉ VELOCIDAD SELECCIONAR? I velocidad: mantiene el aire limpio con bajos consumos de energía eléctrica. II velocidad: condiciones normales de uso. III velocidad: presencia de olores fuertes y de vapores. IV velocidad: eliminación rápida de olores y vapores.
Con el fin de reducir el impacto medioambiental, se sugiere ajustar siempre la velocidad mínima adecuada para el nivel de aspiración requerido.
¿CUÁNDO LAVAR O CAMBIAR LOS FILTROS? Los filtros metálicos deben lavarse cada 30 horas de uso. Para más detalles, consulte el cap. “MANTENIMIENTO”.
PANEL DE MANDOS ELECTRÓNICO

DESCARGA DE HUMOS
CAMPANA DE EVACUACIÓN EXTERNA (EXTRACTORA)
En esta versión, los humos y vapores son canalizados hacia el ambiente exterior a través del tubo de descarga. Para ello, el racor de salida de la campana debe conectarse. mediante un tubo, a una salida externa.
El tubo de salida debe tener: · un diámetro no inferior al del racor de la campana. · una ligera inclinación hacia abajo (caída) en los tramos horizontales para evi-
tar que la condensación fluya hacia el motor. · el número mínimo indispensable de codos.
· La longitud mínima indispensable para evitar vibraciones y reducir la capacidad aspirante de la campana. Es necesario aislar la tubería si pasa a través de ambientes fríos. Para impedir retornos de aire desde el exterior, hay una válvula de no-retorno en presencia de motores con 800 m3/h o superiores.
Desviación para Alemania: cuando la campana de cocina y los equipos alimentados con energía diferentes de la eléctrica están funcionando simultáneamente, la presión negativa en el local no debe superar los 4 Pa (4 x 10-5 bares).
INSTRUCCIONES DE MONTAJE
parte reservada al personal cualificado
La campana puede instalarse en diferentes configuraciones. Las fases de montaje generales valen para todas las instalaciones, mientras que para la instalación específica deben seguirse las indicaciones precisas correspondientes.

Motor ON/OFF

Motor OFF Impulso largo: cambio de tono de la luz de 2700K – 5600K

Aumento de la velocidad de 1 a 4 La velocidad 4 se activa solo por algunos minutos, después de activa la velocidad 3.

Los led presentes en los botones indican las velocidades:
Velocidad 1
Velocidad 2

Reducción de la velocidad de 4 a 1

Velocidad 3
Velocidad 4 (led “+” intermitente)

Encendido / Apagado luz Impulso breve: encendido y apagado de la luz Impulso largo: regular la intensidad

TIMER (Led rojo intermitente) Apagado automático tras 15 min. La función se desactiva (Led rojo apagado) si: – Se presiona otra vez la tecla TIMER ( ). – Se presiona la tecla ON/OFF ( ).

Si el panel de mandos está totalmente inactivo, antes de contactar con el servicio de asistencia técnica, corte temporalmente (unos 5″) la alimentación eléctrica al electrodoméstico, en lo posible, a través del interruptor general, para restablecer el funcionamiento normal. Si este procedimiento no resulta eficaz, póngase en contacto con el servicio de asistencia técnica.

28

ESPAÑOL

USO DEL RADIOMANDO (OPCIONAL)
¡ADVERTENCIAS!: Coloque la campana lejos de fuentes de ondas electromagnéticas (p. ej. hornos-microondas) que pudieran interferir con el radiomando y, por lo tanto, con la electrónica de la campana. La distancia máxima de funcionamiento es de 5 metros; dicha distancia podría ser menor si hay interferencias electromagnéticas. Radiomando con frecuencia de 433,92 MHz. El radiomando se compone de dos partes: – la unidad receptora integrada en la campana; – la unidad transmisora mostrada en la figura.
DESCRIPCIÓN DE LOS MANDOS DE LA TRANSMISORA
UP Puesta en marcha del motor e incremento de la velocidad de 1 a 4. La cuarta velocidad solo está activa durante unos minutos.
DOWN Disminución de la velocidad y apagado del motor.
Encendido / Apagado luz Impulso breve: encendido y apagado de la luz Impulso largo: regular la intensidad
TIMER ON: Apagado automático del motor tras 15 minutos. La función se desactiva automáticamente si se apaga el motor (botón ).
Transmisión de mando activa
PROCEDIMIENTO DE ACTIVACIÓN Antes de utilizar el radiomando, realice el siguiente procedimiento interviniendo en el panel de mandos de la campana: · Presione simultáneamente los botones LUZ ( ) y TIMER ( ) hasta que todos
los led empiecen a parpadear. · Suelte los dos botones y vuelva a presionar el botón LUZ ( ) hasta que todos
los led se enciendan. · Suelte el botón LUZ ( ): ahora la receptora está activa. El procedimiento sirve también para desactivar la unidad receptora.
CAMBIO DEL CÓDIGO DEL RADIOMANDO Si hay interferencias electromagnéticas o más de un radiomando en las proximidades, se puede generar un nuevo código siguiendo el siguiente procedimiento:
1) – GENERAR UN NUEVO CÓDIGO El procedimiento debe realizarse en el radiomando.
· Presione simultáneamente los botones LUZ y TIMER hasta que la pantalla empiece a parpadear.
· Presione el botón DOWN del radiomando: la memorización del nuevo código se confirma a través de 3 intermitencias breves de la pantalla. El nuevo código anula y sustituye el código de fábrica.
2) – ASOCIACIÓN DEL RADIOMANDO A LA CAMPANA MEDIANTE PANEL DE MANDOS
presione el botón TIMER ( ) del panel de mandos de la campana durante 2 segundos: El led se enciende. presione un botón cualquiera del radiomando en 5 segundos.
RESTABLECIMIENTO DEL CÓDIGO DE FÁBRICA
el procedimiento debe efectuarse en caso de cesión de la campana.
· Presione simultáneamente los botones UP y DOWN del radiomando durante más de 5 segundos: el restablecimiento efectivo se confirma a través de tres intermitencias breves de la pantalla.
· Asocie la campana con el radiomando tal como se describe en el punto 2.

MANTENIMIENTO
Antes de realizar cualquier tipo de limpieza o de mantenimiento, desconecte el equipo desenchufándolo o usando el interruptor general. No deben utilizarse detergentes que contengan sustancias abrasivas, ácidas o corrosivas ni paños con superficies rugosas. Un mantenimiento constante asegura un buen funcionamiento y un óptimo rendimiento a lo largo del tiempo. Preste especial atención a los filtros metálicos antigrasa: la limpieza frecuente de los filtros y de sus soportes asegura que en la campana no se acumulen grasas inflamables.
LIMPIEZA DE LAS SUPERFICIES EXTERNAS
Se recomienda limpiar las superficies externas de la campana al menos cada 15 días, para evitar que las sustancias aceitosas o grasosas puedan dañarlas. Para limpiar la campana, fabricada en acero inoxidable cepillado, el fabricante recomienda el uso de las toallitas “Magic Steel”. Como alternativa, y para todos los otros tipos de superficies, la limpieza de la campana se realiza con un paño húmedo ligeramente embebido en detergente líquido neutro o alcohol desnaturalizado. Termine la limpieza enjuagando bien y secando con paños suaves.
No utilice demasiada agua cerca del panel de mandos y de los dispositivos de iluminación, para evitar que la humedad alcance partes electrónicas.
La limpieza de los paneles de vidrio debe efectuarse únicamente con detergentes específicos no corrosivos o abrasivos y con un paño suave. El fabricante se exime de toda responsabilidad en caso de que se incumplan dichas instrucciones.
LIMPIEZA DE LAS SUPERFICIES INTERNAS
Se prohíbe limpiar las partes eléctricas o las partes del motor situadas dentro de la campana con líquidos o solventes. Para las partes metálicas internas, consulte el apartado anterior.
FILTROS METÁLICOS ANTIGRASA
Se aconseja lavar frecuentemente los filtros metálicos (al menos cada mes) dejándolos en remojo durante 1 hora en agua hirviendo con detergente para platos, evitando doblarlos. No use detergentes corrosivos, ácidos o alcalinos. Enjuáguelos con cuidado y espere a que estén secos para volver a montarlos. Es posible lavarlos en el lavavajillas. Para extraer y montar los filtros metálicos, consulte las instrucciones de montaje.
ILUMINACIÓN
La campana cuenta con iluminación de led de elevada eficiencia, un bajo consumo y una vida útil prolongada, en condiciones de uso normales. En caso de rotura, póngase en contacto con el Vendedor o con un Centro de Asistencia Técnica autorizado para la reparación.
BANDEJA DE RECOGIDA DEL ACEITE
Se recomienda limpiar la bandeja cada 15 días. No use detergentes corrosivos, ácidos ni alcalinos. Para una limpieza más profunda, quite la bandeja de recogida del aceite (consulte las instrucciones) y lávela con agua caliente y detergente para platos. Enjuáguela con cuidado y espere a que esté bien seca para volver a montarla.
No lave la bandeja de recogida de aceite en el lavavajillas.

29

ELIMINACIÓN AL FINAL DE LA VIDA ÚTIL
El símbolo del contenedor tachado que se encuentra en su equipo indica que el producto es un RAEE, es decir, un “Residuo de Aparatos Eléctricos y Electrónicos” y, por tanto, no se puede eliminar en la basura indiferenciada (o sea, junto con los “residuos urbanos mixtos”), sino que se tiene que eliminar por separado siguiendo las operaciones correspondientes para su reciclaje, o someterse a un tratamiento específico para eliminar de forma segura las sustancias dañinas para el medio ambiente y extraer las materias primas que se pueden reciclar. La eliminación correcta de este producto contribuye a salvar importantes recursos y evitar potenciales efectos negativos para la salud humana y para el medio ambiente, que podrían ser causados por una eliminación inapropiada de los residuos. Por favor, póngase en contacto con las autoridades locales para obtener mayor información acerca del punto de eliminación más cercano. Se podrían aplicar sanciones por la eliminación incorrecta de estos residuos, según la legislación nacional. INFORMACIÓN ACERCA DE LA ELIMINACIÓN EN LOS PAÍSES DE LA UNIÓN EUROPEA La directiva comunitaria sobre los equipos RAEE ha sido acatada de forma diversa en cada país, por tanto, si quiere eliminar este equipo, le sugerimos ponerse en contacto con las autoridades locales o el revendedor para obtener información sobre el método de eliminación correcto. INFORMACIÓN ACERCA DE LA ELIMINACIÓN EN LOS PAÍSES QUE NO PERTENECEN A LA UNIÓN EUROPEA El símbolo del contenedor tachado es válido solo en la Unión Europea: si quiere eliminar este equipo en otros países, le sugerimos que se ponga en contacto con las autoridades locales o el revendedor para obtener información sobre el método de eliminación correcto.
¡ATENCIÓN!
El fabricante se reserva el derecho a realizar cualquier cambio a los equipos en cualquier momento y sin previo aviso. La impresión, traducción y reproducción de este manual, incluso parcial, se deben realizar con la autorización del fabricante. La información técnica, las representaciones gráficas y las indicaciones presentes en este manual son indicativas y no se pueden divulgar. El idioma original del manual es el italiano, y el fabricante se exime de toda responsabilidad por posibles daños de transcripción o traducción.
30

. , : . , . . , , , , , / , . , . , . ; . . (, ) . (, ), , . , ( . 2). , , . , (, ..).

, , –
, ; . , , . , , . . . , .
, . , (, ..). , . : , ( ), – . . ,

31

– . (AS/NZS 60335.2.31:2013/A4:2020).

, , . , , , , . , . , , , . / , . , . , . .

, . , . , , (, ) . , ( ) 1,5 . : . . . ; , . . , . , , . , .

, , . , , , , , . 8- , , , , , . . , , .

(, , ..), , , , .

, . ” “.

, .

. , , 65 (25,6”). , EN60335-2-31,

32

, . , . , (, ..).

( )
. , : , . . . , , : · , ; · (. ); · 70 °C; · ; · , , .
: · :
“” . : – , . . · , , III . .
– .
.

()
. .
: · . · () –
. · – . ·
. , . , 8003/ .
: , , , 4 (4 x 10-5 ).

. ; , .

? . . 15 .
? I : . II : . III : . IV : .
, .
? 30 . . “”.

/

: 2700K-5600K

1 4 4 , 3- .

:
1
2

4 1

( “+” )

3 4

/ : :

( ) 15 . ( ), : – ( ). – / ( ).

, ( 5 ) , , . , .

33

()
!: (, ), , , . , , 5 ; . 433,92 . : – , ; – , .

. .
.
/ : :
: 15 . ( )

, : · ( ) ( )
, . · , ( )
, . · ( ): . .
, :
1) – .
· ( ) ( ) , .
· : 3- . .
2) –
( ) 2 : . 5 .

. · –
5 : . · , 2.

, . , , , . . , .

15 . ”Magic Steel”. , . .
.
. .

. .

( ) 1 , . , . , , . . .

, . .

34

15 . , . (. ) . , , .
.

, RAEE, ” ” ( ” “), , , , , . , . . .
(RAEE) , .
. , .
!
. , , , , . , , , . , .
35

WSKAZÓWKI DOTYCZCE BEZPIECZESTWA ORAZ OSTRZEENIA

nia; powinna by równie zgodna z europejskimi przepisami w zakresie zaklóce radiowych.

Prace instalacyjne powinny by wykonywane przez kompetentnych i wykwalifikowanych instalatorów, jak wskazano w niniejszej instrukcji i zgodnie z obowizujcymi przepisami. Jeli przewód zasilajcy lub inne czci s uszkodzone, NIE naley uywa okapu: odlczy okap od zasilania i skontaktowa si ze sprzedawc lub autoryzowanym centrum obslugi technicznej w celu naprawy. Nie naley zmienia struktury elektrycznej, mechanicznej i funkcjonalnej urzdzenia. Nie wolno podejmowa samodzielnych prób naprawy lub wymiany; wszystkie operacje wykonywane przez osoby niekompetentne i niewykwalifikowane mog spowodowa szkody, nawet bardzo powane, dla mienia i/lub osób, które nie s objte gwarancj producenta. OSTRZEENIA DLA INSTALATORA

Przed zainstalowaniem okapu naley sprawdzi, czy napicie sieciowe jest zgodne z danymi na tabliczce wewntrz okapu. Po zainstalowaniu urzdzenia, gniazdko wykorzystywane do podlczenia elektrycznego powinno by latwo dostpne; jeli nie jest to moliwe, naley przewidzie wylcznik glówny, aby w razie koniecznoci móc odlczy okap. Wszelkie modyfikacje w instalacji elektrycznej powinny by wykonywane wylcznie przez wykwalifikowanego elektryka. W przypadku awarii urzdzenia, nie naley podejmowa samodzielnych prób jego naprawy, lecz skontaktowa si z dostawc lub autoryzowanym centrum obslugi technicznej.

BEZPIECZESTWO TECHNICZNE Przed zainstalowaniem okapu naley sprawdzi integralno i funkcjonalno wszystkich jego czci; w przypadku zauwaenia jakich-
kolwiek nieprawidlowoci nie kontynuowa instalacji i skontaktowa si ze sprzedawc. Jeli znaleziono wad estetyczn, okapu NIE naley instalowa; naley go z powrotem umieci w oryginalnym opakowaniu i skontaktowa si ze sprzedawc. Po zainstalowaniu nie uwzgldnia si adnych reklamacji dotyczcych wad estetycznych. Podczas instalacji naley zawsze uywa rodków ochrony indywidualnej (np. butów ochronnych) i postpowa w sposób ostrony, z zachowaniem prawidlowych procedur. Zestaw do zamocowania (ruby i kolki) dostarczony z okapem powinno si wykorzysta wylcznie do montau na cianach murowanych; jeli okap ma by zamontowany na innego rodzaju cianach, naley rozway inne sposoby montau, uwzgldniajc wytrzymalo ciany oraz mas okapu (podane na str. 2). Naley pamita, e instalacja z systemami montaowymi innymi ni dostarczone lub niezgodnymi moe spowodowa uszkodzenia natury elektrycznej i mechanicznej. Nie instalowa okapu na zewntrz i nie wystawia go na dzialanie czynników atmosferycznych (deszcz, wiatr itd.) BEZPIECZESTWO ELEKTRYCZNE
Instalacja elektryczna, do której podlczony jest okap, powinna by zgodna z przepisami oraz posiada uziemienie, zgodnie z przepisami dotyczcymi bezpieczestwa w kraju uytkowa-

Podczas instalowania okapu naley odlczy urzdzenie, wyjmujc wtyczk lub za pomoc wylcznika glównego. BEZPIECZESTWO ODPROWADZANIA DYMU Nie przylcza urzdzenia do kanalów dymowych/spalinowych (kotly, kominki itp.). Przed instalacj okapu naley si upewni, e przestrzegane s wszystkie przepisy dotyczce odprowadzania zuytego powietrza poza pomieszczenie. Odchylenie dla Australii i Nowej Zelandii: Okapy kuchenne i inne wycigi oparów kuchennych mog negatywnie wplywa na bezpieczne dzialanie urzdze spalajcych gaz lub inne paliwa (równie tych znajdujcych si w innych pomieszczeniach) z powodu przeplywu wstecznego gazów spalinowych. Te gazy mog potencjalnie spowodowa zatrucie tlenkiem wgla. Po zainstalowaniu okapu kuchennego lub innego wycigu oparów kuchennych, kompetentna osoba powinna przetestowa dzialanie urzdze na gaz plynny w celu upewnienia si, e nie wystpuje przeplyw wsteczny spalin. (AS/NZS 60335.2.31:2013/A4:2020). OSTRZEENIA DLA UYTKOWNIKA Niniejsze ostrzeenia zostaj podane w celu zapewnienia bezpieczestwa zarówno Pastwa jak i innych osób. Przed uytkowaniem urzdzenia oraz przed jego czyszczeniem naley zatem przeczyta t instrukcj w caloci. Producent nie ponosi adnej odpowiedzialnoci za jakiekolwiek szkody/obraenia, które mog zosta spowodowane u ludzi, zwierzt domowych lub w mieniu, w sposób bezporedni lub poredni, w wy-

36

POLSKI

niku nieprzestrzegania instrukcji bezpieczestwa wskazanych w tej broszurze. Zachowanie niniejszej instrukcji obslugi razem z urzdzeniem jest bardzo wane w celach wszelkiej przyszlej lektury. Gdyby urzdzenie zostalo sprzedane lub przeniesiona zostala jego wlasno na strony trzecie, naley upewni si, e instrukcja zostala przekazana razem z nim, aby nowy uytkownik mógl zapozna si z funkcjonowaniem okapu i danymi ostrzeeniami. Po zainstalowaniu okapu ze stali nierdzewnej naley go wyczyci, aby usun pozostaloci kleju po folii ochronnej oraz ewentualne tluste plamy; zanieczyszczenia te, jeli nie zostan usunite, mog doprowadzi do nieodwracalnego uszkodzenia powierzchni okapu. W celu wykonania tej czynnoci, producent zaleca, aby uy chusteczek znajdujcych si w wyposaeniu, dostpnymi równie w ofercie handlowej. Stosowa wylcznie oryginalne czci zamienne. PRZEZNACZENIE Urzdzenie jest przeznaczone wylcznie do zasysania oparów powstajcych podczas gotowania ywnoci w gospodarstwie domowym, z wylczeniem przypadków uytkowania do celów profesjonalnych. Kade inne uycie jest niewlaciwe, moe spowodowa szkody/obraenia u ludzi, zwierzt oraz w mieniu, i zwalnia Producenta z jakiejkolwiek odpowiedzialnoci.

Nie zapala swobodnych plomieni pod okapem. Nie przygotowywa ywnoci z wykorzystaniem plomieni pod okapem. Nigdy nie naley uywa okapu bez metalowych filtrów przeciwtluszczowych; tluszcz i brud w tym przypadku osadzilby si na urzdzeniu pogarszajc stan jego dzialania. Dostpne czci okapu mog by nagrzane, gdy s stosowane w polczeniu z urzdzeniami do gotowania. Nie czyci czci okapu, gdy s jeszcze gorce. Jeli czyszczenie nie jest przeprowadzane zgodnie z procedurami i z produktami wymienionymi w niniejszej instrukcji, moe wystpi zagroenie poarowe. Gdy urzdzenie nie jest uywane przez dluszy czas, wylczy glówny wylcznik.
W przypadku jednoczesnego korzystania z innych urzdze (kotly, piece, kominki itd.) zasilanych gazem lub innymi paliwami, naley zapewni odpowiedni wentylacj w pomieszczeniu, w którym nastpuje zasysanie dymu, zgodnie z obowizujcymi normami.
MONTA
cz zastrzeona wylcznie dla personelu wykwalifikowanego
Przed zainstalowaniem okapu naley uwanie przeczyta rozdz. “WSKAZÓWKI DOTYCZCE BEZPIECZESTWA ORAZ OSTRZEENIA”.

Urzdzenie nie moe by uywane przez dzieci w wieku poniej 8 lat oraz osoby o ograniczonej sprawnoci fizycznej, sensorycznej lub psychicznej lub niemajcych dowiadczenia lub wymaganej wiedzy, chyba e odbdzie si to pod nadzorem lub gdy otrzymaly instrukcje odnoszce si do zapewnienia bezpiecznej pracy i zrozumienia zwizanego z nim niebezpieczestwa. Dzieci nie powinny bawi si urzdzeniem. Czynnoci czyszczenia i konserwacji, bdce obowizkiem uytkownika, nie powinny by wykonywane przez dzieci bez zapewnienia odpowiedniego nadzoru.

CECHY TECHNICZNE
Dane techniczne urzdzenia znajduj si na etykietach umieszczonych wewntrz okapu.
UMIESZCZANIE W POZYCJI
Minimalna odleglo midzy najwysz czci urzdzenia do gotowania a najnisz czci okapu kuchennego zostala wskazana w instrukcji montau. Z zasady, gdy okap kuchenny znajduje si na kuchence gazowej, odleglo ta powinna wynosi co najmniej 65 cm (25,6″). W kadym razie, na podstawie normy EN60335-2-31, minimaln odleglo midzy plaszczyzn kuchenki a doln czci okapu mona zmniejszy do wysokoci wskazanej w instrukcji montau. Jeeli instrukcje kuchenki gazowej wskazuj wiksz odleglo, naley j uwzgldni. Nie instalowa okapu na zewntrz i nie wystawia go na dzialanie czynników atmosferycznych (deszcz, wiatr itd.)

INSTRUKCJA UYTKOWANIA I CZYSZCZENIA Przed przystpieniem do czyszczenia lub konserwacji, odlczy urzdzenie wyjmujc wtyczk lub glównym wylcznikiem.
Nie naley uywa okapu z mokrymi rkami lub boso. Gdy nie korzysta si z urzdzenia naley zawsze sprawdzi, czy wszystkie czci elektryczne (wiatla, wycig) s wylczone. Maksymalna calkowita masa ewentualnych przedmiotów postawionych lub zawieszonych (gdzie przewidziano) na okapie nie moe przekroczy 1,5 kg. Podczas zastosowania frytkownic sprawdza: przegrzany olej moe si zapali.

PODLCZENIE ELEKTRYCZNE
(cz zastrzeona wylcznie dla wykwalifikowanych pracowników)
Przed wykonaniem wszelkiej czynnoci na okapie naley odlczy urzdzenie od sieci elektrycznej. Upewni si, e nie istnieje ryzyko odlczenia lub przecicia przewodów elektrycznych wewntrz okapu: w przeciwnym razie skontaktowa si z najbliszym centrum obslugi technicznej. Zwróci si do wykwalifikowanego personelu, aby podlczyl kable elektryczne. Podlczenie naley wykona zgodnie z obowizujcymi przepisami. Przed podlczeniem okapu do sieci elektrycznej naley sprawdzi, czy: · napicie sieciowe jest zgodne z danymi na tabliczce wewntrz okapu; · instalacja elektryczna jest zgodna z norm i moe wytrzyma obcienie (patrz dane techniczne wewntrz okapu); · wtyczka i przewód zasilajcy nie s naraone na kontakt z temperaturami przekraczajcymi 70°C; · instalacja zasilajca posiada sprawne i prawidlowe uziemienie zgodnie z obowizujcymi przepisami;

37

· gniazdko wykorzystywane do podlczenia jest latwo dostpne po zamontowaniu okapu.
W przypadku: · urzdzenia wyposaonego w przewód bez wtyczki: naley uywa wtyczki
typu znormalizowanego. Przewody powinny by podlczone w nastpujcy sposób: ólto-zielony do uziemienia, niebieski do zacisku neutralnego i brzowy do fazy. Wtyczka powinna by podlczona do odpowiedniego gniazda bezpieczestwa. · urzdzenia stalego nieposiadajcego przewodu zasilajcego i wtyczki lub innego przyrzdu zapewniajcego odlczenie od sieci i posiadajcego odleglo rozwarcia styków, która umoliwia calkowite odlczenie w warunkach nadnapicia kategorii III. Tego typu urzdzenia odlczajce powinny zosta przewidziane w sieci zasilania, zgodnie z zasadami instalacji.
Przewód uziemiajcy ólto-zielony nie moe by przedzielony wylcznikiem. Producent uchyla si od wszelkiej odpowiedzialnoci w razie braku zastosowania si do zasad dotyczcych bezpieczestwa.
ODPROWADZANIE DYMU
OKAP Z USUWANIEM NA ZEWNTRZ (WYCIGOWY)
W tej wersji opary i dym s odprowadzane na zewntrz przez rur spustow. W tym celu zlcze wylotowe okapu powinno by podlczone za pomoc rury do wylotu zewntrznego.

FUNKCJONOWANIE
KIEDY WLCZY OKAP? Okap naley wlczy co najmniej jedn minut przed rozpoczciem gotowania, aby przetransportowa dym i opary w kierunku powierzchni zasysania. Po zakoczeniu gotowania pozostawi okap do momentu, gdy wszystkie opary i zapachy zostan calkowicie zassane. Za pomoc funkcji timera mona ustawi automatyczne wylczenie okapu po 15 minutach pracy.
JAK PRDKO WYBRA? I prdko: zapewnia oczyszczone powietrze przy niskim poborze energii elektrycznej. II prdko: normalne warunki uytkowania. III prdko: w przypadku obecnoci silnych zapachów i oparów. IV prdko: szybkie usuwanie zapachów i oparów.
W celu zmniejszenia negatywnego wplywu na rodowisko zaleca si zawsze ustawia minimaln prdko odpowiedni do wymaganego poziomu zasysania.
KIEDY OCZYCI LUB WYMIENI FILTRY? Filtry metalowe powinny by myte co 30 godzin uytkowania. W celu zapoznania si z innymi szczególami patrz rozdzial ,,KONSERWACJA”.
ZESTAW PRZYCISKÓW ELEKTRONICZNYCH

Rura wylotowa powinna posiada: · rednic nie mniejsz od zlcza okapu. · lekkie nachylenie w dól (spadek) na odcinkach poziomych w celu uniknicia
cofania skroplin do silnika. · ograniczon do minimum liczb zagi.
· Minimaln niezbdn dlugo pozwalajc unikn drga oraz zmniejszenia wydajnoci zasysania okapu. Jeli rura przechodzi przez rodowisko o niskiej temperaturze, naley j zaizolowa. W celu uniknicia cofania powietrza z zewntrz, w przypadku silników o wydajnoci

Documents / Resources

falmec 110031206 Pro Plus Built-in Group [pdf] Instruction Manual
110031206 Pro Plus Built in Group, 110031206, Pro Plus Built in Group, Built in Group, in Group

References

Leave a comment

Your email address will not be published. Required fields are marked *