2515 Bypass Rd. Flemingsburg, KY 41041
606-845-7439
Instructions for Installation and Care of 2019 Polaris RZR Soft Rear Window
PO-19RZR-RW01

PO-19RZR-RW01 2019 Polaris RZR Soft Rear Window

Notice: Do not smoke inside the cab or expose the enclosure to direct flames. Cab is Flammable.

1. Be sure to read these instructions thoroughly before opening and installing the 2019 RZR Soft Rear Window.
2. Check over the parts included in the carton with the parts list shown below:
   Velcro Hook strips:

   “ “ “ “ “ “ “ “ Snap studs

   12 each 2 each 1 each 2 each

   3” long 5” long 24” long 26” long 6 each (1 extra)

    
3. Installation of your Soft Rear Window is quite simple. Take the 5 adhesive velcro strips provided and attach them to the roll cage around the perimeter facing the rear of the
   vehicle. Take the Soft Rear Window and attach it to the vehicle.
4.  Lastly, install the snaps along the bottom of the window. It works best to pop the snaps into the sockets first. Then push the screw end into the plastic to make an indention or mark. Then pull the snap out and screw it into the plastic.

Documents / Resources

FALCON RIDGE PO-19RZR-RW01 2019 Polaris RZR Soft Rear Window [pdf] Instruction Manual PO-19RZR-RW01, 2019 Polaris RZR Soft Rear Window, PO-19RZR-RW01 2019 Polaris RZR Soft Rear Window, Polaris RZR Soft Rear Window, RZR Soft Rear Window, Soft Rear Window

References

• User Manual