FAIMEE DVR 4K Dash Camera User Manual

FAIMEE-logoFAIMEE DVR 4K Dash Camera

FAIMEE-DVR-4K-Dash-Camera-product

Specification

Front Image Sensor 4K(3840*2160)
Rear Camera 2K(2304×1296)
Cabin Camera 2K(2304×1296)
Optional Language Multiple Language
TF Storage Card Slot Micro TF Card
Recording Resolution 4K+2K+2K
Photo Resolution 4K+2K+2K
Storage Compression Method H.264
Video Format TS
Picture Format JPEG
Storage Temperature -20℃~70℃
Operation Temperature 0℃~50℃
Operation Humidity 15-65%RH
Storage Card Capacity Max.Supports 256GB

What’s in the box

Object Name Quantity
Dash cam 1
Cigarette lighter wiring 1
Rear camera 1
Installing the pry plate 1
Wiping cloth 1
Electrostatic sticker 3
3M adhesive 2
Cable organizer clip 5
C10 class TF storage card 1

Customer Service

Dear customer
If you have any issues while using the product, please feel free to contact us before you return the product to us, we will serve you until you are satisfied.

  • Defective or damaged item?
  • Inaccurate description?
  • Missing parts or accessories?
  • Performance or quality not adequate?
  • Was the wrong item sent?

CONTACT US HERE

  • OUR EMAIL ADDRESS: service@faimee.net
  • Scan the code to extend the warrantyFAIMEE-DVR-4K-Dash-Camera-fig (1)
  • Typically we will reply to you in 24 hours on business days!

 Product Overview

This product uses a high-performance chip to provide high-definition video and seamless dynamic images. Please read this manual carefully before use and keep it properly. We hope this product will meet your needs and serve you for a long time!FAIMEE-DVR-4K-Dash-Camera-fig (2)

  1. Bracket
  2. Indicator light
  3. Rear Camera Connector
  4. Power Connector
  5. Inner Lens ( Triple)
  6. TF Card Slot
  7. Screen
  8. Microphone
  9. Front Camera

Function DescriptionsFAIMEE-DVR-4K-Dash-Camera-fig (3)

Menu Key:

  • In preview mode, with recording stopped, a short press to access the menu.
  • In preview mode, during recording, a short press to lock the video.

Direction Left Button

  • In preview mode (recording stopped), a short press to enter the playback menu.
  • In preview mode (recording in progress), a short press to turns audio recording on/off.
  • In menu/playback mode: navigates left and up.

Direction Right Button

  • In preview mode (recording stopped), a short press to switches lens modes.
  • In preview mode (recording in progress), a short press to take photos.
  • In menu/playback mode: navigates right and down.

OK Button

  • In preview mode, a short press to stops/starts recording. In menu/playback mode, a short press to confirms selections.

Power Button

  • A short press to turns the screen on/off; press and hold to power the device on/off.

Reset Hole

  • A short press to restart the device.

Function Introduction

Start the car engine, and the dash cam will automatically start and begin recording, entering the preview display interface.FAIMEE-DVR-4K-Dash-Camera-fig (4)

  1. Recording Icon:
    A flashing red light indicates normal recording; a flashing yellow light indicates emergency recording. The icon will be hidden when not in recording mode.
  2. Recording Time:
    The recording duration is displayed during normal recording and hidden when not in recording mode.
  3. Recording Resolution Display:
    Shows the current resolution.
  4. System Time:
    Displays the current RTC time, which can be set in the settings menu.
  5. GPS Icon:
    When a GPS module is connected, a red GPS icon will be displayed. If no icon appears, it indicates that GPS is disabled or not supported. Once the GPS receives a signal, the icon will turn green.
  6. Collision Detection Sensitivity Status
  7. Sound Recording:
    Indicates whether audio is being recorded during video recording.
  8. Memory Card
    Indicates the status of TF card insertion.
  9. Wi-Fi Icon:
    A white Wi-Fi icon is displayed when Wi-Fi is enabled; it turns green when Wi-Fi is connected.
  10. Wi-Fi Name and Password
  11. GPS Information Display

Interface IntroductionFAIMEE-DVR-4K-Dash-Camera-fig (5)

  • When the preview interface is in the recording-paused status, a short press on the menu button will access the main interface.
  • The main interface icons for “Dash Cam”, “System Settings”, and “File Explorer” allow users to select different items for setup and operation.

Settings Introduction

  • While in the preview interface and recording is stopped, short-press the M key (Menu Key) to access the main interface. Select “System Settings” and short press the OK key to access the “System Settings” menu interface.
  • Adjust the settings according to your requirements.
  • Note: All settings configured in the menu will be saved upon system shutdown.FAIMEE-DVR-4K-Dash-Camera-fig (6)
  1.  Video Resolution
    Change the recording resolution; currently available: 4K+2K+2K, 2K+2K+2K, 1080P+2K+2K. The default resolution is 4K+2K+2K.
  2. Loop Recording
    Indicates the recording time or the duration of each recording file, can be set to 1, 2, or 3 minutes; the default is 1 minute.
    Note: When the TF card is full, the recorder will overwrite the earliest recorded images or videos.
  3. Frequency
    Setting Options: 50Hz, 60Hz to suppress flickering caused by different lights; the default frequency is 60Hz.
  4. Collision Detection Sensitivity
    Setting options: Off, Low, Medium, High. Default is Medium.
  5. Parking Monitor
    Setting Options: Off, Low, Medium, High. When the car is turned off, if a collision occurs, the recorder will start and record a video, and then shut down. You can set 3 gears: low, medium, and high, nrepresenting the sensitivity of the device startup. The default is off. Attention: This function requires installing a hardwire kit.
  6. Time-Lapse Recording
    Setting Options: Off, 1fps/s, 2fps/s, 5fps/s. Off means no time-lapse recording; others indicate the frame rate of time-Lapse. Attention: This function requires installing a hardwire kit.
  7. Time-Lapse Recording Duration
    Setting Options: 12 hours, 24 hours, 48 hours, 72 hours. Indicates the duration of time-lapse after the car is turned off.
  8. Sound Recording
    Setting Options: Off, On. When on, the current environment sound will be recorded with the video; otherwise, there will be no sound.
  9. Time Stamp
    Setting Options: On, Off. When on, the recording will have a time watermark; when off, there will be no time watermark.
  10. WDR
    Setting Options: On, Off. When on, the light reception will be better, but the overall image will be darker.
  11. Internal Camera’s Preview:
    • No Change: Both the inside camera screen display and the recorded video file are the original image.
    • Preview Mirror: The inside camera screen displays a mirrored image, while the recorded video file remains the original image.
    • Record image: The inside camera screen shows the original image, while the recorded video file is a mirrored image.
    • Video Mirror: Both the inside camera screen display and the recorded video file are mirrored images.
    • Upside down: Both the inside camera screen display and the recorded video file are upside down.
    • Upside Down and Video Mirror: Both the inside camera screen display and the recorded video file are upside down, and left-right mirrored.
  12. Internal Recording:
    Settings: Off, On. When set to Off, the internal camera will not record.
  13. Rear Camera’s Preview
    • No Change: Both the rear camera screen display and the recorded video file are the original image.
    • Preview Mirror: The rear camera screen displays a mirrored image, while the recorded video file is the original image.
    • Record Image: The rear camera screen shows the original image, while the recorded video file is a mirrored image.
    • Video Mirror: Both the rear camera screen display and the recorded video file are mirrored images.
    • Upside down: Both the rear camera screen display and the recorded video file are upside down.
    • Upside Down and Video Mirror: Both the rear camera screen display and the recorded video file are upside down, and left-right mirrored.
  14. Volume Setting
    Setting Options: 0, 1, 2, 3, 4. Sets the volume of voice prompts.
  15. Pressing Sound
    Setting Options: Off, On. Turns the key sound on or off; when off, there will be no key sound.
  16. Screen Saver
    Setting Options: Off, 1 minute, 3 minutes. When off, the screen stays on, other options mean the screen will turn off after the set time.
  17. Speed Unit
    Displays the speed unit, km/h or mph.
  18. Time Zone
    24 global time zones, select as required.
  19. Language
    Sets the language for different countries.
  20. Satellite Information
    Displays the current GPS signal strength.
  21. WiFi Information & APP Download
    Manually turn WiFi on or off. Use a mobile browser to scan the QR code to download the APP.
  22. Date & Time Setting
    Manually set the system time of the dash cam.
  23. Format
    Format the TF card; it is recommended to format the card regularly.
  24. Version Information
    Displays the firmware version of the dash cam.
  25. Factory Reset
    Pops up a dialog to confirm restoring factory settings; confirming will reset all functions to the factory settings interface.
  26. Simulate USB drive
    The connection method is shown in the figure below: Connection method

LINK DIAGRAMFAIMEE-DVR-4K-Dash-Camera-fig (7)

Operation methodFAIMEE-DVR-4K-Dash-Camera-fig (8)

Connect the recorder to the computer using a Type-C data cable. After powering on the recorder, enter the system settings menu, select “Simulate USB drive,” and confirm. This will switch to USB drive mode, allowing the computer to read the recorder’s data.FAIMEE-DVR-4K-Dash-Camera-fig (9)

Note:
The computer USB port needs to provide 5V 3A power supply. Type C data cable needs lt must have data function. If you need this player to be able to review the video, the computer needs to support H.264 encoding. Otherwise, this player cannot review the video.
Help:
After-sales contact information. For any issues, you can send an email to: service@faimee.net

File Management Playback Interface

  • On the main interface, press the Menu key briefly to enter the system main interface. Select “File Explorer” to access the playback interface, where you can use the direction keys to choose different files, including: Video-Front, Video-Front-Lock, image-Front, Video-Interior, Video-Interior-Lock, Image-Interior, Video-back, Video-back-Lock, and image-back.FAIMEE-DVR-4K-Dash-Camera-fig (10)
  • Once in the interface, you can select the corresponding video or file to play.
  • Use the left/right direction keys to navigate to the previous or next file. Press the Menu key briefly to return to the previous level or exit playback.

APP Connection

Mobile APP Connection Introduction 

  1. Download APP
    Use a mobile browser to scan the QR code below to download the APP.FAIMEE-DVR-4K-Dash-Camera-fig (11)
  2. Connect Wi-Fi and Start APP
    Recorder Wi-Fi Name: SUNLINK-F9-XXXX Password: 12345678. After connecting, start the APP, click to add the recorder, and connect to the FAIMEE dash cam.
  3. APP Interface Introduction
    The interface may be different due to different operating systems, but it will still work.FAIMEE-DVR-4K-Dash-Camera-fig (12)

Photograph: Mode for taking pictures; tap the icon to take a photo. Video Recording: Mode for recording video; tap the icon to start recording;

  • Tap to check out the video files and image files.
  • Tap to enter the settings menu.
  • Tap to preview in full screen.

Check out files in the dash cam  to enter the main interface of the folder; press and hold any video files, and then you can edit the video file as below;FAIMEE-DVR-4K-Dash-Camera-fig (13)

  • FAIMEE-DVR-4K-Dash-Camera-fig (14)Select an image or video and tap this icon to download it to your phone
  • FAIMEE-DVR-4K-Dash-Camera-fig (15)Select an image or video and tap this icon to delete it. Cancel: tap to quit editing;

Tap to enter settings menu:FAIMEE-DVR-4K-Dash-Camera-fig (16)

  • Speaker Volume:
    Adjust the volume.
  • Loop Recording Frequency:
    Tap to select from 1/2/3 minutes.
  • Sound recording:
    Tap to turn on/off audio recording while recording video.
  • Video Resolution:
    Tap to select from 4K+2K+2K,2K+2K+2K,1080P+2K+2K.
  • Light Source Frequency:
    Tap to select from none or 50/60.
  • Speed Unit:
    Displays the speed unit, km/h or mph.
  • Collision Sensing:
    Off, Low, Medium, High. Default is Medium.
  • Time Watermark:
    On, Off. When on, the recording will have a time watermark, when off, there will be no time watermark.
  • Automatic Screen Off Time:
    The time is up to turn off the screen to avoid affecting driving, and the video will continue to be recorded and stored.
    Key Voice:
    Off, On. Turns the key sound on or off, when off, there will be no key sound.
  • Collision Detection Sensitivity for Parking:
    Off, Low, Medium, High. When the car is turned off, if a collision occurs, the recorder will start and record a video, and then shut down. You can set 3 gears: low, medium and high, representing the sensitivity of the device startup. The default is off. Attention: This function requires to install a hardwire kit.
  • Frame Rate of Time-lapse Video:
    Setting Options: Off, 1fps/s, 2fps/s, 5fps/s. Off means no time-lapse recording, others indicate the frame
    rate of time-Lapse. Attention: This function requires to install a hardwire kit.
  • Time-lapse Recording Duration:
    12 hours, 24 hours, 48 hours, 72 hours. Indicates the duration of time-lapse after the car is turned off.
  • Format SD Card:
    Format the TF card; it is recommended to format the card regularly.
  • Firmware Version:
    Displays the firmware version of the dash cam.
  • WiFi Name:
    SUNLINK-F9-XXXXXXXX
  • WiFi Password:
    12345678
  • Factory Reset:
    Pops up a dialog to confirm restoring factory settings; confirming will reset all functions to the factory settings interface.

 Installation GuidanceFAIMEE-DVR-4K-Dash-Camera-fig (17)

  1. Check out all the functions of the dash cam before installation. Do not pull too hard while hiding the cable. Please avoid incorrect connection/plug in and reverse connection.
  2. If the dash cam is unfunctional after wiring, please double-check whether a short circuit occurs or is caused by incorrect plug-in with wrong pins of the plug.
  3. Do not break or modify the original cable. lf cable breaks during installation, you must replace it with a brand new cable and install it before powering on.

DISCLAIMER

Please note that we are not responsible for any damage or loss caused byincorrect using of this product, or malfunctions that occur during use.

INFRINGEMENT

  • The video (audio files recorded by this product cannot be used without the permission of the rights owner, except for personal use.) About the built-in battery (Built-in or not according to model)

When you’re using the product with a battery.

  • You need to obey the rules below:
    • Do not modify or dismantle the product.
    • Do not heat or put the product into fire.
    • Do not put the product long-term under
    • scorching sun or high temperature environment. These behaviours may cause fire disasterand personalinjury

When youneed dispose built-in batterycomponents.

  • You need to obey the rules below:
    • Do not throw the battery in to fire or water, or heat it.
    • Do not put the battery under the scorching sun.
    • Attach insulating tape to the battery connector.
    • These behaviours may cause fire, explosion, battery liquid leak, and personal injury.

Wher you need to dispose of built-in battery components.

  • You also need to pay attention to:
    • It is not reachable for a child.
    • Seek help from a doctor if the battery liquid contacts one’s eyes.
    • These behaviours may cause fire, explosion, battery liquid leak, and personal injury.

When you install this product:

  • Please do not install this product on vehicles that do not fit DC12V/24V (with earth wire) electronic facility.
  • If you connect this product to a power port that is not DC12V/24V, it may cause fire and other functional failure
  • Do not install and wire in a location that blocks the operation of the airbag.
  • This may cause airbag malfunction and lead to a fatal accident.
  • Never use bolts or nuts for car safety parts (steering, brakes, tanks, etc.)
  • This may cause traffic accident.
  • Do not install in places that obstruct visibility or driving, or that may cause danger to passengers
  • We recommend that you ask for help from a professional for installation and wiring.

Incorrect installation or wiring can cause serious damage to the car and cause a traffic accident. Please do not install this product on vehiclesthat does not fit DC 12V/24V(with earth wire)electronic facility.

Please refer to this manual and install it correctly.

  • Before installation, please confirm the position of pipes, tanks, and wiring ofvehicle electricalfacilities.
  • Please be careful that do not to interfere with pipes, tanks, electrical wiring, etc., if you need to drill a hole for installation.
  • Be sure to use the included parts in the package or recommended parts.
  • Other parts may cause accidents, breakdowns, fires.
  • If it wraps around the steering wheel shift lever, brake pedal, etc., it maycause a traffic accident.
  • When wiring, please make sure that the cord does not get caught in moving parts such as the car body and seat.
  • Make sure that the cord does not get caught in movingparts such as the car body and seat.
  • Make sure to insulate the uncovered part of the cord with tape, etc.
  • Before installation, please connect the parts of this product and power on to check whether it works properly.
  • This makes it easier for you to request a refund or free replacement if you find defect or malfunction of this product.
  • Keep small parts such as screws and memory cards out of the reach of children or babies.
  • If babies swallow these parts, please seek help from a doctor immediately!
  • Please use the power cord with the cigarette lighter plug included in the package.
  • Make sure the power plug is well connected.
  • If not, it may cause product failure, fire,  and electric shock.
  • When pulling out the cigar lighter plug, please hold the plastic part and pull it out.
  • If not, it may cause product failure, fire, and electric shock.
  • Please unplug the product if not in use for a long time.
  • Depending on the vehicle model, the cigar lighter may not power off even if the engine is turned off. It may cause fire disaster or decrease battery life.
  • Please clear the cigar lighter plug periodically.
  • If there is dust on it, it may cause product failure.
  • Do not insert or remove the cigar lighter plug with wet hands.
  • This may lead to electric shock or product failure.

FCC Statement

Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and receiver.
  • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experienced radio/TV technician for help.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
RF Exposure Statement
To maintain compliance with FCC’s RF Exposure guidelines, this equipment should be installed and operated with a minimum distance of 20 cm from the radiator to your body. This device and its antenna (s) must not be co-located or operate in conjunction with any other antenna or transmitter.

Troubleshooting

  • Device not powering on: Ensure the power connector is securely plugged in. If the issue persists, try pressing the Reset Hole.
  • Recording issues: Check if a TF card is inserted and if it has sufficient space. Ensure the recording icon is visible and flashing.
  • GPS not working: Verify that the GPS module is connected. Ensure the vehicle is in an open area to receive a signal. The GPS icon should turn green once a signal is acquired.
  • Wi-Fi connection problems: Make sure Wi-Fi is enabled on the device. Check your phone’s Wi-Fi settings to ensure you are connecting to the correct network with the provided password.
  • Screen not responding: Try pressing the Reset Hole to restart the device.
  • Audio recording not working: During recording, press the Direction Left Button to toggle audio recording on/off. Check the Sound Recording icon on the preview display.

Documents / Resources

PDF thumbnailDVR 4K Dash Camera
User Manual · 2BDZK-F9, 2BDZKF9, FC2900, DVR 4K Dash Camera, DVR, 4K Dash Camera, Camera

References

Ask a Question

Use this section to ask about setup, compatibility, troubleshooting, or anything missing from this manual.

Ask a Question

Ask about setup, compatibility, troubleshooting, or anything missing from this manual. Name and email are optional.