LTECH C3 Remote Control Instruction Manual

LTECH C3 Remote Control

LED Color Controller Kit

• The controller housing is made from Covestro/Samsung V0-rated flame-retardant PC material;
• Features a soft-start gradual dimming function for greater visual comfort;
• Featuring a streamlined design and magnetic attachment, it is powered by two AAA batteries ;
• Utilizes 2.4 GHz RF wireless transmission for stable signals and strong interference resistance;
• Equipped with a dedicated on/off button for one-touch lighting control;
• Quickly adjust color using the color temperature and color touch sliders;
• Press the brightness button briefly to adjust the brightness across 11 levels; press and hold for continuous dimming;
• Pre-programmed with 2 scene modes for quick access, and custom scenes can be saved by holding down the button;
• A single controller can be paired with up to 10 remotes, and a single remote control can be used with multiple controllers;
• Supports synchronized dimming for controller groups

مشخصات فنی

کنترل از راه دور C3

کنترلر P3

ابعاد

نصب محصول

1. Open the battery compartment on the remote control and insert two AAA batteries, making sure to insert them with the correct polarity.
2. Peel off the protective film from the included double-sided tape, attach the magnetic mount to the wall, and press firmly to secure it (let it sit for 24 hours to ensure a secure bond before placing the remote control on it to prevent it from falling off).
3. Attach the remote control to the magnetic mount to complete the installation.

شرح ویژگی

• ON Button: Press briefly to turn on; press and hold for 2 seconds to pair.
• OFF Button: Press briefly to turn off.
• Color Touch Slider: Touch to change the RGB color of the lights.
• Brightness button: Press briefly to increase or decrease brightness; press and hold for continuous dimming. A brief press cycles through 11 brightness levels, while a press and hold allows for continuous dimming.
• Scene Button: Press briefly to recall a scene; press and hold for 2 seconds to save the current lighting state to a scene, and the indicator light will flash red twice.
• Indicator Light: The indicator light changes in sync with adjustments to color and brightness.

توجه:

1. If the indicator light on the remote control does not light up when a button is pressed, the batteries may be dead. Please replace the batteries promptly.
2. If no buttons are pressed for 6 seconds, the remote control will enter sleep mode. Press any button to wake it up.

نمودار سیم کشی

اقدامات احتیاطی نصب

For use with P-series controllers

Key pairing code

1. Short press the ID learning button on the controller. The load indicator will flash.
   Please complete the following steps within 10 seconds.
2. جفت کردن کنترل از راه دور:
   Press and hold the ON button on the remote control for 2 seconds.
   The remote control indicator light will flash rapidly three times and then turn off.
   If the color temperature slider or color slider changes when touched, the learning process was successful.

Power-on code pairing

1. After the controller has been powered off and then powered back on, please complete the following steps within 10 seconds.
2. جفت کردن کنترل از راه دور:
   Press and hold the ON button on the remote control for 2 seconds. The remote control’s indicator light will flash rapidly three times and then turn off, and you will feel a change when touching the slider, indicating that the programming was successful.

توجه: A single controller can pair with up to 10pcs remote controls. If more than 10pcs remote controls are paired, the ID code of the first remote control will be automatically deleted.

پاک کردن کد

To delete all remote controls:
Press and hold the controller ID learning button for 6 seconds. The controller load light will flash 4 times quickly and then stay on, indicating successful code clearing.

Use the Remote Controls Together

Code Pairing (assuming B learns from A)

1. Press and hold the ON and OFF buttons on the remote control simultaneously until the indicator light stays on, then release them.
2. Within 5 seconds, press any button on Remote A. The indicator light on Remote B will flash twice rapidly and then turn off, indicating that the pairing was successful.

*Assuming Remote Control A has already been paired with the controller, if you program Remote Control B to mimic Remote Control A, Remote Control B can be used to control the system directly without needing to be paired with the controller; *Only remotes of the same model can be programmed to mimic each other

پاک کردن کد

Press and hold the S1 and S2 buttons on the B remote control simultaneously for about 10 seconds; when the indicator light flashes three times, the programmed remote control code will be cleared.

حمل و نقل و ذخیره سازی

حمل و نقل

محصولات را می توان از طریق وسایل نقلیه، قایق و هواپیما ارسال کرد.
During transportation, products should be protected from rain and sun. Please avoid severe shock and vibration during the loading
and unloading process.

ذخیره سازی
شرایط نگهداری باید با استانداردهای محیطی کلاس I مطابقت داشته باشد. محصولاتی که بیش از شش ماه نگهداری شده اند توصیه می شود مجدداً بررسی شوند و تنها پس از تایید صلاحیت می توان از آنها استفاده کرد.

توجهات

• لطفا در یک محیط خشک داخلی استفاده کنید.
• When installing the battery, please connect the positive and negative terminals correctly. If the remote will not be used for a long period, take the battery out;
• When the remote distance is shortened and/or the remote doesn’t work frequently, please change the battery in time;
• لطفاً آن را با دقت بردارید و بگذارید تا از سقوطی که باعث آسیب می شود جلوگیری شود.
• در صورت بروز هرگونه نقص، لطفاً سعی نکنید خودتان محصولات را تعمیر کنید. در صورت داشتن هرگونه سؤال، لطفاً با تأمین‌کنندگان خود تماس بگیرید.

این راهنما بدون اطلاع بیشتر ممکن است تغییر کند. عملکرد محصول به کالا بستگی دارد. لطفا در صورت داشتن هرگونه سوال با توزیع کنندگان رسمی ما تماس بگیرید.

توافق نامه ضمانت

• دوره های گارانتی از تاریخ تحویل: 5 سال.
• خدمات تعمیر یا تعویض رایگان برای مشکلات کیفیت در دوره های گارانتی ارائه می شود.

موارد گارانتی شامل موارد زیر است:

The following conditions are not within the guarantee range of free repair or replacement services:

• فراتر از دوره های گارانتی؛
• هرگونه آسیب مصنوعی ناشی از حجم بالاtage، اضافه بار، یا عملیات نامناسب.
• محصولات با آسیب فیزیکی شدید؛
• خسارات ناشی از بلایای طبیعی و فورس ماژور؛
• برچسب ها و بارکدهای گارانتی آسیب دیده اند.
• هیچ قراردادی توسط شرکت ما امضا نشده است.

1. The repair or replacement provided is the only remedy for customers. Our company is not liable for any incidental or consequential damage unless it is within the law.
2. شرکت ما حق دارد شرایط این ضمانت‌نامه را اصلاح یا تعدیل کند و ارائه کتبی آن ملاک خواهد بود.