Universal Remote Control (URC) manufactures remote controls and home automation systems, ranging from cable provider remotes to advanced smart home controllers.
کنترل از راه دور جهانی ، شرکت، معمولاً به عنوان شناخته میشود URC, is a global leader in automation and control systems. The company specializes in providing high-quality remote controls for residential and commercial applications.
While widely known for their subscription broadcast remotes provided by cable and satellite operators (such as the UR2-DTA and UR3-SR3 series), URC also designs sophisticated user interfaces for managing smart home devices, audio, video, and lighting. Their products are designed to streamline device operation through technologies like IR, RF, and IP control, offering users a unified experience for entertainment and environmental management.
جدیدترین کتابچههای راهنما از manuals+ برای این برند طراحی و ساخته شده است.
سوالات متداول در مورد دفترچههای راهنما، ثبت نام و پشتیبانی این برند.
Turn on the component you want to program. Press and hold the [DEVICE] key for 5 seconds until the LED blinks once and stays on. Enter the one-digit code assigned to your brand from the Quick Set-up Code Table. The LED will blink twice to confirm the code is stored.
During setup mode, the LED light usually stays on for 20 seconds. If no button is pressed within that time, the light turns off and the remote exits setup mode. You will need to start the process over.
You can use the Auto-Search Method. Press the [DEVICE] and [SEL] buttons simultaneously for 3 seconds. Then, point the remote at the component and press [CH+] or [CH-] repeatedly until the device turns off. Press [DEVICE] again to save the code.
Press the [DEVICE] button and [SEL] simultaneously for 3 seconds. Then press the [INFO] button. Count the number of LED blinks to identify each digit of the 3-digit code (10 blinks represents the number 0).
Yes. By default, volume keys may control the DTA box. To lock volume to the TV: Press [SEL] and [DTA] simultaneously for 3 seconds, press [VOL+], then press the [TV] button. The LED will blink twice to confirm configuration.