BSEED W-SD Multi Function Power Meter

عملکرد کلیدی

معرفی محصول

The multi – functional Wlfl guide rail meter adopts a rail – type design, which is small in size, compact instructure and simple in installation; it uses an LCD display screen to display current, voltage, electricity, power,frequency and other electrical parameters, is convenient for users to acquire data and easy to operate. It hasgood anti – electromagnetic interference capabilities, meets various needs of power management, facilitates therealizationof terminal – intelligent power metering, and facilitates the retrofitting of power meters in the lateltransformation  of the lighting system. It is widely used in commercial squares, science and technology parksuniversities and other occasions where billing is required, It can also be jointly deployed with energyconsumption monitoring and energy management systems. its application scope includes property bilingmanagement, electricity metering, power demand – side management, energy management andenergy-saving analysis, Other low – voltage power systems, etc.

پارامترهای فنی

جلد رتبه بندی شدهtage	AC 220V/110v
جلد عملیاتیtagمحدوده	AC 80V-300V
فرکانس	50/60 هرتز
محدوده قدرت	۱-۱۰۰۰۰ کیلووات ساعت
محدوده زمانی	0-999 روز
ضریب قدرت	0-1.0 PF
محدوده دما	-40-150 درجه سانتیگراد
Overvoltage محدوده تنظیم	130-300 ولت
Undervoltage محدوده تنظیم	75-21 ov
Overcurrent setting range	1-63A
Overpower setting range	1-15KW
عایق دارای رتبه جلدtage	400 ولت
خروجی مخاطبین	1NO
عمر مکانیکی	10,000 بار
کلاس حفاظتی	lp30
ارتفاع	::,2000m
رطوبت	550%at40°C(non-condensing)

Function Introduction, Default Settings

گزینه ها	محدوده تنظیم	پارامترهای پیش فرض
Overvoltage حفاظت	230-300 ولت	270 ولت
Undervoltage حفاظت	110-21 ov	170 ولت
جریان اضافه حفاظت	0.1-63A	40A
حفاظت از اضافه بار	1-15KW	8. 8KW
انرژی الکتریکی حفاظت	۱-۱۰۰۰۰ کیلووات ساعت	99999 کیلووات ساعت
بیش از حد دما حفاظت	0-150 درجه (	85 درجه سانتی گراد
Number of closures	1-30 بار	5 بار
Closingtime	1-600 ثانیه	30 ثانیه
Electricityclearing	روشن/خاموش	خاموش
Timing clearing	روشن/خاموش	خاموش
Power-up operation	Close/open/hold	نگه دارید
Overvoltagedelay حفاظت	1-600 sec/off	خاموش
Undervoltagedelay حفاظت	1-600 sec/off	خاموش
Overcurrent delay حفاظت	1-600 sec/off	خاموش
Overloaddelay حفاظت	1-600 sec/off	خاموش
بیش از حد دما delayprotection	1-600 sec/off	خاموش

structural analysis

ابعاد

اندازه محصول

نمودار سیم کشی

Set function operation

Press the set key for 5 seconds to enter the settings page, give an example of the “Overvoltage Protection” setting, click thekey cursor to move to the “Overvoltage Protection” position, press the set key to select, press thekey to adjust to the required value, press the set to save after the adjustment is completed, and press the key to select other settings. If you do not need to set it, press thekey to move the cursor to the exit position, and then press set to return to the home page. The other settings can be the same as the “Overvoltage Protection” setting method.

Set function operation

برنامه Smart Life را بارگیری کنید or Graffiti APP Smart Connection
WIFI connection or reset operation method: Long press the wifi key 5-10s wifi indicator light will flash, turn on the phone Bluetooth, then open the Smart Life APP, click “+” in the upper right corner, select “Add Device”, wait for the device to scan out the device, click on the device to select the wifi name, enter the password to wait for the device to be added successfully.

اطلاعات بیشتر

اسناد / منابع

BSEED W-SD Multi Function Power Meter [pdfدفترچه راهنما wifi_1p_din_rail, W-SD Multi Function Power Meter, W-SD, Multi Function Power Meter, Function Power Meter, Power Meter, Meter

مراجع

• راهنمای کاربر