Streamlight 22060 120V/100V AC Charge Cord Instruction Manual

مقدمه

This manual provides essential instructions for the safe and effective use of your Streamlight 22060 120V/100V AC Charge Cord. This cord is designed to provide AC power for charging compatible Streamlight flashlights, specifically the Stinger, Stinger HP, and PolyStinger models. Please read this manual thoroughly before use and retain it for future reference.

اطلاعات ایمنی

اطلاعیه ایمنی مهم: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Always handle electrical products with care and follow all local safety regulations.

• Do not expose the charge cord to water or excessive moisture.
• Do not use the charge cord if it appears damaged.
• از ولتاژ پریز برق اطمینان حاصل کنیدtage matches the cord's specifications (120V/100V AC).
• دور از دسترس کودکان نگهداری شود.

محتویات بسته

بسته شما باید شامل موارد زیر باشد:

• Four (4) Streamlight 22060 120V/100V AC Charge Cords.

Image: A single Streamlight 22060 120V/100V AC Charge Cord, black in color, with the power adapter block and the charging connector visible.

Image: Four individual Streamlight 22060 120V/100V AC Charge Cords, illustrating the "Pack of 4" quantity.

راه اندازی

1. باز کردن بسته: Carefully remove the Streamlight 22060 AC Charge Cord from its packaging.
2. بازرسی کنید: Before use, visually inspect the cord and adapter for any signs of damage. Do not use if damaged.
3. اتصال به برق: Plug the AC adapter end of the charge cord into a standard 120V/100V AC wall outlet.
4. Connect to Charger Base: Insert the small connector end of the charge cord into the appropriate port on your compatible Streamlight flashlight charger base (e.g., for Stinger, Stinger HP, or PolyStinger models). Ensure a secure connection.

دستورالعمل های عملیاتی

Once the charge cord is properly set up and connected to your flashlight's charger base, you can proceed with charging your flashlight.

1. Ensure the charge cord is securely plugged into both the wall outlet and the flashlight charger base.
2. Place your compatible Streamlight flashlight (Stinger, Stinger HP, or PolyStinger) into its charger base.
3. The charging indicator on your flashlight or charger base should illuminate, indicating that charging has begun. Refer to your flashlight's specific manual for details on charging indicators.
4. Allow the flashlight to charge fully. Charging times vary by model and battery state.
5. Once charging is complete, remove the flashlight from the charger base.
6. When not in use, you may unplug the AC charge cord from the wall outlet.

This AC charge cord allows for convenient charging of your flashlight without needing to remove the battery from the flashlight itself.

تعمیر و نگهداری

To ensure the longevity and proper function of your Streamlight 22060 AC Charge Cord, follow these maintenance guidelines:

• تمیز کردن: Wipe the cord and adapter with a dry, soft cloth. Do not use liquid cleaners or immerse in water.
• ذخیره سازی: Store the charge cord in a cool, dry place away from direct sunlight and extreme temperatures. Avoid tightly coiling the cord to prevent damage.
• بازرسی: Periodically inspect the cord for cuts, fraying, or exposed wires. If any damage is observed, discontinue use immediately and replace the cord.

عیب یابی

مشخصات

گارانتی و پشتیبانی

For warranty information or technical support regarding your Streamlight 22060 AC Charge Cord, please contact Streamlight directly through their official webسایت یا کانال‌های خدمات مشتری. رسید خرید خود را به عنوان مدرک خرید نگه دارید.

You can visit the official Streamlight store for more information: Streamlight Store