Polibi Murphy Bed with Hydraulic Lift System and Foldable Cabinets User Manual

1. اطلاعات ایمنی

• ظرفیت وزنی: This Murphy bed is designed to support a maximum weight of 700 lbs. Do not exceed this limit to prevent damage or injury.
• مونتاژ: Assembly requires two adults. Ensure all components are securely fastened according to the assembly instructions. Improper assembly can lead to instability.
• نصب دیواری: The Murphy bed unit باید be securely anchored to a wall stud or appropriate structural support. Failure to properly anchor the unit can result in tipping and severe injury.
• ترخیص: Ensure adequate clearance around the bed when opening and closing to avoid obstruction or damage.
• کودکان و حیوانات خانگی: Keep children and pets away from the bed during operation to prevent pinching or other injuries.
• تشک: Use a mattress that complies with the recommended dimensions and weight for this unit. (Mattress sold separately).

2. محتویات بسته

Before beginning assembly, verify that all parts and hardware are present. Refer to the detailed parts list included in your packaging. If any items are missing or damaged, contact customer support immediately.

• Main Murphy Bed Frame Components
• مکانیزم بالابر هیدرولیکی
• Side Cabinet Components (2 units)
• Hardware Kit (screws, bolts, anchors, etc.)
• Assembly Tools (basic tools for home assembly are included)

3. راه اندازی و مونتاژ

Assembly of the Polibi Murphy Bed requires careful attention to detail and adherence to the provided step-by-step instructions. It is recommended to have two adults for assembly.

۲.۱ چک لیست قبل از مونتاژ

• یک فضای بزرگ برای مونتاژ آماده کنید.
• تمام اجزا را از بسته‌بندی خارج کرده و آنها را کنار هم قرار دهید و با لیست قطعات مقایسه کنید.
• Gather necessary tools (a screwdriver and possibly a drill for wall mounting may be helpful in addition to included tools).

۵.۲ مراحل مونتاژ (کلیات)view)

1. Assemble the Main Bed Frame: Follow the instructions to construct the primary bed frame structure.
2. Install Hydraulic Lift System: Carefully attach the hydraulic lift mechanisms to the bed frame and wall unit as directed. Ensure proper alignment for smooth operation.
3. کابینت‌های کناری را مونتاژ کنید: Construct the two foldable side cabinets.
4. Attach Cabinets to Main Unit: Securely attach the assembled side cabinets to the main Murphy bed unit.
5. نصب دیواری: This is a critical step. Position the assembled unit against the desired wall. Locate wall studs and use appropriate anchors and screws to firmly secure the unit to the wall. Do not skip this step.
6. بررسی های نهایی: Before use, ensure all bolts and screws are tightened. Test the opening and closing mechanism several times without a mattress to confirm smooth operation.

Image: Internal structure of the Polibi Murphy Bed frame and side cabinets during assembly.

تصویر: دقیق view of the hydraulic lift system, crucial for smooth bed operation.

4. دستورالعمل های عملیاتی

The Polibi Murphy Bed features an intuitive hydraulic lift system and foldable cabinets for efficient space utilization.

۶.۱ باز کردن تخت

1. Ensure the area in front of the bed is clear of obstructions.
2. Gently pull the bed handle downwards. The hydraulic lift system will assist in lowering the bed smoothly to the floor.
3. Once fully extended, ensure the support legs are securely in place.

Image: The Polibi Murphy Bed in its open position, ready for use.

۶.۲ بستن تخت

1. Remove all bedding and pillows from the bed surface.
2. Fold the support legs inward.
3. Gently lift the bed frame upwards using the handle. The hydraulic system will assist in lifting the bed smoothly and securely into its vertical, stored position.
4. Ensure the bed is fully latched or secured in the upright position.

Image: The Polibi Murphy Bed in its closed position, appearing as a wall unit.

4.3 Using the Foldable Push-Pull Cabinets

The dual side cabinets provide additional storage and can be extended or retracted as needed.

• برای باز کردن: Gently pull the cabinet handles outwards. The cabinets are on wheels for easy movement.
• بستن: Push the cabinets inwards until they are flush with the main unit.

Image: The side cabinets fully extended, showcasing their storage capacity.

5. تعمیر و نگهداری

Regular maintenance ensures the longevity and proper functioning of your Polibi Murphy Bed.

• تمیز کردن: سطوح را با نرم، دamp پارچه. از مواد شیمیایی قوی یا پاک‌کننده‌های ساینده که ممکن است به روکش آسیب بزنند، خودداری کنید.
• بررسی سخت افزار: Periodically check all screws, bolts, and connections to ensure they remain tight. Retighten if necessary.
• سیستم هیدرولیک: The hydraulic lift system is designed for long-term use and generally requires no special maintenance. If you notice any stiffness or unusual operation, contact customer support. Do not attempt to lubricate or disassemble the hydraulic cylinders yourself.
• Cabinet Wheels: Keep the cabinet wheels free of dust and debris to ensure smooth movement.

6 عیب یابی

If you encounter any issues with your Polibi Murphy Bed, refer to the following common troubleshooting steps:

• باز و بسته کردن تخت دشوار است:
  • Ensure no obstructions are blocking the bed's path.
  • Verify that the hydraulic lift system components are correctly installed and not damaged.
  • Check if the mattress weight is within the recommended range. An incorrect mattress can affect operation.
• Side cabinets do not slide smoothly:
  • Inspect the wheels for any debris or damage. Clean if necessary.
  • Ensure the cabinets are properly aligned on their tracks.
• واحد ناپایدار به نظر می‌رسد:
  • Re-check all assembly hardware for tightness.
  • Verify that the unit is securely anchored to the wall studs. This is crucial for stability.

If these steps do not resolve the issue, please contact Polibi customer support for further assistance.

7. مشخصات

Image: Dimensions of the Polibi Murphy Bed in the open position.

Image: Dimensions of the Polibi Murphy Bed in the closed position.

8. اطلاعات گارانتی

Specific warranty details for the Polibi Murphy Bed are not provided in this manual. Please refer to the warranty card included with your product packaging or visit the official Polibi webسایتی برای جدیدترین اطلاعات و شرایط گارانتی.

9. پشتیبانی مشتری

For any questions, assistance with assembly, troubleshooting, or to report missing/damaged parts, please contact Polibi customer support.

• اطلاعات تماس: Please refer to the contact details provided in your product packaging or on the official Polibi webسایت
• منابع آنلاین: Visit the Polibi store on Amazon for additional product information and support: فروشگاه پلیبی