VEVOR 8M0059686 Boat Throttle Control Box User Manual

1. اطلاعات ایمنی مهم

Read all instructions carefully before installation and operation. Failure to follow these instructions may result in property damage, serious injury, or death. Always ensure the ignition is off and all power is disconnected before performing any installation or maintenance.

• همیشه در هنگام نصب از تجهیزات حفاظت فردی مناسب استفاده کنید.
• مطمئن شوید که تمام اتصالات الکتریکی ایمن و عایق‌بندی مناسبی دارند تا از اتصال کوتاه جلوگیری شود.
• Verify correct cable routing to avoid interference with moving parts or sharp edges.
• Test all functions in a safe environment before full operation.
• اگر در مورد هر بخشی از نصب یا عملیات مطمئن نیستید، با یک تکنسین دریایی واجد شرایط مشورت کنید.

2. محصول تمام شدview

The VEVOR 8M0059686 Boat Throttle Control Box is a top-mounted remote control kit designed for Mercury PT 2-Stroke outboard motors. It features a durable construction with aluminum ADC2+ASA components and an ABS shell handle, engineered for reliable and smooth operation.

Figure 2.1: VEVOR Outboard Remote Control Box installed on a boat dashboard, showing its top-mount design, sturdy casing, ABS handle, and firm button.

ویژگی های کلیدی:

• ساخت و ساز بادوام: Made from aluminum ADC2+ASA and an ABS shell handle for resistance to cracking and robust performance.
• عملکرد صاف: Designed for precise control of shifting and throttle.
• Integrated Trim and Tilt Switch: Conveniently located on the control lever handle for easy adjustment of the outboard motor's position.
• Low-Temperature Operation Function: Adjusts the air-fuel mixture ratio for reliable engine starting and operation in cold weather.
• Long Control Cables: Includes a 1 ft/320 mm 3-pin harness and a 5.9 ft/1800 mm 2-pin harness for flexible installation.

3. محتویات بسته

مطمئن شوید که تمام موارد ذکر شده در زیر در بسته شما موجود است:

شکل 3.1: منفجر شد view of the VEVOR Outboard Remote Control Box and its components, including screws, nuts, sleeves, and mounting hardware.

• 1 x Outboard Remote Control Box
• 2 x M5*55 Round Head Screws
• ۴ عدد مهره قفلی M5
• 4 x M5 * 40 پیچ
• 4 عدد آستین لاستیکی
• Additional hardware may include: M4*8 Cross-Flat Head Screws, Flat Washers, M4*7 Cross-Round Head Screw, Plug, Insulated Terminal Sleeves, Terminal Connectors, Tie Holder, Cable Tie Holder, Cable Tie, Mounting Brackets, Decorative Cover, Decorative Seat, Rubber Buckle, and Instruction Manual.

4. دستورالعمل نصب

Proper installation is crucial for the safe and effective operation of your throttle control box. Follow these steps carefully:

1. آماده سازی: Before beginning installation, turn off the ignition, remove the key, and disconnect all power cables from the battery.
2. محل نصب: Select a suitable top-mount location on your boat's console or gunwale. Ensure there is sufficient clearance for the control lever's full range of motion and access for cable routing.
3. سوراخ های حفاری: Mark and drill the necessary mounting holes according to the provided template (if included) or the dimensions of the control box.
4. جعبه کنترل را محکم کنید: Position the control box and secure it using the provided M5*55 round head screws, M5 lock nuts, and M5*40 screws with rubber sleeves. Ensure the box is firmly attached.
5. اتصال کابل:
   • Connect the 1 ft/320 mm long harness with the 3-pin connector to the corresponding port on your Mercury outboard motor.
   • Connect the 5.9 ft/1800 mm long harness with the 2-pin connector for remote power supply setups.
   • Measure the required cable length carefully to ensure ample reach without excessive slack or tension.
6. مسیریابی کابل: Route all cables securely, avoiding sharp bends, pinch points, and areas where they could be damaged by moving parts or environmental factors. Use cable ties and holders as needed.
7. بررسی های نهایی: Once installed, re-connect power to the battery. Before starting the engine, manually check the movement of the control lever and ensure all connections are secure.

Figure 4.1: Illustration of the extra-long control cables, including the 3-pin plug (1.0 ft / 320 mm) and the 2-pin connector (5.9 ft / 1800 mm), designed for remote power supply setups.

5. دستورالعمل های عملیاتی

This section details the operation of your VEVOR throttle control box for optimal performance.

5.1 Shifting Gears and Throttle Control

Figure 5.1: Diagram showing the lever positions for Neutral, Forward, Reverse, and throttle engagement. The Free Accelerator Button is also indicated.

1. موقعیت خنثی: The control lever rests in the central, vertical position. To shift into gear, press the neutral release button located on the handle.
2. Forward Gear: From the neutral position, push the control lever forward approximately 35° to engage forward gear. Further pushing the lever forward will increase throttle.
3. دنده عقب: From the neutral position, pull the control lever back approximately 35° to engage reverse gear. Further pulling the lever back will increase throttle in reverse.
4. Free Accelerator (Warm-up): With the control lever in Neutral, push the free accelerator button (usually a small button on the side or front of the handle) to open the throttle without engaging a gear. This is used for starting and warming up the engine.

5.2 Power Trim and Tilt Switch

شکل 5.2: نمای نزدیک view of the power trim and tilt switch located on the control lever handle, showing "UP" and "DOWN" indicators.

The power trim and tilt switch is integrated into the control lever handle. Use this switch to adjust the stern engine's position:

• Press the "UP" button to raise the outboard motor.
• Press the "DOWN" button to lower the outboard motor.

This function is useful for cargo loading/unloading, navigating shallow waters, and preventing prolonged engine immersion when docked.

5.3 Low-Temperature Operation

Figure 5.3: Visual representation of the low-temperature air-fuel ratio adjustment feature, ensuring reliable engine starts and operation in cold conditions.

The control box is equipped with a low-temperature air-fuel ratio adjustment function. This feature automatically or manually (depending on the specific motor's capabilities) adjusts the fuel and air mixture ratio in cold weather, facilitating easier starting and reliable operation of the vessel in extreme temperatures.

6. تعمیر و نگهداری

Regular maintenance ensures the longevity and reliable performance of your VEVOR throttle control box.

• تمیز کردن: Periodically clean the exterior of the control box with a mild soap and water solution. Avoid abrasive cleaners or solvents that could damage the finish.
• روغن کاری: Inspect moving parts and pivot points for smooth operation. Apply marine-grade grease or lubricant as recommended by your outboard motor's manual to ensure smooth shifting and throttle control.
• بازرسی کابل: Regularly check control cables for signs of wear, fraying, or corrosion. Ensure they are properly routed and secured. Replace damaged cables immediately.
• اتصالات الکتریکی: Verify that all electrical connections are clean, tight, and free from corrosion. Apply dielectric grease to connections to prevent moisture ingress.
• عملکرد سوئیچ: Test the trim/tilt switch and neutral release button regularly to ensure they operate correctly.

7 عیب یابی

If you encounter issues with your throttle control box, refer to the following common troubleshooting steps:

If the problem persists after attempting these solutions, contact VEVOR customer support or a certified marine technician.

8. مشخصات

Detailed specifications for the VEVOR 8M0059686 Boat Throttle Control Box:

9. گارانتی و پشتیبانی

Specific warranty information and detailed support contacts are not provided in the product data. For warranty claims, technical assistance, or to purchase replacement parts, please refer to the official VEVOR webبه سایت مراجعه کنید یا مستقیماً با خدمات مشتریان آنها تماس بگیرید. رسید خرید خود را به عنوان مدرک خرید نگه دارید.