دفترچه راهنمای منبع تغذیه Sharkoon Rebel P10 850W ATX 3.1

1. مقدمه

This manual provides essential information for the safe and efficient use of your Sharkoon Rebel P10 850W ATX 3.1 Power Supply Unit (PSU). The Rebel P10 is designed to deliver reliable and efficient power to your personal computer, supporting the latest ATX 3.1 standard for compatibility with modern graphics cards. It features a quiet 120mm fan with a fluid dynamic bearing and flat cables to optimize airflow within your PC case.

2. اطلاعات ایمنی

Please read and understand all safety instructions before installing or operating the PSU. Failure to do so may result in personal injury or damage to your equipment.

• خطر برق: The PSU contains high voltagقطعات الکترونیکی. منبع تغذیه را باز نکنید.asinز. هیچ قطعه‌ای که توسط کاربر قابل تعمیر باشد در داخل وجود ندارد.
• نصب حرفه ای: Installation should be performed by a qualified technician or experienced user.
• تهویه: Ensure adequate ventilation around the PSU. Do not block the fan or ventilation openings.
• محیط زیست: Operate the PSU in a dry, well-ventilated environment, away from moisture, dust, and extreme temperatures.
• زمین کردن: Always connect the PSU to a grounded power outlet using the provided power cable.
• خاموش: Always disconnect the PSU from the mains power before performing any installation, maintenance, or troubleshooting.

3. محتویات بسته

بررسی کنید که آیا همه اقلام در بسته موجود است یا خیر:

• Sharkoon Rebel P10 850W ATX 3.1 Power Supply Unit
• کابل برق AC
• پیچ های نصب
• راهنمای کاربر (این سند)

4. راه اندازی و نصب

Follow these steps to install your Sharkoon Rebel P10 PSU into your computer system:

1. سیستم خود را آماده کنید: Ensure your computer is completely powered off and disconnected from the wall outlet. Open your PC case to access the PSU mounting area.
2. حذف PSU قدیمی (در صورت وجود): تمام کابل‌ها را از PSU قدیمی خود جدا کرده و آن را از کیس جدا کنید.
3. منبع تغذیه جدید را نصب کنید: Carefully place the Sharkoon Rebel P10 into the designated PSU bay in your PC case. Secure it with the provided mounting screws. Ensure the fan faces the correct direction for optimal airflow (typically facing downwards if your case has a bottom vent, or inwards if it's a top-mounted PSU).
   

   تصویر: اصلی view of the Sharkoon Rebel P10 850W Power Supply Unit. This image shows the primary casing and fan grill, illustrating the unit's compact design for easy installation into a PC chassis.
4. اتصال برق مادربرد: Connect the 24-pin ATX power connector to your motherboard's 24-pin socket. Ensure it clicks securely into place.
5. اتصال برق پردازنده: Connect the 4+4-pin EPS/ATX12V connector(s) to your motherboard's CPU power socket(s).
6. اتصال برق PCIe: For graphics cards, connect the appropriate PCIe power connectors (e.g., 6+2-pin) to your graphics card(s). The Rebel P10 supports ATX 3.1, ensuring compatibility with the latest generation of power-hungry GPUs.
   

   Image: A selection of flat cables included with the Sharkoon Rebel P10 850W Power Supply Unit. These flat cables are designed for improved cable management and better airflow within the computer case.

7. Connect Peripheral Power: Connect SATA power connectors to your SSDs, HDDs, and optical drives. Use Molex connectors for any other compatible peripherals. The flat cable design of the Rebel P10 aids in efficient cable routing and improved airflow.
8. مدیریت کابل: Organize cables neatly to ensure proper airflow and a tidy build.
9. کیس را ببندید و برق AC را وصل کنید: Close your PC case. Connect the AC power cable to the PSU's power inlet and then to a grounded wall outlet. Ensure the power switch on the PSU is in the 'OFF' position before connecting to the wall outlet.
   

   تصویر: عقب view of the Sharkoon Rebel P10 850W Power Supply Unit, showing the AC power input and the main power switch. This switch controls the power flow to the unit.

5. دستورالعمل های عملیاتی

Once the PSU is installed and all connections are secure:

1. روشن کردن: کلید پاور پشت PSU را در حالت «روشن» قرار دهید.
2. راه اندازی سیستم: برای روشن کردن سیستم، دکمه پاور روی کیس کامپیوتر خود را فشار دهید.
3. عملکرد بی صدا: The Rebel P10 features a 120mm fan with a fluid dynamic bearing, designed for quiet operation even under load.

6. تعمیر و نگهداری

نگهداری منظم به تضمین طول عمر و عملکرد بهینه PSU شما کمک می‌کند:

• حذف گرد و غبار: Periodically clean dust from the PSU's fan and ventilation grilles using compressed air. Ensure the system is powered off and unplugged before cleaning.
• بررسی کابل: Occasionally check that all power cables are securely connected and not obstructing airflow.
• Stable Voltage: The Rebel P10 utilizes DC/DC technology for optimal and accurate voltage regulation, contributing to system stability.

7 عیب یابی

If you encounter issues with your PSU, consider the following:

• بدون برق:
  • Ensure the AC power cable is securely connected to both the PSU and the wall outlet.
  • مطمئن شوید که کلید پاور در پشت PSU در وضعیت «روشن» قرار دارد.
  • با وصل کردن دستگاه دیگری به پریز برق، آن را بررسی کنید.
  • Ensure all internal power connectors (24-pin, CPU, PCIe) are firmly seated.
• ناپایداری/خرابی سیستم:
  • مطمئن شوید که نیازهای برق سیستم شما از ظرفیت ۱۲۰۰ واتی منبع تغذیه تجاوز نکند.
  • Verify all components are correctly installed and receiving power.
  • The Rebel P10 includes comprehensive protection features (e.g., overcurrent, overload protection) to prevent damage in case of anomalies. If the PSU shuts down unexpectedly, it might be due to one of these protections activating.
• صدای غیرمعمول:
  • Check for any cables or obstructions interfering with the PSU fan.
  • Ensure the PSU is securely mounted to prevent vibrations.

If problems persist, consult a qualified technician or contact Sharkoon support.

8. مشخصات

9. گارانتی و پشتیبانی

Sharkoon products are manufactured to high quality standards and are covered by a manufacturer's warranty. For specific warranty terms and conditions, please refer to the warranty card included with your product or visit the official Sharkoon webسایت

For technical support, troubleshooting assistance, or to inquire about replacement parts, please visit the official Sharkoon support page or contact their customer service department. Contact information can typically be found on the manufacturer's webسایت:

www.sharkoon.com