1. مقدمه
This manual provides comprehensive instructions for the safe and effective installation, operation, and maintenance of the Eaton B-line Series B422-1 1/2AL Right Angle Beam Clamp. This aluminum clamp is designed for securing pipes or conduits to structural beams at a right angle, offering a robust connection with a specified load capacity.
Please read this manual thoroughly before installation and retain it for future reference. Adherence to these instructions will ensure proper function and safety.
2. اطلاعات ایمنی
WARNING: Failure to follow these safety instructions may result in property damage, serious injury, or death.
- همیشه هنگام نصب از تجهیزات حفاظت فردی مناسب (PPE)، از جمله عینک ایمنی و دستکش استفاده کنید.
- Ensure the structural beam and the pipe/conduit are capable of supporting the combined weight of the clamp, attached items, and any potential loads.
- Do not exceed the maximum rated load capacity of 500 lbs for this clamp.
- Verify that all bolts and nuts are securely tightened to the manufacturer's recommended torque specifications (if available, otherwise ensure firm tightness without over-tightening).
- cl را بازرسی کنیدamp and surrounding structure regularly for signs of wear, corrosion, or damage. Replace damaged components immediately.
- Installation should be performed by qualified personnel familiar with local building codes and safety regulations.
3. اجزای محصول
The Eaton B-line Series B422-1 1/2AL Right Angle Beam Clamp typically consists of the following components:
- cl اصلیamp body (aluminum)
- U-bolt or similar pipe-securing mechanism
- Mounting bolts and nuts (quantity as required for secure fastening)
شکل 1: Illustration of the Eaton B422-1 1/2AL Right Angle Beam Clamp in an installed configuration.
This illustration demonstrates the correct installation of the Eaton B422-1 1/2AL Right Angle Beam Clamp. It shows the clamp securing a cylindrical pipe to the flange of a structural beam using two bolts and nuts. The clamp body is positioned over the beam flange, and the pipe is cradled by the U-shaped portion of the clamp, secured by the bolts.
4. راه اندازی و نصب
- محل نصب را مشخص کنید: Select a suitable structural beam that can safely support the intended load. Ensure the beam flange is compatible with the clampطراحی
- Cl را قرار دهیدamp: Place the main body of the B422-1 1/2AL clamp over the edge of the structural beam's flange. The curved portion designed to hold the pipe should face downwards.
- Insert Pipe/Conduit: Carefully position the 1 1/2-inch pipe or conduit into the U-shaped cradle of the clamp.
- بست های ایمن: Insert the provided bolts through the clamp body and the pipe-securing mechanism. Thread the nuts onto the bolts.
- محکم کردن اتصالات: Using appropriate tools, gradually tighten the nuts evenly until the clamp firmly grips both the beam and the pipe. Avoid over-tightening, which can damage the clamp or the pipe. Ensure the clamp پایدار است و تکان نمیخورد.
- بازرسی نهایی: Visually inspect the installed clamp to confirm it is properly seated, all fasteners are tight, and the pipe is securely held.
5. دستورالعمل های عملیاتی
The Eaton B422-1 1/2AL beam clamp is a static support device. Its "operation" primarily involves ensuring it remains securely installed and within its load limits.
- ظرفیت بار: cl را مشروط نکنیدamp to loads exceeding 500 lbs. This rating includes the weight of the pipe/conduit and any contents or attached equipment.
- بارهای دینامیکی: این clamp is designed for static loads. Avoid applications involving significant vibration, shock, or dynamic forces unless specifically engineered for such conditions.
- ملاحظات زیست محیطی: اطمینان از clamp is used in environments compatible with aluminum construction. Avoid exposure to corrosive agents that could compromise material integrity.
6. تعمیر و نگهداری
Regular maintenance ensures the longevity and safety of the beam clamp.
- بازرسی دوره ای: Conduct visual inspections at least annually, or more frequently in harsh environments or high-stress applications. Check for:
- بست های شل
- Signs of corrosion, cracks, or deformation on the clamp body or fasteners.
- Damage to the pipe or beam at the clampنقطه ورود
- بست ها را محکم کنید: Re-tighten any loose bolts and nuts to ensure secure attachment.
- تمیز کردن: cl را تمیز کنیدamp as needed to remove dirt, dust, or debris that could obscure damage or contribute to corrosion.
- جایگزینی: If any part of the clamp shows significant wear, damage, or corrosion, replace the entire clamp assembly. Do not attempt to repair damaged clamps.
7 عیب یابی
This section addresses common issues that may arise with beam clamp تاسیسات
- Clamp is Loose:
- علت: Fasteners not tightened sufficiently or have loosened over time.
- راه حل: Re-tighten all bolts and nuts securely. If loosening persists, consider using thread-locking compound (if compatible with materials and environment) or consult a professional.
- Pipe/Conduit Slipping:
- علت: cl ناکافیamping force, incorrect pipe size, or excessive load.
- راه حل: Ensure fasteners are tight. Verify the pipe diameter is 1 1/2-inch for optimal fit. Reduce the load if it exceeds the clamp's capacity.
- Visible Damage to Clamp:
- علت: Overloading, impact, or material fatigue.
- راه حل: فوراً کلر را برداریدamp from service and replace it with a new, undamaged unit. Do not use damaged clamps.
8. مشخصات
| صفت | مشخصات |
|---|---|
| سازنده | Eaton Electrical |
| شماره مدل | B422-1 1/2AL |
| شماره قطعه | B422-1 1/2AL |
| مواد | آلومینیوم |
| Pipe/Conduit Size Compatibility | 1 1/2 اینچ |
| حداکثر بار نامی | 500 پوند |
| ضریب ایمنی | 5 |
| مقدار بسته مورد | 1 |
9. اطلاعات پشتیبانی و تماس
For technical assistance, product inquiries, or to report issues, please contact Eaton Electrical customer support. Refer to the official Eaton website for the most current contact details and additional product resources.
Eaton Electrical Official Webسایت: www.eaton.com
Please note that product specifications and information are subject to change without notice. Always refer to the latest documentation provided by the manufacturer.
