LEDVANCE 17W 2400LM IP65 LED Spotlight with Motion and Light Sensor User Manual

1. مقدمه

Thank you for choosing the LEDVANCE 17W 2400LM IP65 LED Spotlight with Motion and Light Sensor. This manual provides essential information for the safe installation, operation, and maintenance of your new LED spotlight. Please read these instructions carefully before installation and retain them for future reference.

2. اطلاعات ایمنی

• ایمنی برق: Installation must be performed by a qualified electrician in accordance with all local and national electrical codes. Ensure the power supply is disconnected before installation, maintenance, or repair.
• جلدtage: This product operates on 220 Volts. Verify your power supply matches this requirement.
• رتبه IP65: The spotlight is rated IP65, meaning it is protected against dust ingress and low-pressure water jets from any direction. It is suitable for outdoor use but should not be submerged in water.
• گرما: Do not cover the spotlight during operation, as this may cause overheating.
• غیر قابل تنظیم: This LED spotlight is non-dimmable. Do not connect it to a dimmer switch.
• منبع نور: The LED light source is not replaceable. If the light source fails, the entire luminaire must be replaced.

3. محتویات بسته

لطفاً بسته را بررسی کنید تا از وجود همه اجزا اطمینان حاصل شود:

• LEDVANCE 17W 2400LM LED Spotlight unit
• نصب و استقرار براکت
• Screws and wall anchors (may vary by region)
• راهنمای دستورالعمل

4. راه اندازی و نصب

برای نصب صحیح مراحل زیر را دنبال کنید:

4.1 پیش نصب

• خاموش: مطمئن شوید که منبع تغذیه اصلی به محل نصب از طریق کلید قطع شده است.
• انتخاب مکان: Choose a suitable outdoor location for the spotlight. Consider the desired coverage area for the light and the effective range of the motion and light sensors. Ensure the mounting surface is sturdy enough to support the fixture.
• Dimensions Check: Refer to the product dimensions to ensure adequate space for installation.

This diagram illustrates the physical dimensions of the LEDVANCE LED Spotlight. The front view shows a width of 157 mm, and the side view shows a height of 183 mm and a depth of 56.5 mm, providing crucial measurements for installation planning.

4.2 نصب

1. Position the mounting bracket on the desired surface and mark the drilling points.
2. سوراخ‌ها را در موقعیت‌های مشخص شده سوراخ کنید و در صورت لزوم، لنگرهای دیواری را وارد کنید.
3. با استفاده از پیچ‌های ارائه شده، براکت نصب را به سطح مورد نظر محکم کنید.
4. Attach the LED spotlight unit to the mounting bracket, ensuring it is firmly secured. Adjust the angle of the spotlight as needed.

4.3 سیم کشی

• Connect the spotlight's electrical wires to your mains power supply (220V). Ensure correct polarity (Live, Neutral, Earth) according to local wiring regulations.
• Properly insulate all connections to prevent short circuits and ensure safety.
• Once wiring is complete and secure, restore power to the circuit.

This image displays the product packaging for the LEDVANCE Floodlight Sensor, highlighting key features such as 17W power, 2400 lumens, IP65 rating, 5-year guarantee, 4000K color temperature, and motion/light sensor capabilities. It also shows the product's model number and various certifications.

5. دستورالعمل های عملیاتی

The LEDVANCE spotlight is designed for automatic operation based on its integrated motion and light sensors.

• Light Sensor (Dusk-to-Dawn): The integrated light sensor detects ambient light levels. The spotlight will automatically activate when the ambient light falls below a certain threshold (e.g., at dusk) and deactivate when sufficient light is present (e.g., at dawn).
• سنسور حرکت: The motion sensor detects movement within its detection range. When motion is detected, the spotlight will illuminate for a set duration. After the motion ceases and the set time expires, the light will turn off, provided the ambient light level is above the threshold set by the light sensor.
• تنظیمات: While specific adjustment controls are not detailed, some models may feature adjustable settings for motion sensitivity, light threshold, and illumination duration. Refer to any labels on the fixture itself for potential adjustment dials.

6. تعمیر و نگهداری

The LEDVANCE spotlight requires minimal maintenance.

• تمیز کردن: Periodically clean the surface of the spotlight and the sensor lens with a soft, damp cloth. Do not use abrasive cleaners or solvents, as these can damage the finish or the sensor.
• بازرسی: مرتباً دستگاه را از نظر هرگونه علائم آسیب، سیم‌کشی شل یا خوردگی بررسی کنید. در صورت بروز هرگونه مشکل، فوراً به آن رسیدگی کنید.
• بدون قطعات قابل سرویس توسط کاربر: There are no user-serviceable parts inside the fixture. Do not attempt to open or repair the unit yourself.

7 عیب یابی

If you encounter issues with your LEDVANCE spotlight, refer to the following common problems and solutions:

8. مشخصات

9. گارانتی و پشتیبانی

This LEDVANCE spotlight comes with a 5 سال گارانتی از تاریخ خرید این ضمانت نقص در مواد و طرز کار در استفاده معمولی را پوشش می دهد.

For warranty claims, technical support, or any questions not covered in this manual, please contact your retailer or the LEDVANCE customer service directly. Keep your proof of purchase for warranty validation.