مقدمه
This manual provides instructions for the Grundig Wireless LED Light Bar with Motion Detector. This smart LED lamp is designed for use in cabinets, closets, kitchen furniture, or any dark area requiring additional illumination. It features a sleek design and offers three operating modes: continuously on, off, and automatic motion detection.
راه اندازی و نصب
Follow these steps to install your LED light bar:
- Mount the Metal Brackets: Select the desired location for the light bar. Mount the two metal brackets, ensuring a minimum spacing of 20 cm (approximately 7.9 inches) between them.
- Place the LED Lamp: Carefully place the LED light bar into the mounted metal brackets.
- پیوست ایمن: The integrated magnets within the light bar will securely hold it in place on the metal brackets.
Image: Grundig Wireless LED Light Bar with Motion Detector. The image shows the sleek, white LED light bar, highlighting its compact design suitable for under-cabinet installation.
حالت های عملیاتی
The Grundig LED Light Bar offers three operating modes for versatile use:
- حالت روشن: چراغ به طور مداوم روشن می ماند.
- حالت خاموش: چراغ خاموش است.
- AUTO (Motion Detection) Mode: The light automatically turns on when motion is detected and turns off after a period of inactivity. This mode is energy-efficient.
To switch between modes, locate the mode selection switch on the device and slide it to the desired setting.
تعمیر و نگهداری
To ensure optimal performance and longevity of your Grundig LED Light Bar, follow these maintenance guidelines:
- تمیز کردن: Wipe the surface of the light bar with a soft, dry cloth. Do not use abrasive cleaners or solvents, as these can damage the finish.
- شارژ کردن: Recharge the light bar via its USB port when the battery is low. Ensure you use a compatible 5V DC, 1A power source.
- ذخیره سازی: If storing the device for an extended period, ensure it is fully charged and stored in a cool, dry place.
عیب یابی
If you encounter issues with your LED light bar, refer to the following common solutions:
| مشکل | علت احتمالی | راه حل |
|---|---|---|
| چراغ روشن نمی شود | باتری تمام شده است. | Recharge the light bar using the provided USB cable. |
| Motion sensor not working in AUTO mode. | Insufficient ambient light or sensor obstruction. | Ensure the sensor is not blocked and test in a darker environment. Verify the mode switch is set to AUTO. |
| نور سوسو میزند یا کمنور است. | باتری کم. | Recharge the light bar. |
مشخصات
| نام تجاری | گروندیگ |
| شماره مدل | 8711252574158 |
| قدرت | 1.5 وات |
| جلدtage | 5 ولت DC |
| فعلی | 1 Ampپیش از این |
| تعداد LED | 48 |
| شار نورانی | 85 لومن |
| ابعاد (L x W x H) | 0.45 × 3.6 × 0.15 سانتی متر |
| وزن | 187 گرم |
| مواد | فلز |
| رنگ | سفید |
| ویژگی های خاص | آشکارساز حرکت |
| منبع تغذیه | شارژ باتری (USB قابل شارژ) |
| نوع نصب | نصب سطحی |
| استفاده خاص | Kitchen, Cabinet, Closet Lighting |
گارانتی و پشتیبانی
Information regarding specific warranty terms and customer support contact details is typically provided with the product packaging or on the manufacturer's official webسایت. لطفاً برای دقیقترین و بهروزترین اطلاعات به آن منابع مراجعه کنید.
For further assistance, please contact Grundig customer service.
