Vente-unique ARNEGA 150 cm Wall-Mounted Vanity Unit Instruction Manual

1. مقدمه

Thank you for choosing the Vente-unique ARNEGA 150 cm Wall-Mounted Vanity Unit. This manual provides essential information for the safe assembly, installation, and proper use of your new bathroom furniture. Please read these instructions carefully before beginning assembly and retain them for future reference.

Image 1.1: The ARNEGA 150 cm wall-mounted vanity unit installed in a bathroom, featuring a white finish and ribbed front panels.

2. اطلاعات ایمنی

Please observe the following safety precautions during assembly, installation, and use of the vanity unit:

• تمام دستورالعمل ها را بخوانید: قبل از مونتاژ، مطمئن شوید که تمام مراحل را درک کرده‌اید.
• از ابزار مناسب استفاده کنید: Ensure you have the correct tools for assembly and wall mounting.
• نصب دیواری: This unit is designed to be wall-mounted. Ensure the wall structure is suitable to support the weight of the unit and its contents. Consult a professional if unsure.
• نصب ایمن: Improper installation can lead to the unit falling, causing injury or damage. Always secure the unit firmly to the wall.
• قرار گرفتن در معرض آب: While the unit is moisture-resistant, avoid prolonged exposure to standing water. Wipe up spills immediately.
• ایمنی کودکان: Keep small parts away from children during assembly. Do not allow children to climb on or hang from the unit.
• محدودیت‌های وزنی: Do not overload drawers or the top surface.

3. محتویات بسته

Before beginning assembly, verify that all components are present and undamaged. If any parts are missing or damaged, please contact Vente-unique customer support.

• Vanity unit frame (MDF)
• Drawer components (2 sets)
• Push-to-open drawer slides (2 sets)
• Mounting hardware (screws, wall plugs - specific to wall type may be required)
• دستورالعمل‌های مونتاژ (این دفترچه راهنما)

Note: Sinks, faucets, and plumbing fixtures are not included with this vanity unit.

4. راه اندازی و مونتاژ

This unit requires self-assembly and wall mounting. It is recommended that two people assemble and install this unit for safety and ease.

4.1 ابزار مورد نیاز

• پیچ گوشتی (سر فیلیپس)
• Drill and drill bits (appropriate for wall type)
• سطح
• نوار اندازه گیری
• مداد
• عینک ایمنی

4.2 مراحل مونتاژ

1. Unpack components: تمام قطعات را با دقت از بسته‌بندی خارج کرده و آنها را روی یک سطح تمیز و نرم قرار دهید تا از خراشیدگی جلوگیری شود.
2. قاب را جمع کنید: Follow the diagrams provided in the separate assembly sheet (if applicable) to connect the main panels of the vanity unit frame using the provided fasteners. Ensure all connections are secure.
3. Install drawer slides: Attach the drawer slides to the inside of the vanity unit frame according to the instructions. Ensure they are level and aligned.
4. جمع آوری کشوها: Construct the two drawers, ensuring the ribbed front panels are correctly oriented. Install the push-to-open mechanisms onto the drawers.
5. Insert drawers: Carefully slide the assembled drawers onto the installed drawer slides. Test the push-to-open function.

4.3 نصب روی دیوار

The ARNEGA vanity unit is designed for wall mounting. Proper installation is crucial for safety.

1. Determine mounting height: Decide on the desired height for your vanity unit, considering the height of your sinks and user comfort.
2. نقاط حفاری را علامت گذاری کنید: Hold the assembled unit against the wall at the desired height and use a level to ensure it is perfectly horizontal. Mark the drilling points for the wall brackets/fasteners. Refer to the technical drawing for mounting points.
3. سوراخ کن: Drill holes at the marked points using an appropriate drill bit for your wall type (e.g., masonry, drywall). Insert wall plugs if necessary.
4. Secure unit: With assistance, lift the unit and align the mounting points with the drilled holes. Secure the unit to the wall using the provided screws or suitable wall fasteners. Ensure the unit is firmly attached and does not wobble.
5. Install plumbing: Once the unit is securely mounted, proceed with the installation of your sinks and plumbing according to their respective instructions.

Image 4.1: Technical drawing illustrating the dimensions (150 cm length, 47 cm depth, 32 cm height) and internal structure of the ARNEGA vanity unit.

تصویر 4.2: جلو view of the ARNEGA vanity unit, showcasing its textured design.

تصویر ۳: زاویه‌دار view of the ARNEGA vanity unit, emphasizing its wall-mounted design.

5. عملیات

The ARNEGA vanity unit features two spacious drawers with a push-to-open mechanism for convenient access.

• باز کردن کشوها: Gently push on the center of the drawer front. The drawer will release and extend slightly. Pull the drawer open completely.
• بستن کشوها: Push the drawer firmly until it clicks into its closed position.
• ذخیره سازی: Utilize the two large drawers for organizing bathroom essentials. Avoid placing excessively heavy items in the drawers to ensure smooth operation and prevent damage to the slides.

Image 5.1: The ARNEGA vanity unit with its two push-to-open drawers extended, showing the internal storage capacity.

6. تعمیر و نگهداری

Proper care will ensure the longevity and appearance of your ARNEGA vanity unit.

• تمیز کردن: سطوح را با نرم، دamp cloth. For stubborn marks, use a mild, non-abrasive cleaner specifically designed for furniture. Avoid harsh chemicals, abrasive pads, or solvents.
• رطوبت: Although the unit is moisture-resistant, it is not waterproof. Immediately wipe away any water spills or condensation to prevent damage to the MDF material. Ensure good ventilation in the bathroom.
• مکانیزم‌های کشو: Periodically check the drawer slides and push-to-open mechanisms for smooth operation. If they become stiff, a small amount of silicone spray can be applied to the slides (avoiding contact with wood surfaces).
• اتصال دهنده ها: Occasionally check all assembly and mounting fasteners to ensure they remain tight. Retighten if necessary.

7 عیب یابی

8. مشخصات

9. گارانتی و پشتیبانی

Vente-unique products are covered by legal guarantees. For specific details regarding your product's warranty, please refer to the terms and conditions of sale at the time of purchase or contact Vente-unique customer service.

• برمی گرداند: This product is eligible for 30-day returns. Please refer to the retailer's return policy for full details.
• قطعات یدکی: در حال حاضر اطلاعاتی در مورد موجودی قطعات یدکی در دسترس نیست.
• پشتیبانی مشتری: For assistance with assembly, missing parts, or any other inquiries, please contact Vente-unique customer support through their official channels.

You can visit the Vente-unique brand store for more information: Vente-unique Brand Store