مقدمه
This manual provides detailed instructions for the setup, operation, and maintenance of your FLYCOLOR Turbo Racing 1:76 Scale C65 Drift RC Car. This miniature remote-controlled car features full proportional steering, a 2.4GHz remote control, and an integrated gyroscope for enhanced drift performance. Please read this manual thoroughly before use to ensure proper function and longevity of your product.
محتویات بسته
مطمئن شوید که تمام موارد ذکر شده در زیر در بسته شما موجود است:
- 1:76 C65 Drift RC Car (1 unit)
- P21SVC 4CH Remote Control (1 unit)
- Car Shells without color (2 units)
- Stainless Steel Screwdriver (1 unit)
- کابل شارژ نوع C (1 عدد)
- راهنمای کاربر (1 واحد)
- جعبه بسته بندی (1 واحد)
Image: Contents of the Turbo Racing C65 Drift RC Car package, showing the car, remote control, two unpainted body shells, and charging cable.
راه اندازی
1. Charging the RC Car Battery
The RC car is equipped with a built-in 3.7V 55mAh LiPo battery. Before first use, fully charge the car battery.
- Connect the provided Type-C charging cable to the charging port on the RC car.
- Connect the other end of the Type-C cable to a compatible USB power source (e.g., computer USB port, USB wall adapter).
- The charging indicator light on the car will show charging status (refer to car's specific LED behavior for full charge indication).
- A full charge typically takes approximately 40 minutes. The car will operate for up to 30 minutes on a full charge.
Caution: Do not use USB-C to USB-C fast chargers, as the car's small battery may not be designed to handle high charging voltages
2. نصب باتری های کنترل از راه دور
The P21SVC remote control requires 4 AAA batteries (not included).
- محفظه باتری را در پشت ریموت کنترل قرار دهید.
- درپوش محفظه باتری را باز کنید.
- ۴ باتری AAA را وارد کنید و از قطبیت صحیح (+/-) اطمینان حاصل کنید.
- درپوش محفظه باتری را محکم ببندید.
3. Pairing the Remote Control and Car
To establish a connection between the remote control and the RC car:
- Ensure both the RC car and the remote control are powered on.
- Locate the BIND pin hole on the RC car.
- Using the provided stainless steel screwdriver or a similar small tool, press and hold the button inside the BIND pin hole.
- The front lights of the vehicle will flash during the pairing process.
- Once successfully paired, the front lights will change from flashing to permanently on.
Important: When powering on, avoid touching the throttle trigger on the remote control to prevent unintended automatic movement of the car.
4. Attaching Replaceable Body Shells
The C65 Drift RC Car comes with two additional unpainted body shells, allowing for customization.
- Gently remove the currently attached body shell by carefully lifting it from the chassis.
- Align the new body shell with the mounting points on the chassis.
- Press down firmly until the shell is securely attached.
دستورالعمل های عملیاتی
۶.۱ کنترلهای پایه
- فرمان: Use the steering wheel on the remote control to turn the car left or right. The C65 features full proportional steering for precise control.
- دریچه گاز: Use the trigger on the remote control to move the car forward or backward. Pull the trigger for forward motion, push it for reverse. The car has proportional throttle control.
Image: The miniature C65 RC car on a desktop, highlighting its suitability for steering and driving in small spaces.
Image: The C65 RC car demonstrating its greater steering angle, enabling desktop drifting for beginners.
2. Lighting Functions
- چراغ های جلو: The car features high simulation headlights with a spotlight effect and a double flash function.
- چراغ های شاسی: The LED chassis lamp can be controlled using Channel 3 on your remote control.
- Tail Lights/Stop Lights: The car has functional tail lights. During braking, the stoplights will illuminate.
Image: The C65 RC car showcasing its high simulation headlights and LED chassis lighting.
تصویر: عقب view of the C65 RC car, illustrating its cool taillights and functional stoplights that activate during braking.
3. THR-Curve Upgrade
The C65 features an upgraded THR-Curve for refined throttle response:
- The first half (0-50%) of the accelerator range provides a slow, linear speed increase, offering gentle and smooth control.
- The second half (50-100%) of the accelerator range provides a faster speed increase with strong power output, suitable for more dynamic driving and drifting.
Image: The C65 RC car in motion, emphasizing the upgraded gyroscope chip and program for improved stability and easier drifting.
تعمیر و نگهداری
1. تمیز کردن
Regular cleaning helps maintain the performance and appearance of your RC car.
- Use a soft, dry cloth to wipe down the car body and chassis.
- Avoid driving on surfaces with excessive dust or pet hair, as these can accumulate in moving parts. If necessary, the car is designed for easy disassembly for cleaning.
- Do not use water or chemical cleaners directly on electronic components.
2. مراقبت از باتری
- Always fully charge the car battery before use.
- Do not overcharge or completely discharge the LiPo battery.
- Store the car and remote control in a cool, dry place when not in use.
- Remove AAA batteries from the remote control if storing for extended periods to prevent leakage.
3. Body Shell Replacement
The removable body shells allow for easy replacement or customization. Handle them gently to avoid damage.
عیب یابی
به مشکلات رایج زیر و راهحلهای آنها توجه کنید:
| مشکل | راه حل |
|---|---|
| Car not moving in a straight line | Check if the remote control's ST-TRIM is centered. Adjust ST-TRIM to correct the car's straight-line movement. |
| Automatic forward/backward movement | Align the TH-TRIM arrow on the remote control with the center point while powered on. Then, turn off and restart the remote control. Ensure the throttle trigger is not touched during startup. |
| Car unstable or shaking during operation | Instability may occur due to terrain or high speed. If operating at 100% speed, insufficient grip can cause deviation. Adjust speed or driving surface. |
| Remote control and car not paired (re-code) | With both remote and car powered on, use a tool to press the BIND pin hole on the vehicle. The front lights will flash, then become solid when pairing is successful. |
مشخصات
- نام مدل: C65 Drift RC Car
- مقیاس: 1:76
- باند فرکانس: 2.4 گیگاهرتز
- فاصله کنترل: 30 متر
- زمان کار: تا 30 دقیقه
- Slope Angle: 30 درجه
- حالت رانندگی: دو چرخ محرک
- فرمان: فرمان متناسب
- باتری: 3.7V 55mAh LiPo (included)
- زمان شارژ: تقریبا 40 دقیقه
- Trim Function: بله
- Steering Reverse (REV): بله
- Car Dimensions: 60 × 25.6 × 17.3 میلی متر (2.36 × 1.01 × 0.68 اینچ)
- وزن مورد: 12.3 اونس
- سازنده: FLYCOLOR
- سن توصیه شده: 14 سال به بالا
اطلاعات ایمنی
لطفاً نکات ایمنی زیر را رعایت کنید:
- خطر خفگی: قطعات کوچک. برای کودکان زیر 14 سال نیست.
- همیشه ماشین کنترلی را در محیطی امن، دور از افراد، حیوانات خانگی و موانع هدایت کنید.
- در نزدیکی آب یا در شرایط مرطوب کار نکنید.
- Do not modify the product, as this may void the warranty and create safety risks.
- باتریها را طبق مقررات محلی و به طور مسئولانه دور بیندازید.
گارانتی و پشتیبانی
For warranty information or technical support, please refer to the contact details provided with your purchase or visit the official FLYCOLOR webسایت. مدرک خرید خود را برای هرگونه ادعای گارانتی نگه دارید.
رسمی Webسایت: www.turboracing.net
