1. مقدمه
This manual provides essential instructions for the setup, operation, maintenance, and troubleshooting of your Epson TM-T82X-462 Monochrome POS Printer. Designed for reliability and flexibility, this cost-effective thermal printer is suitable for various business environments, particularly point-of-sale applications.
Key features include a high printing speed of 200mm/s, Ethernet connectivity for easy configuration, and a compact, durable design. Its ease-of-use is enhanced by drop-in paper loading, an auto-cutter, and clear status LEDs.
شکل 1: Epson TM-T82X-462 Monochrome POS Printer. This image displays the Epson TM-T82X-462 monochrome thermal printer, a compact black device designed for point-of-sale applications. A receipt is shown emerging from the top, detailing a sample transaction from 'THE STORE'. The front panel features LED indicators and control buttons.
2. راه اندازی
2.1 باز کردن بسته بندی
Carefully remove the printer and all accessories from the packaging. Ensure all components listed in the packing material are present.
2.2 کابل های اتصال
- اتصال برق: Connect the power cable to the printer's power port and then to a suitable electrical outlet.
- ارتباط دیتا: برای اتصال به شبکه، یک کابل اترنت را از پورت اترنت چاپگر به روتر یا سوئیچ شبکه خود وصل کنید.
2.3 بارگذاری کاغذ
The TM-T82X-462 features convenient drop-in paper loading:
- پوشش بالایی چاپگر را باز کنید.
- Insert a new roll of thermal paper (79.5 ± 0.5 mm width) into the paper compartment, ensuring the paper feeds from the bottom of the roll.
- Pull a small amount of paper past the cutter and close the top cover firmly until it latches.
2.4 نصب درایور
Install the appropriate printer drivers on your computer or POS system. Drivers are typically available on the Epson support website. Follow the on-screen instructions for installation and configuration.
3. دستورالعمل های عملیاتی
3.1 روشن/خاموش کردن
- To power on, press the power button located on the front panel. The status LEDs will illuminate.
- To power off, press and hold the power button until the printer shuts down.
3.2 چاپ اولیه
Once connected and drivers are installed, send print commands from your POS software or application. The printer will automatically feed and cut the receipt.
۶.۲ آشنایی با نشانگرهای LED
The front panel features status LEDs that provide information about the printer's status:
- LED قدرت: Indicates the printer is powered on.
- خطای LED: Illuminates or flashes to indicate an error condition (e.g., paper out, cover open). Refer to the troubleshooting section for details.
- Paper Out LED: Indicates that the paper roll is empty or running low.
4. تعمیر و نگهداری
4.1 تمیز کردن چاپگر
تمیز کردن منظم به حفظ عملکرد بهینه کمک میکند:
- قبل از تمیز کردن، مطمئن شوید که چاپگر خاموش و از برق کشیده شده است.
- از پارچه نرم و بدون پرز استفاده کنیدampened with isopropyl alcohol to gently clean the thermal print head.
- Clean the paper path and exterior casinگرم با خشک یا کمی دamp پارچه از پاک کننده های ساینده خودداری کنید.
4.2 Replacing Paper
When the Paper Out LED illuminates, replace the paper roll as described in the "Loading Paper" section (2.3).
4.3 Auto-Cutter Maintenance
The auto-cutter is designed for long-term use with a life of 1.5 million cuts. If you experience issues with paper cutting, ensure the paper path is clear of debris. Do not attempt to lubricate or disassemble the auto-cutter.
5 عیب یابی
This section addresses common issues you might encounter with your TM-T82X-462 printer.
۵.۲ چاپگر پاسخ نمیدهد
- بررسی قدرت: Ensure the power cable is securely connected and the printer is powered on.
- بررسی اتصالات: Verify that the Ethernet cable is properly connected to both the printer and the network device.
- وضعیت راننده: Confirm that the printer drivers are correctly installed and the printer is selected as the default printing device in your system settings.
5.2 Paper Jams or No Paper Feed
- رول کاغذ: Ensure the paper roll is correctly loaded and not empty.
- مسیر پاک: Open the cover and carefully remove any jammed paper or debris from the paper path.
- Cover Closed: Make sure the top cover is securely closed.
۶.۲ کیفیت چاپ ضعیف
- Thermal Paper: مطمئن شوید که از کاغذ حرارتی با کیفیت بالا استفاده میکنید.
- هد چاپ را تمیز کنید: Clean the thermal print head as described in the maintenance section (4.1).
5.4 Error LED Illuminated
If the Error LED is on or flashing, it indicates a specific problem. Consult the printer's detailed error code documentation (usually available on the manufacturer's website) for precise diagnosis. Common causes include paper out, cover open, or print head overheating.
6. مشخصات
| ویژگی | جزئیات |
|---|---|
| نام مدل | TM-T82X-462 |
| نام تجاری | اپسون |
| فناوری چاپ | حرارتی |
| خروجی چاپگر | تک رنگ |
| حداکثر سرعت چاپ (تک رنگ) | 200 میلی متر بر ثانیه |
| رابط سخت افزار | اترنت |
| فناوری اتصال | Wi-Fi (also supports Ethernet) |
| ابعاد محصول | ۱۸ عمق × ۳۵ عرض × ۳۰ ارتفاع (سانتیمتر) |
| حداکثر اندازه رسانه | 79.5 ± 0.5 میلی متر |
| اندازه ورق | 79.5 ± 0.5 میلی متر |
| وزن مورد | ۱۴.۲۵ کیلوگرم (۱۴۲۵۰ گرم) |
| Auto-Cutter Life | 1.5 میلیون کاهش |
| MCBF (چرخه های متوسط بین شکست ها) | 60 میلیون خط |
7. گارانتی و پشتیبانی
7.1 گارانتی محصول
This Epson TM-T82X-462 printer typically comes with a standard manufacturer's warranty. Extended warranty options, such as 1-year or 2-year plans, may also be available for purchase to provide additional coverage.
For specific warranty terms and conditions, please refer to the warranty card included with your product or visit the official Epson support webسایت
7.2 پشتیبانی فنی
For technical assistance, driver downloads, or further troubleshooting, please visit the official Epson support website or contact Epson customer service. Have your printer model number (TM-T82X-462) and serial number ready when seeking support.
