VEVOR 15-Inch Soft Close Bottom Mount Drawer Slides

1. اطلاعات ایمنی

Please read and understand all instructions before installation and use. Failure to follow these instructions may result in injury or product damage. Keep this manual for future reference.

• هنگام نصب، همیشه از تجهیزات حفاظت فردی مناسب مانند عینک ایمنی و دستکش استفاده کنید.
• برای هر مرحله از فرآیند نصب، از ابزارهای صحیح استفاده کنید.
• Ensure the cabinet structure is sturdy enough to support the drawer slides and the intended load.
• Do not exceed the maximum load capacity of 100 lbs (45.4 kg) per pair of slides.
• در حین نصب، کودکان و حیوانات خانگی را از محل کار دور نگه دارید.

2. محصول تمام شدview

2.1 ویژگی های محصول

• 100 lbs (45.4 kg) Load Capacity: Constructed from galvanized steel, these slides support heavy loads and offer corrosion resistance.
• Silent Soft Close: Equipped with springs and a dampening hydraulic cylinder for smooth, quiet, and automatic drawer closure.
• سه سtage Full Extension: Allows the drawer to extend completely, providing full access to contents and eliminating blind spots.
• 3D Adjustment: Features a 3D adjuster and metal mounting plate for precise calibration, suitable for American-style cabinets.
• Universal Sizes: Available in 15", 18", and 21" lengths, compatible with various drawer slide brands.
• نصب آسان: Designed for straightforward installation with drawer side panels of 1/2 inch and 5/8 inch thickness.

2.2 مشخصات

۳.۱ اجزای موجود

The package includes 6 pairs of VEVOR bottom mount drawer slides, metal mounting brackets, 3D adjustment locks, and self-tapping screws (ST3.5x11 x 72pcs).

تصویر: دقیق view of VEVOR 15-inch drawer slides, including mounting brackets, 3D adjustment locks, and the accompanying screws.

3. دستورالعمل نصب

Follow these steps for proper installation of your VEVOR bottom mount drawer slides. Ensure all measurements are accurate before drilling.

3.1 Prepare the Drawer and Cabinet

Measure the internal cabinet width and the drawer length. The drawer side panels should be 1/2 inch or 5/8 inch thick. Refer to the diagram for precise dimensions and spacing requirements.

Image: Diagram illustrating drawer installation dimensions (mm) and the function of the 3D adjuster for vertical alignment.

Image: Technical drawing detailing the installation spacing guide for bottom-mount concealed drawer slides, including internal cabinet width and drawer back width calculations.

3.2 Mount the Slides to the Cabinet

Secure the rear mounting brackets to the back of the cabinet. Then, attach the drawer slides to the cabinet sides, ensuring they are level and parallel. The slides should be positioned to allow for the full extension and soft-close mechanism to function correctly.

تصویر: نمای نزدیک view of the metal mounting plate and 3D adjustment lock, essential components for securing and aligning the drawer slides.

3.3 Attach the Drawer to the Slides

Align the drawer with the mounted slides. Gently push the drawer into place until it engages with the locking mechanisms on the slides. Ensure a secure fit.

3.4 Adjust the Drawer

Use the 3D adjustment feature to fine-tune the drawer's position. This allows for vertical (up and down), horizontal (left and right), and front-to-back adjustments to achieve perfect alignment with the cabinet face.

۳.۳ راهنمای نصب ویدیویی

Watch this official VEVOR video for a visual demonstration of the installation process, including how to mount the slides, attach the drawer, and make adjustments.

4. عملیات

Your VEVOR drawer slides are designed for smooth and quiet operation.

• فرمت کامل: Pull the drawer completely out to access all contents. The three-stage design ensures no items are hidden at the back.
• Soft Close: When closing the drawer, a gentle push will activate the soft-close mechanism, allowing the drawer to close silently and smoothly without slamming.
• جداسازی / مونتاژ مجدد: To remove the drawer, locate the release levers on the underside of the drawer (typically red or black). Press or pull these levers as instructed in the installation video to disengage the drawer from the slides. To reassemble, align the drawer with the slides and push firmly until it clicks into place.

5. تعمیر و نگهداری

Regular maintenance helps ensure the longevity and smooth operation of your drawer slides.

• تمیز کردن: Periodically wipe down the slides with a clean, dry cloth to remove dust and debris. Avoid using harsh chemicals that could damage the finish or lubrication.
• روغن کاری: If the slides begin to feel stiff or noisy, apply a small amount of silicone-based lubricant to the ball bearings and moving parts. Do not over-lubricate.
• بازرسی: Regularly check all screws and mounting points to ensure they are tight. Inspect the slides for any signs of wear or damage.

6 عیب یابی

If you encounter issues with your drawer slides, refer to the table below for common problems and solutions.

۹. گارانتی و پشتیبانی مشتری

For warranty information, technical assistance, or to report any issues with your VEVOR drawer slides, please contact VEVOR customer support through their official website or the retailer where the product was purchased. Please have your model number (30201B.381-6) and purchase details ready.