Atcall Cell Phone Booster User Manual

1. مقدمه

The Atcall Fast Link Cell Phone Booster is designed to enhance cellular signal strength within your home, office, or other indoor spaces up to 5,000 sq ft. It supports all major Canadian carriers, including Bell, MTS, SaskTel, TELUS, Fido, and Rogers, across Band 12/17, 13, 5, 2/25, and 4/66, and is 5G compatible. This device aims to provide improved voice quality, fewer dropped calls, and faster data speeds by amplifying existing weak signals.

Figure 1: Atcall Fast Link Cell Phone Booster Kit, including the booster unit, outdoor antenna, and cables.

Figure 2: The booster improves voice quality, reduces dropped calls, and enables faster data transfer.

Figure 3: The Atcall booster provides 5G compatible coverage up to 5,000 square feet.

2. اطلاعات ایمنی

Please read all safety warnings and instructions before installing and operating this device. Failure to follow these instructions may result in injury or damage to the product.

• Do not expose the booster or antennas to extreme temperatures, direct sunlight for prolonged periods, or excessive moisture.
• Use only the power supply provided with the unit.
• Ensure all cable connections are secure and properly tightened.
• Avoid placing the booster near heat sources or in enclosed spaces without adequate ventilation.
• دستگاه را دور از دسترس کودکان قرار دهید.
• This device must be operated in a fixed location for in-building use.

3. محتویات بسته

مطمئن شوید که تمام موارد ذکر شده در زیر در بسته شما موجود است:

• 1 x Signal Booster (Built-in Indoor Antenna)
• 1 x Outdoor Antenna
• کابل کواکسیال 1 x 60ft
• 1 عدد منبع تغذیه
• 1 x Mounting Kit (for roof/pole mount)
• ۱ عدد دفترچه راهنمای کاربر (این سند)

Figure 4: Visual representation of all components included in the Atcall Fast Link Cell Phone Booster package.

۱. راه‌اندازی و نصب

Follow these steps for a hassle-free installation. No technical experience is required.

4.1 Pre-Installation: Check Signal Strength

Before installation, it is crucial to identify the strongest outdoor signal. Use your smartphone to check signal strength in different outdoor locations, especially on your roof or highest point. You can use field test mode on your phone:

• برای آیفون: Dial *3001#12345#* then press the call button. Navigate to 'All Metrics' and then 'Serving Cell Info' to check 'Band Info'.
• برای اندروید: Download a signal strength app like "Network Cell Info Lite" to check 'GAUGE' and 'BAND' information.

Aim for a signal strength between -50 dBm and -80 dBm for optimal performance. A signal weaker than -100 dBm may not be sufficient for the booster to operate effectively.

4.2 Outdoor Antenna Installation

Install the outdoor antenna at the highest point possible, such as a roof or pole, where the signal is strongest. Point the antenna towards the nearest cell tower. Ensure it is securely mounted using the provided mounting kit.

4.3 Booster Unit (Indoor Antenna) Placement

The booster unit has a built-in indoor antenna. Place the booster in a central location within your home where you need improved signal. For best performance and to prevent oscillation, maintain a significant separation distance between the outdoor antenna and the indoor booster unit.

Figure 5: For optimal performance, maintain a horizontal distance of >20ft (6m) and a vertical distance of >20ft (6m) between the outdoor antenna and the indoor booster unit. A straight-line distance of >30ft (9m) is recommended.

4.4 اتصالات کابلی

1. یک سر کابل کواکسیال ۶۰ فوتی را به آنتن فضای باز وصل کنید.
2. Route the cable indoors and connect the other end to the 'Outdoor' port on the Atcall booster unit.
3. Ensure all connections are finger-tight.

4.5 روشن کردن

Connect the power supply to the booster unit and then plug it into a standard electrical outlet. The booster will power on, and the LCD display will illuminate.

5. دستورالعمل های عملیاتی

The Atcall Fast Link booster features an HD LCD display for real-time monitoring and easy troubleshooting.

۴.۴ آشنایی با نمایشگر LCD

The LCD screen provides critical information about the booster's status and signal strength for each supported frequency band.

Figure 6: The HD LCD display shows real-time downlink signal strength (dBm), working status (NORM/OSC), frequency band, uplink gain, and downlink gain. It also allows for band switching and power control.

• Signal Strength (dBm): Indicates the strength of the received signal for each band. A higher (less negative) number means a stronger signal.
• وضعیت کار: Displays 'NORM' for normal operation or 'OSC' if oscillation is detected.
• باند فرکانس: Shows the specific cellular band being boosted (e.g., Band 12/17, Band 13).
• بهره آپلینک/داونلینک: را نشان می دهد amplification level for signals going to and from the cell tower.

5.2 Automatic Gain Control (AGC)

The booster is equipped with an Automatic Gain Control (AGC) system. This intelligent technology automatically detects the existing signal strength and adjusts the booster's output power to ensure stable performance and prevent overload, optimizing signal amplification without causing interference.

5.3 Carrier Compatibility

The Atcall Fast Link booster is compatible with all major Canadian carriers and their respective frequency bands, ensuring broad usability across the country.

Figure 7: The booster supports Bell, MTS, SaskTel, TELUS, and Fido, among other Canadian carriers.

6 عیب یابی

If you experience issues with your Atcall Cell Phone Booster, refer to the following common problems and solutions:

6.1 ISED Approval

The Atcall Cell Phone Booster (HVIN: SF005A, IC: 28093-SFZN005) complies with all requirements of the standards applied by Innovation, Science and Economic Development (ISED) Canada. This ensures the device operates safely and effectively within Canadian regulatory guidelines.

Figure 8: The ISED approval label on the Atcall booster, indicating compliance with Canadian regulations.

7. تعمیر و نگهداری

The Atcall Cell Phone Booster requires minimal maintenance to ensure long-term performance:

• تمیز کردن: Use a soft, dry cloth to wipe the booster unit and antennas. Do not use liquid cleaners or aerosols.
• بازرسی کابل: Periodically check all coaxial cable connections for tightness and ensure there is no damage to the cables.
• Antenna Stability: Ensure the outdoor antenna remains securely mounted and its direction has not shifted due to weather or other factors.

8. مشخصات

9. پشتیبانی مشتری

Atcall is committed to providing reliable cellular signal solutions. If you encounter any issues or have questions regarding your Fast Link Cell Phone Booster, please do not hesitate to contact our professional customer support team. We are available to assist you.

For support, please refer to the contact information provided with your product packaging or visit the official Atcall webسایت