Italeri EA-18G Growler 1:48 Plastic Model Kit

1. اطلاعات ایمنی

هشدار: قطعات کوچک. This model kit contains small parts which may pose a choking hazard for children under 3 years of age. Keep all components and tools out of reach of small children.

This product is recommended for ages 12 years and up. Adult supervision is recommended for younger builders.

Always use appropriate tools safely. Exercise caution when using sharp tools (e.g., hobby knives, clippers) and adhesives. Ensure adequate ventilation when using paints and glues.

قبل از شروع مونتاژ، تمام دستورالعمل‌ها را به طور کامل بخوانید.

2. محصول تمام شدview

The Italeri EA-18G Growler 1:48 Plastic Model Kit (Model No. 2824) allows for the construction of a detailed replica of the EA-18G Growler aircraft. This kit is designed for enthusiasts and model builders, offering an engaging assembly experience.

The kit includes all necessary plastic components for assembly. Paints, glues, and additional tools are sold separately and are required to complete the model.

تصویر: جلو view of the Italeri EA-18G Growler 1:48 Plastic Model Kit box, showcasing the aircraft model.

۳. فهرست اجزا

Upon opening the box, verify that all components are present and undamaged. The kit typically includes:

• Plastic sprues containing all model parts
• Decal sheet for markings and insignia
• دفترچه راهنما (این دفترچه راهنما)

If any parts are missing or damaged, please contact Italeri customer support.

4. دستورالعمل مونتاژ

This section provides general guidelines for assembling plastic model kits. For detailed, step-by-step instructions specific to the Italeri EA-18G Growler (Model No. 2824), please refer to the instruction booklet included in your kit.

4.1. آماده سازی

• ابزار مورد نیاز: Hobby knife, plastic cement (glue), sprue cutters, sandpaper/files, tweezers, paint brushes (not included).
• فضای کاری: Prepare a clean, well-lit, and well-ventilated workspace. Protect your work surface from glue and paint.
• Review دستورالعمل: Carefully read through the entire instruction booklet to understand the assembly sequence before starting.

4.2. Part Removal and Cleaning

• Using sprue cutters, carefully remove parts from the plastic sprues. Avoid pulling or twisting, which can damage parts.
• Trim any excess plastic (flash) from the parts using a hobby knife or sandpaper. Be precise to ensure a good fit.
• Test fit parts before applying glue to ensure proper alignment.

4.3. مراحل مونتاژ

• Follow the numbered steps in the included instruction booklet.
• Apply a small amount of plastic cement to the mating surfaces of the parts. Hold them firmly together until the glue sets.
• Allow sufficient drying time for glued parts before proceeding to the next step.
• Pay close attention to the orientation of parts, especially for landing gear, wings, and cockpit components.

5. Painting and Decals

The EA-18G Growler kit offers options for different livery versions. Refer to the instruction booklet for specific paint codes and decal placement for your chosen version. The following images illustrate some of the available schemes and their recommended colors.

5.1. Painting Guidelines

• Clean the model surface before painting to remove dust or grease.
• Apply paint in thin, even coats to avoid obscuring details. Allow each coat to dry completely before applying the next.
• Use masking tape for sharp lines between different colors.

5.2. برنامه برگردان

• Cut out each decal individually, close to the edge of the design.
• Dip the decal in lukewarm water for a few seconds until it slides freely on its backing paper.
• Carefully slide the decal onto the model surface using tweezers or a brush.
• Position the decal correctly and gently blot away excess water with a soft cloth or tissue.
• Allow decals to dry completely before applying a clear coat if desired.

5.3. Livery Options

Image: Paint scheme for Version B - Boeing EA-18G Growler, s/n 168274, U.S. Navy VAQ-137 "Rooks" NAS Whidbey Island, Washington State, 2018. Recommended colors include Light Compass Ghost Gray (F.S. 36375), Dark Compass Ghost Gray (F.S. 36320), and Gun Metal (F.S. 37200).

Image: Paint scheme for Version A - Boeing EA-18G Growler, s/n 168765, U.S. Navy VAQ-134 "Garudas" NAS Whidbey Island, Washington State, 2017. Recommended colors include Light Compass Ghost Gray (F.S. 36375), Dark Compass Ghost Gray (F.S. 36320), Flat Gull Gray (F.S. 36622), and Gun Metal (F.S. 37200).

Image: Paint scheme for Version C - Boeing EA-18G Growler, A46-06 R.A.A.F. 6th Squadron, 100th Anniversary livery, Amberley AB, 2017. Recommended colors include Light Compass Ghost Gray (F.S. 36375), Dark Compass Ghost Gray (F.S. 36320), Blue Angels Blue (F.S. 15050), and Gun Metal (F.S. 37200).

6. مشخصات

7 عیب یابی

Encountering issues during model assembly is common. Here are some general troubleshooting tips:

• قطعات نامناسب: Ensure all flash is removed and parts are correctly oriented. Light sanding or filing may be necessary for a snug fit.
• Decals Not Adhering: Ensure the surface is clean and smooth. A decal setting solution can help decals conform to irregular surfaces.
• مشکلات رنگ‌آمیزی: If paint is clumping or uneven, ensure it is properly thinned and applied in thin coats. Allow sufficient drying time between coats.
• قطعات گم شده/آسیب دیده: Refer to the manufacturer's contact information for assistance with replacement parts.

8. تعمیر و نگهداری

Once assembled and painted, your model requires minimal maintenance to preserve its appearance:

• تمیز کردن: Dust your model regularly with a soft, dry brush or a can of compressed air. Avoid using harsh chemicals or abrasive materials.
• نمایش: Display your model in a stable location away from direct sunlight, extreme temperatures, and high humidity to prevent fading, warping, or damage to decals.
• رسیدگی: Handle the model carefully, grasping it by sturdy sections to avoid breaking delicate parts.

9. گارانتی و پشتیبانی

For specific warranty information regarding your Italeri EA-18G Growler 1:48 Plastic Model Kit, please refer to the documentation included in the product packaging or visit the official Italeri webسایت

If you require technical assistance, have questions about assembly, or need to report missing/damaged parts, please contact Italeri customer support directly. Contact details can typically be found on the product box or the manufacturer's webسایت