Italeri AMX Ghibli 1:72 Scale Model Kit Instruction Manual

مقدمه

This instruction manual provides general guidance for the assembly, painting, and care of your Italeri AMX Ghibli 1:72 scale model kit. For detailed, step-by-step assembly instructions specific to this model, please refer to the instruction sheet included within your product packaging. This manual serves as a supplementary guide to ensure a successful and enjoyable modeling experience.

اطلاعات ایمنی

WARNING: SMALL PARTS. Not suitable for children under 3 years due to small parts which may present a choking hazard.

Always use modeling tools safely and under adult supervision if applicable. Ensure proper ventilation when using paints, glues, and thinners. Keep all modeling materials out of reach of young children and pets.

محتویات بسته

Your Italeri AMX Ghibli model kit (Model 1460) typically includes the following components:

• Plastic sprues containing all model parts
• Clear plastic parts for canopy and lights
• Decal sheet for markings and insignia
• جزوه آموزشی دقیق
• Color painting guide

Please verify all parts are present and undamaged before beginning assembly. If any parts are missing or damaged, contact your retailer or Italeri customer support.

دستورالعمل مونتاژ

Building a model kit requires patience and attention to detail. Refer to the specific instruction booklet provided in your kit for precise assembly steps, part numbers, and diagrams.

مراحل مجمع عمومی:

1. آماده سازی: Carefully remove parts from the sprues using a hobby knife or sprue cutters. Clean any flash or mold lines with a sanding stick or fine sandpaper.
2. مجامع فرعی: Begin by assembling smaller components such as the cockpit, landing gear, and weapon pylons as indicated in the instructions.
3. مونتاژ بدنه: Join the main fuselage halves, ensuring proper alignment. Use plastic cement sparingly to avoid damaging surface details.
4. مجموعه بال و دم: Attach the wings and tailplanes to the fuselage. Pay close attention to dihedral angles if specified.
5. جزئیات: Add smaller details like antennas, pitot tubes, and clear canopy parts. Mask the canopy before painting.
6. Weapons and External Stores: Assemble and attach any bombs, missiles, or fuel tanks.

The images below illustrate the completed Italeri AMX Ghibli model, showcasing the level of detail and finish achievable with careful assembly and painting.

تصویر ۱: جلو-راست view of the assembled Italeri AMX Ghibli model, highlighting the cockpit, landing gear, and various armaments attached to the wings.

تصویر ۵.۱: کنار view of the assembled Italeri AMX Ghibli model, providing a clear perspective of the fuselage, engine exhaust, and wing structure.

Image 3: Rear-left view of the assembled Italeri AMX Ghibli model, focusing on the tail fin, engine exhaust nozzle, and rear fuselage details.

Painting and Decals

After assembly, prepare your model for painting. Clean the surface to remove any dust or grease. Apply primer for better paint adhesion. Follow the painting guide included in your kit for accurate color schemes and camouflage patterns.

• نقاشی: Apply thin coats of model paint, allowing each coat to dry thoroughly. Use appropriate paints for plastic models (e.g., acrylics, enamels).
• دکمه ها: Once painting is complete and fully dry, apply a gloss clear coat. Carefully cut out decals, dip them in water, and slide them onto the model. Use decal setting solutions to help them conform to surface details.
• اتمام: After decals are dry, apply a final matte or satin clear coat to protect the finish and unify the appearance.

تعمیر و نگهداری

Once your model is complete, proper care will ensure its longevity and appearance.

• تمیز کردن: Dust your model regularly with a soft brush or a can of compressed air. Avoid using harsh chemicals or abrasive materials.
• نمایش: Display your model in a stable, dust-free environment, away from direct sunlight and extreme temperature changes, which can cause plastic to warp or paint to fade.
• رسیدگی: Handle the model by its sturdy parts, such as the fuselage or wings, to avoid breaking delicate components like antennas or landing gear.

عیب یابی

Common issues encountered during model building and their potential solutions:

• قطعات مناسب نیستند: Ensure all sprue gates are fully removed and check for any excess plastic (flash). Light sanding may be required.
• Gaps between parts: Use plastic filler putty to fill gaps, then sand smooth before painting.
• Paint issues (e.g., brush strokes, uneven finish): Apply paint in thin, multiple coats. Ensure paint is properly thinned. Practice on scrap plastic.
• Decals silvering (air trapped under decal): Ensure the surface is glossy before applying decals. Use decal setting solutions to help decals conform and eliminate air bubbles.

مشخصات

گارانتی و پشتیبانی

For specific warranty information or customer support regarding your Italeri AMX Ghibli model kit, please refer to the documentation included in your product packaging or visit the official Italeri website. Contact your retailer for assistance with any missing or defective parts.