Perlegear PGTVMC15 Mobile TV Stand Instruction Manual

1. مقدمه

Thank you for choosing the Perlegear PGTVMC15 Mobile TV Stand. This manual provides essential information for the safe and correct assembly, operation, and maintenance of your new TV stand. Please read these instructions carefully before installation and retain them for future reference.

The Perlegear PGTVMC15 is a versatile mobile TV stand designed to accommodate 37-75 inch televisions weighing up to 40kg. It features a reinforced glass base for stability and a sleek aesthetic, 360-degree rotating casters with locking mechanisms for easy movement and secure positioning, 6-level height adjustment, and a ±35-degree swivel function for optimal viewing angles. Its design is suitable for various environments, including homes, schools, hospitals, and business displays.

اطلاعات ایمنی

• تمام دستورالعمل ها را بخوانید: Ensure you understand all assembly and operating instructions before use.
• ظرفیت وزنی: Do not exceed the maximum load capacity of 40kg (88 lbs). Overloading can result in serious injury or property damage.
• اندازه تلویزیون: این پایه برای تلویزیون‌های بین ۲۷ تا ۶۰ اینچ طراحی شده است.
• سازگاری با VESA: Ensure your TV's VESA mounting pattern is within the range of 200x100mm to 600x400mm.
• مونتاژ: Assemble the product exactly as instructed. Improper assembly may lead to instability.
• کاستورها: همیشه وقتی پایه در حالت ثابت است، چرخ‌ها را قفل کنید تا از حرکت تصادفی جلوگیری شود.
• کودکان: Keep children away from the TV stand during assembly and ensure the TV is securely mounted to prevent tipping.

2. محتویات بسته

Please verify that all components listed below are present and undamaged. If any parts are missing or damaged, please contact Perlegear customer support.

بسته به طور معمول شامل:

• Main support column
• Reinforced glass base
• براکت‌های نصب تلویزیون
• Adjustable media shelf
• Casters with locking mechanism
• Hardware kit (various screws, washers, spacers for TV mounting and stand assembly)
• دستورالعمل مونتاژ

3. مشخصات

شکل 3.1: Detailed dimensions of the Perlegear PGTVMC15 TV Stand. This diagram provides precise measurements of the TV stand, including its overall height (up to 129cm), base dimensions (60cm x 40cm), and shelf size, aiding in planning your setup.

4. راه اندازی و مونتاژ

Follow these steps to assemble your Perlegear PGTVMC15 Mobile TV Stand. It is recommended to have two people for assembly, especially when mounting the TV.

4.1 Pre-Assembly Check

• تمام قطعات را از بسته‌بندی خارج کرده و آنها را روی یک سطح نرم و تمیز قرار دهید تا از خراشیدگی جلوگیری شود.
• Verify all parts are present against the package contents list.
• Ensure your TV meets the size (37-75 inches), weight (max 40kg), and VESA compatibility (200x100mm to 600x400mm) requirements.

شکل 4.1: TV compatibility guidelines. This image illustrates the compatibility of the TV stand, supporting televisions from 37 to 75 inches, with a maximum weight of 40kg. It is compatible with VESA mounting patterns ranging from 200x100mm to 600x400mm.

۵.۲ مراحل مونتاژ (کلیات)view)

1. چرخ‌ها را به پایه وصل کنید: Secure the casters to the reinforced glass base using the provided hardware. Ensure locking casters are positioned correctly.
2. Assemble Support Column: Connect the main support column sections as per the detailed instructions in your package.
3. اتصال ستون به پایه: Secure the assembled support column to the glass base.
4. Install Media Shelf: Attach the adjustable media shelf to the support column at your desired height.
5. براکت‌های تلویزیون را به تلویزیون وصل کنید: Secure the TV mounting brackets to the back of your television using the appropriate screws, washers, and spacers from the hardware kit. Ensure the brackets are level and securely fastened.
6. نصب تلویزیون روی پایه: With assistance, carefully lift the TV and hook the TV brackets onto the mounting plate of the stand. Secure the TV in place using the safety screws or locking mechanisms.

شکل 4.2: The Perlegear PGTVMC15 Mobile TV Stand fully assembled with a television mounted.

5. دستورالعمل های عملیاتی

5.1 تنظیم ارتفاع

The TV stand allows for 6 levels of height adjustment to achieve your preferred viewing height. To adjust the height:

1. مطمئن شوید که تلویزیون به طور ایمن نصب شده است.
2. Locate the pull-pin mechanism on the main support column.
3. Pull the pin outwards to disengage the locking mechanism.
4. Carefully slide the TV mounting plate up or down to the desired height.
5. Release the pin, ensuring it fully engages into one of the adjustment holes to lock the height securely.

شکل 5.1: Height adjustment mechanism. The stand offers 6 levels of height adjustment, allowing the TV to be positioned between 104cm and 129cm (from the center of the mounting plate to the floor surface). Adjustment is made using a convenient pull-pin mechanism.

۵.۳ عملکرد چرخشی

The TV stand allows for a ±35-degree swivel (left or right) to optimize your viewزاویه

• Gently grasp the sides of your TV.
• Carefully rotate the TV to the desired left or right angle within the 35-degree range.
• No locking mechanism is required for swivel; the friction holds the TV in place.

شکل 5.2: Swivel function. The TV stand features a ±35-degree swivel function, enabling you to adjust the viewزاویه برای راحتی viewing from various positions in the room.

5.3 Mobility and Caster Usage

The integrated casters allow for easy movement of the TV stand. Each caster is equipped with a locking mechanism.

• برای حرکت: Unlock all casters by flipping their levers upwards. Gently push the stand to its new location.
• برای ایمن سازی: Once in the desired position, lock all casters by flipping their levers downwards to prevent accidental movement.

شکل 5.3: Casters with locking mechanism. Equipped with smooth-rolling casters, this stand is suitable for various floor types including wood, carpet, and tile. The casters are designed for quiet operation and include locking mechanisms for stability.

6. تعمیر و نگهداری

• تمیز کردن: استفاده از نرم، دamp cloth to clean the surfaces of the stand. Avoid abrasive cleaners or solvents that could damage the finish or glass.
• بررسی های منظم: به صورت دوره‌ای تمام پیچ‌ها و اتصالات را بررسی کنید تا مطمئن شوید که محکم و ایمن هستند. در صورت لزوم، آنها را دوباره محکم کنید.
• مراقبت از کاستور: Keep the casters free of debris to ensure smooth movement.

7 عیب یابی

7.1 Stand is Unstable

• بررسی اتصالات: مطمئن شوید که تمام پیچ ها و پیچ ها به طور ایمن سفت شده اند.
• سطح سطح: مطمئن شوید که پایه روی یک سطح صاف و تراز قرار گرفته است.
• محدودیت وزن: Confirm your TV's weight does not exceed the 40kg (88 lbs) maximum load capacity.

7.2 Difficulty Moving the Stand

• باز کردن قفل چرخ‌ها: Ensure all casters are in the unlocked position.
• بررسی وجود آوار: Clear any hair, dust, or debris from the caster wheels.

۷.۱ تلویزیون تراز نیست

• Re-adjust Brackets: Loosen the TV mounting screws slightly, adjust the TV to be level, and then retighten the screws.
• Check Stand Assembly: Ensure the main column and mounting plate are assembled correctly and are level.

8. گارانتی و پشتیبانی

Perlegear products are manufactured with quality and durability in mind. For specific warranty information, please refer to the warranty card included in your package or visit the official Perlegear webسایت

If you encounter any issues or have questions regarding your Perlegear PGTVMC15 Mobile TV Stand, please contact our customer support team. Our representatives are available to assist you with troubleshooting, parts replacement, or any other product-related inquiries.

اطلاعات تماس: Please refer to the contact details provided on the Perlegear official webبرای دریافت به‌روزترین اطلاعات پشتیبانی، به سایت یا بسته‌بندی محصول خود مراجعه کنید.