Vente-unique TYRAL Hydromassage Shower Cabin Instruction Manual

1. مقدمه

Thank you for choosing the Vente-unique TYRAL Hydromassage Shower Cabin. This manual provides essential information for the safe installation, operation, and maintenance of your new shower cabin. Please read these instructions carefully before assembly and use, and retain them for future reference.

2. اطلاعات ایمنی

• برای جلوگیری از نشتی و آسیب ناشی از آب، مطمئن شوید که تمام اتصالات آب‌بندی شده‌اند.
• Installation should be performed by individuals with appropriate technical knowledge, following local plumbing and electrical codes.
• Do not use abrasive cleaners or harsh chemicals on glass or acrylic surfaces, as this may cause damage.
• Verify that the floor can support the weight of the shower cabin when filled with water and a user.
• Keep children supervised when near the shower cabin.

3. محتویات بسته

Before beginning assembly, ensure all components are present and undamaged. The package includes:

• TYRAL Hydromassage Shower Cabin structure (tempered glass panels, metal frame, acrylic ABS base)
• Tropical rain showerhead
• Multi-function hand shower with hose
• Single-lever mixer tap
• 6 hydromassage jet zones (each with 3 micro-jets)
• قفسه شیشه ای
• دستگیره های در
• مونتاژ تخلیه
• شیلنگ های اتصال
• Mounting hardware (screws, knobs, etc.)

4. راه اندازی و نصب

Assembly of the Vente-unique TYRAL Hydromassage Shower Cabin is required. The design allows for reversible installation to suit your bathroom layout.

4.1 آماده سازی سایت

• Ensure the installation area has a level floor and adequate water supply and drainage connections.
• Confirm sufficient space for the shower cabin (90 cm length x 70 cm width x 212 cm height).

۳.۲ مراحل مونتاژ (دستورالعمل‌های کلی)

1. نصب پایه: Position the acrylic ABS base on the prepared, level surface. Connect the drain assembly to your bathroom's drainage system.
2. مونتاژ قاب: Assemble the metal frame components according to the detailed diagrams provided in the separate assembly guide.
3. نصب پنل: Carefully install the 5mm thick tempered glass back panels and fixed side panels into the frame.
4. نصب درب: Mount the 5mm thick tempered glass sliding doors. Ensure they slide smoothly and seal properly when closed. Attach the door handles.
5. اتصالات لوله کشی: Connect the water supply lines to the single-lever mixer tap. Install the tropical rain showerhead, multi-function hand shower, and hydromassage jets. Ensure all connections are tightened and sealed to prevent leaks.
6. بررسی های نهایی: Before first use, run water through all functions to check for leaks and proper operation of all components.

Figure 1: The shower cabin base with sliding doors. Note the central drain and textured anti-slip surface.

Figure 2: Ergonomic chrome handles for the sliding shower doors.

5. دستورالعمل های عملیاتی

The TYRAL Hydromassage Shower Cabin offers multiple functions for a customized showering experience.

5.1 کنترل آب

• The single-lever mixer tap controls water flow and temperature. Move the lever left or right to adjust temperature, and up or down to adjust flow.
• The tap typically has 3 settings to direct water to the desired outlet: tropical rain shower, hand shower, or hydromassage jets.

5.2 Shower Functions

• Tropical Rain Shower: Select this setting on the mixer tap for a wide, gentle overhead spray.
• Multi-function Hand Shower: Select this setting to use the flexible hand shower. Adjust the spray pattern by rotating the showerhead face.
• Hydromassage Jets: Select this setting to activate the 6 hydromassage jet zones, each featuring 3 micro-jets for a targeted massage.

شکل ۵.۴: سربار view of the shower cabin, highlighting the tropical rain showerhead and the mounted hand shower.

Figure 4: Interior panel showing the arrangement of hydromassage jets, the single-lever mixer tap, and the hand shower connection.

شکل 5: با جزئیات view of the individual hydromassage jets and the flexible hose connection for the hand shower.

Figure 6: The multi-function hand shower, designed for various spray patterns.

6. تعمیر و نگهداری

Regular cleaning and maintenance will ensure the longevity and optimal performance of your shower cabin.

• نظافت روزانه: After each use, rinse the interior surfaces with clean water to remove soap residue. Use a soft cloth or squeegee to wipe down glass panels to prevent water spots.
• نظافت هفتگی: Clean all surfaces (glass, acrylic, chrome) with a mild, non-abrasive bathroom cleaner. Avoid cleaners containing ammonia, bleach, or abrasive particles, as these can damage finishes.
• Jet and Showerhead Maintenance: Periodically check the hydromassage jets and showerheads for mineral buildup. Clean any clogged nozzles using a soft brush or by soaking in a descaling solution if necessary.
• تمیز کردن فاضلاب: Regularly remove and clean the drain trap to prevent blockages.

Figure 7: The internal glass shelf, suitable for storing shower essentials. Clean regularly to prevent soap scum buildup.

7 عیب یابی

This section addresses common issues you might encounter with your shower cabin.

8. مشخصات

9. گارانتی و پشتیبانی

Your Vente-unique TYRAL Hydromassage Shower Cabin is covered by a 30-day refund/replacement policy from the date of purchase. For specific warranty details, claims, or technical support, please contact the seller directly.

فروشنده: Vente unique ES

Seller Support Link: Contact Vente unique ES

You can also visit the official Vente-unique brand store for more information and products: Vente-unique Brand Store