Absima CR4S V2 2.4Ghz Radio System

1. مقدمه

ممنون از خریدتونasing the Absima CR4S V2 2.4Ghz Radio System. This 4-channel pistol grip remote control system is designed for reliable and precise operation of your remote-controlled vehicles. It features a robust design and includes a "beginner mode" for ease of use, making it suitable for users of all experience levels.

2. اقدامات احتیاطی ایمنی

• Always operate your RC vehicle in a safe and responsible manner.
• Ensure batteries are correctly installed and charged before use.
• Do not expose the radio system to water or extreme temperatures.
• Keep the system away from small children to prevent accidental ingestion of small parts.
• Turn off the receiver first, then the transmitter, when finished operating. Turn on the transmitter first, then the receiver, when starting operation.

3. محتویات بسته

The Absima CR4S V2 2.4Ghz Radio System package includes the following components:

• Absima CR4S V2 2.4Ghz Transmitter (TX)
• Absima 2.4Ghz Receiver (RX)

4. محصول تمام شدview

Familiarize yourself with the main components of your Absima CR4S V2 radio system.

Figure 4.1: Absima CR4S V2 Transmitter (left) and Receiver (right).

شکل 4.2: با جزئیات view of the Absima CR4S V2 Transmitter's control panel, showing various adjustment knobs and switches.

4.1 فرستنده (TX)

• فرمان: Controls the left and right steering of the vehicle.
• ماشه دریچه گاز: Controls forward and reverse movement. Pull for forward, push for reverse/brake.
• CH3/CH4 Buttons/Switches: Auxiliary channels for controlling additional functions on your vehicle (e.g., lights, winches), if supported.
• تنظیمات تریم: Dials or sliders for fine-tuning steering and throttle neutral positions.
• سوئیچ قدرت: فرستنده را روشن/خاموش می کند.
• محفظه باتری: Located at the bottom of the handle, for installing alkaline batteries.

4.2 گیرنده (RX)

• آنتن: Receives signals from the transmitter. Ensure it is properly positioned.
• Channel Ports: Connectors for steering servo, throttle ESC, and auxiliary channels (CH3, CH4).
• دکمه اتصال: Used to pair the receiver with the transmitter.

5. راه اندازی

5.1 نصب باتری فرستنده

1. Locate the battery compartment cover on the bottom of the transmitter handle.
2. درپوش را بلغزانید.
3. Insert the required alkaline batteries (not included) according to the polarity markings (+/-).
4. درپوش محفظه باتری را محکم ببندید.

5.2 Receiver Installation and Connection

1. Mount the receiver securely in your RC vehicle, away from electrical interference.
2. Connect the steering servo to the "CH1" port on the receiver.
3. Connect the Electronic Speed Controller (ESC) to the "CH2" port on the receiver.
4. Connect any auxiliary components (e.g., lights) to "CH3" or "CH4" ports as needed.
5. Ensure the receiver antenna is extended and positioned correctly for optimal signal reception.

۳.۳ اتصال فرستنده و گیرنده

Binding is the process of linking the transmitter and receiver so they communicate exclusively with each other.

1. Ensure the transmitter is turned OFF.
2. Connect a bind plug (if supplied with your vehicle's ESC or receiver) to the "BIND" port on the receiver.
3. Power on the RC vehicle (which powers the receiver). The receiver's LED should flash, indicating it's in bind mode.
4. While holding down the bind button on the transmitter (refer to transmitter diagram for location), turn on the transmitter.
5. Release the bind button on the transmitter once its LED indicates a successful connection (usually a solid light).
6. Turn off the receiver, then the transmitter.
7. پلاگین اتصال را از گیرنده جدا کنید.
8. Turn on the transmitter first, then the receiver. The receiver's LED should now be solid, indicating a successful bind.

6. عملیاتی

6.1 Power On/Off Sequence

• روشن کردن: Turn on the transmitter first, then power on your RC vehicle (receiver).
• برای خاموش کردن: Power off your RC vehicle (receiver) first, then turn off the transmitter.

6.2 کنترل های اساسی

• فرمان: برای کنترل جهت حرکت خودرو، فرمان را به چپ یا راست بچرخانید.
• دریچه گاز: Pull the trigger towards you for forward movement. Push the trigger away from you for reverse or braking.
• Auxiliary Channels (CH3/CH4): Use the corresponding buttons or switches on the transmitter to activate functions connected to these channels on your vehicle.

6.3 حالت مبتدی

The Absima CR4S V2 features a "beginner mode" which limits the maximum throttle output, making the vehicle easier to control for new users or children. Refer to your transmitter's specific controls for activating and deactivating this mode. This mode helps in learning to drive without overwhelming power.

7. تعمیر و نگهداری

• Keep the transmitter and receiver clean and free from dust and dirt. Use a soft, dry cloth for cleaning.
• Avoid exposing the system to direct sunlight or high humidity for extended periods.
• اگر برای مدت طولانی از فرستنده استفاده نمی‌شود، باتری‌ها را از آن خارج کنید تا از نشتی جلوگیری شود.
• Regularly check all connections for security and wear.

8 عیب یابی

9. مشخصات

• شماره مدل: 2000010
• کانال ها: 4
• فرکانس: 2.4 گیگاهرتز
• ابعاد فرستنده: تقریباً 9 × 2 × 36 سانتی متر
• وزن: Approximately 130 g (Transmitter only, without batteries)
• مواد: پلاستیک
• رنگ: مشکی
• Batteries Required (Transmitter): Yes (Alkaline, not included)
• مونتاژ مورد نیاز: خیر

10. گارانتی

Absima products are manufactured to high quality standards. This product is covered by a manufacturer's warranty against defects in materials and workmanship. Please retain your proof of purchase for warranty claims. For specific warranty terms and conditions, refer to the documentation provided with your purchase or visit the official Absima webسایت

11. پشتیبانی

For technical assistance, troubleshooting, or spare parts inquiries, please contact your local Absima dealer or visit the official Absima support website. Online resources, FAQs, and contact information can typically be found there.