Bestier Nightstand with Drawer and Shelf (Model: Trapezoid)

مقدمه

This manual provides detailed instructions for the assembly, operation, and maintenance of your Bestier Nightstand with Drawer and Shelf. Designed for small spaces, this modern side table features a smooth-gliding drawer, an open shelf, and a sturdy structure made of scratch-resistant, heat-resistant, and waterproof veneered MDF with reinforced metal legs. Please read these instructions carefully before assembly and use to ensure proper function and longevity of your product.

اطلاعات ایمنی

• برای جلوگیری از خراش، همیشه محصول را روی یک سطح نرم و تمیز مونتاژ کنید.
• قبل از استفاده، مطمئن شوید که همه قطعات محکم بسته شده‌اند. پیچ‌ها را بیش از حد سفت نکنید.
• هنگام مونتاژ قطعات کوچک را از کودکان دور نگه دارید.
• روی پاتختی نایستید یا ننشینید.
• Distribute weight evenly on the tabletop and shelves. The tabletop load bearing capacity is up to 40 lbs.

محتویات بسته

Before beginning assembly, verify that all components listed below are present and undamaged. If any parts are missing or damaged, please contact Bestier customer service.

• پنل رومیزی
• پنل‌های کناری (2)
• پانل قفسه پایین
• پنل جلویی کشو
• پنل‌های کناری کشو (2)
• پنل پشت کشو
• پنل پایین کشو
• Metal Legs (4)
• دسته کشو
• Hardware Pack (screws, cam locks, dowels, drawer slides, etc.)
• ابزار مونتاژ (آچار آلن)

دستورالعمل مونتاژ

Follow these steps carefully for proper assembly. It is recommended to have one person for assembly.

Step 1: Attach Drawer Slides to Side Panels

Identify the two side panels. Attach the drawer slides to the designated pre-drilled holes on the inner sides of these panels using the provided screws. Ensure the slides are oriented correctly for smooth drawer operation.

مرحله 2: فریم اصلی را مونتاژ کنید

Connect the side panels to the tabletop panel and the bottom shelf panel using cam locks and dowels. Ensure all connections are snug and secure. The trapezoid design of the side panels should be oriented as shown in the product images for stability.

Step 3: Attach Metal Legs

Secure the four metal legs to the bottom of the main frame using the provided screws. Ensure the legs are firmly attached and stable.

Image: The Bestier Nightstand with its metal legs securely attached, ready for use. This image shows the overall structure of the nightstand with its distinctive leg design.

Step 4: Assemble the Drawer

Connect the drawer side panels, back panel, and bottom panel to the drawer front panel. Attach the remaining drawer slides to the sides of the assembled drawer. Finally, attach the drawer handle to the front panel.

تصویر: نمای نزدیک view of the square metal drawer handle, highlighting its design and attachment point on the drawer front.

Step 5: Insert the Drawer

Carefully align the drawer slides on the drawer with the slides on the main frame and gently push the drawer into place until it clicks securely.

Image: The Bestier Nightstand with its drawer partially open, revealing the interior storage space. A book and a pen holder are visible inside the drawer.

دستورالعمل های عملیاتی

با استفاده از کشو

The nightstand features a smooth-gliding drawer. To open, gently pull the handle. To close, push the drawer firmly until it is fully recessed. Avoid forcing the drawer if it encounters resistance.

Utilizing the Open Shelf

The open shelf below the drawer provides additional storage or display space. It is suitable for books, magazines, small decorative items, or electronic devices. Ensure items placed on the shelf do not exceed its weight capacity or obstruct the drawer's movement.

نگهداری و مراقبت

• تمیز کردن: سطوح را با نرم، دamp پارچه. از مواد شیمیایی قوی یا پاک‌کننده‌های ساینده خودداری کنید، زیرا این مواد می‌توانند به روکش آسیب بزنند.
• نشت: Immediately wipe up any spills to prevent water damage to the veneered MDF. The material is water-resistant but not waterproof for prolonged exposure.
• حفاظت در برابر حرارت: While the surface is heat-resistant, it is recommended to use coasters under hot items to prevent potential damage.
• بررسی پایداری: به صورت دوره‌ای تمام پیچ‌ها و بست‌ها را بررسی کنید تا از سفت بودن آنها اطمینان حاصل شود. در صورت لزوم، آنها را دوباره سفت کنید، اما بیش از حد سفت نکنید.
• قرار دادن: Avoid placing the nightstand in direct sunlight or near heat sources to prevent warping or fading.

Image: Icons illustrating key features: anti-scratching, waterproof, easy assembly, and heat resistant, emphasizing the durability and convenience of the nightstand.

عیب یابی

مشخصات

Image: A detailed diagram illustrating the dimensions of the Bestier Nightstand, including height, width, and depth of the overall unit, drawer, and shelf.

• برند: بهترین
• نام مدل: ذوزنقه
• ابعاد محصول (کلی): 14.6 اینچ × 17.13 اینچ × 24.02 اینچ
• وزن مورد: 18.52 پوند
• جنس قاب: Manufactured Wood, Steel, Particle Board/Chipboard
• نوع مواد برتر: چوب مهندسی شده
• رنگ: مشکی
• تعداد کشوها: 1
• Tabletop Load Bearing Capacity: تا 40 پوند
• مونتاژ مورد نیاز: بله (شامل تمام ابزارهای مونتاژ)

گارانتی و پشتیبانی

This Bestier Nightstand comes with an گارانتی 18 ماهه. Bestier is committed to providing professional after-sale service and lifetime product support. If you have any questions, concerns, or require assistance with assembly or parts, please do not hesitate to contact our service team. Refer to your purchase documentation for specific contact information.