FLAMMA FC02 Mini Reverb Pedal Instruction Manual

1. مقدمه

The FLAMMA FC02 Mini Reverb Pedal is a compact digital guitar effects pedal designed to add rich, ambient reverb to your sound. It features three distinct reverb effects and intuitive controls, all housed in a durable metal casing. This manual provides essential information for setting up, operating, and maintaining your FC02 pedal.

Image 1.1: The FLAMMA FC02 Mini Reverb Pedal, showcasing طراحی جمع و جور و چیدمان کنترل آن.

2. ویژگی ها

• Three Reverb Effects: Choose between Studio, Church, and Plate reverb types.
• دور زدن واقعی: Ensures your guitar signal remains unaltered when the pedal is disengaged.
• طراحی فشرده: Mini pedal size for efficient pedalboard space utilization.
• ساخت و ساز بادوام: Full metal casing with a frosted texture for longevity.
• کنترل های بصری: DECAY, MIX, and TONE knobs for precise sound shaping.

Image 2.1: Visual representation of the three distinct reverb effects available on the FC02 pedal.

3. کنترل ها و اتصالات

Familiarize yourself with the pedal's controls and connection points:

Image 3.1: Detailed diagram of the FC02 pedal's controls and connection points.

1. کلید پا: Engages or disengages the effect.
2. نشانگر LED: وقتی افکت فعال باشد، روشن می‌شود.
3. دستگیره میکس: Adjusts the blend between the dry (unaffected) and wet (effected) signal.
4. دستگیره پوسیدگی: Controls the length or duration of the reverb tail.
5. جک ورودی: 1/4 inch (6.35mm) mono audio input for your instrument.
6. Reverb Type Switch: Selects between Studio, Church, and Plate reverb effects.
7. جک خروجی: 1/4 inch (6.35mm) mono audio output to your amplifier or next pedal.
8. دکمه TONE: Adjusts the tonal character of the reverb effect.
9. ورودی 9 ولت DC: Power supply connection (center negative, 9V DC, minimum 210mA).

4. راه اندازی

1. اتصال برق: Connect a 9V DC power adapter (center negative, minimum 210mA) to the DC 9V input jack. The power adapter is not included with the pedal.
2. اتصال ابزار: گیتار یا ساز دیگر خود را به آن وصل کنید جک ورودی using a 1/4 inch instrument cable.
3. Ampاتصال فایر: را وصل کنید جک خروجی به شما amplifier or the input of the next pedal in your signal chain using a 1/4 inch instrument cable.
4. قرار دادن زنجیره سیگنال: Reverb pedals are typically placed towards the end of your effects chain, after modulation and drive pedals, but before delay pedals if you prefer a distinct delay effect. Experiment with placement to find your preferred sound.

Image 4.1: The FC02 pedal connected in a typical guitar signal chain.

5. دستورالعمل های عملیاتی

1. Engaging/Disengaging the Effect: Press the footswitch to toggle the reverb effect on or off. The LED indicator will illuminate when the effect is active.
2. Selecting Reverb Type: Use the 3-way toggle switch to select your desired reverb effect:
   • استودیو: A versatile room reverb effect.
   • کلیسا: A large, expansive reverb with a deep, natural response.
   • بشقاب: A classic plate reverb simulation.
   

   Image 5.1: The reverb type selection switch.

3. Adjusting DECAY: را بچرخانید پوسیدگی knob clockwise to increase the length of the reverb tail, and counter-clockwise to shorten it.
   

   Image 5.2: Adjusting the DECAY knob.
4. Adjusting MIX: را بچرخانید مخلوط کنید knob to control the balance between your original guitar signal and the added reverb effect. A higher setting increases the reverb's prominence.
   

   Image 5.3: Adjusting the MIX knob.

5. Adjusting TONE: استفاده کنید لحن knob to shape the brightness or darkness of the reverb effect.

6. تعمیر و نگهداری

• تمیز کردن: برای تمیز کردن قسمت بیرونی پدال از یک پارچه نرم و خشک استفاده کنید. از پاک کننده ها یا حلال های ساینده خودداری کنید.
• ذخیره سازی: پدال را در محیط خشک و دور از دمای شدید و نور مستقیم خورشید نگهداری کنید.
• مراقبت از کابل: Ensure all cables are in good condition and properly connected to prevent signal loss or damage.
• منبع تغذیه: Always use a compatible 9V DC center-negative power supply to avoid damage to the unit.

7 عیب یابی

• بدون صدا:
  • تمام اتصالات کابل (ورودی، خروجی، برق) را بررسی کنید.
  • Ensure the power supply is correctly connected and providing the specified 9V DC.
  • تأیید کنید که ابزار شما و ampفیلتر به درستی کار می‌کند.
• صدای ضعیف یا تحریف شده:
  • یکپارچگی کابل را بررسی کنید.
  • Ensure the power supply meets the minimum current requirement (210mA).
  • Adjust the MIX and TONE knobs to ensure desired effect levels.
• نویز ناخواسته:
  • مطمئن شوید که از منبع تغذیه تنظیم‌شده استفاده می‌کنید.
  • Check for ground loops if using multiple pedals.
  • مطمئن شوید که همه کابل‌ها دارای محافظ و در وضعیت خوبی هستند.

8. مشخصات

Image 8.1: Physical dimensions of the FC02 pedal.

9. گارانتی و پشتیبانی

For detailed warranty information, product support, or service inquiries, please refer to the official FLAMMA website or contact FLAMMA customer service directly.

Visit the Official FLAMMA Store on Amazon