دفترچه راهنمای پایه چرخ اسکن گریپ

1. مقدمه و بیش ازview

The SCANGRIP WHEEL STAND is a robust and versatile accessory designed to enhance the mobility and positioning of your work lights in various professional environments, particularly workshops and detailing applications. This stand allows for precise illumination by offering adjustable height and easy maneuverability.

ویژگی های کلیدی عبارتند از:

• Extendable height from 3 ft to 6.2 ft (91 cm to 189 cm).
• Equipped with 5 wheels for improved safety, stability, and easy maneuverability.
• Two of the wheels are lockable to secure a safe and fixed position.
• Includes a flexible bracket for positioning a second work light, enabling illumination from below.
• Constructed from durable and sturdy powder-coated steel, suitable for both indoor and outdoor use.

Figure 1.1: The SCANGRIP WHEEL STAND with a work light mounted, demonstrating its full extension and stable base.

2. اطلاعات ایمنی

Please read all safety instructions carefully before assembling or operating the SCANGRIP WHEEL STAND. Failure to follow these instructions may result in injury or damage to the product.

• ثبات: Always ensure the stand is placed on a flat, stable surface. Uneven surfaces can cause the stand to tip over.
• قفل کردن چرخ ها: Always engage the wheel locks when the stand is in its desired position to prevent accidental movement.
• ظرفیت وزنی: Do not exceed the recommended weight capacity for attached work lights. Overloading can compromise stability.
• تنظیمات: When adjusting the height, ensure all locking mechanisms are securely tightened before leaving the stand unattended.
• حرکت: When moving the stand, ensure any attached lights are securely fastened and that the path is clear of obstructions. Roll the stand; do not lift it by the adjustable pole when assembled, as components may separate.
• نقاط نیشگون گرفتن: Be aware of pinch points when extending or collapsing the stand. Keep hands clear of moving parts.
• شرایط محیطی: While the stand is powder-coated for durability, avoid prolonged exposure to extreme weather conditions to maximize its lifespan.

3. محتویات بسته

پس از باز کردن بسته‌بندی، بررسی کنید که همه اجزا موجود و بدون آسیب باشند:

• Main telescopic pole assembly
• Base with 5 pre-installed wheels (2 with locks)
• Flexible bracket for second work light
• Mounting hardware for work lights (typically integrated with the stand's top mount and flexible bracket)

If any parts are missing or damaged, please contact Scangrip customer support.

4. راه اندازی و مونتاژ

The SCANGRIP WHEEL STAND is designed for straightforward assembly. Follow these steps:

1. Attach the Main Pole to the Base: Carefully insert the bottom end of the main telescopic pole into the central opening of the wheeled base. Ensure it is fully seated and secure. Tighten any securing knobs or bolts if present at the base connection point.


Figure 4.1: The sturdy five-wheel base, showing the central opening for the main pole and the lockable wheels.

2. Install the Flexible Bracket: The flexible bracket can be attached to the main pole at a desired height. Loosen the knob on the bracket, position it around the pole, and then tighten the knob to secure it firmly. This bracket is designed to hold a second work light, typically for lower illumination.

Figure 4.2: Attaching the flexible bracket to the main pole. Ensure the knob is tightened for security.
3. Mount Your Work Light(s): The top of the main pole and the flexible bracket are equipped with mounting points compatible with SCANGRIP work lights. Align your work light with the mounting pin and secure it according to the light's instructions. Ensure the light is firmly attached before use.


Figure 4.3: Mounting a work light onto the flexible bracket. The arrow indicates the downward motion to secure the light.

5. دستورالعمل های عملیاتی

Operating the SCANGRIP WHEEL STAND is intuitive, allowing for quick adjustments and positioning.

• تنظیم ارتفاع: To extend or retract the main pole, loosen the locking knobs located on the telescopic sections. Adjust the pole to the desired height (between 3 ft and 6.2 ft), then firmly tighten the locking knobs to secure the position.
• جابجایی پایه: To move the stand, ensure the wheel locks are disengaged. Gently push or pull the stand to its new location. The five-wheel design provides smooth and stable movement.
• موقعیت قفل: Once the stand is in its desired position, engage the two lockable wheels by pressing down on their respective levers. This will prevent the stand from rolling accidentally.
• Utilizing the Second Light Bracket: The flexible bracket can be rotated and adjusted along the main pole to direct a second work light precisely where needed, such as for illuminating lower areas of a vehicle.

Figure 5.1: The SCANGRIP WHEEL STAND in use, demonstrating its mobility and utility in a professional environment.

Figure 5.2: Practical application of the stand, providing optimal lighting for detailing tasks.

6. تعمیر و نگهداری

Regular maintenance will ensure the longevity and optimal performance of your SCANGRIP WHEEL STAND.

• تمیز کردن: پایه را با تبلیغ پاک کنیدamp برای پاک کردن گرد و غبار و کثیفی از پارچه استفاده کنید. از پاک‌کننده‌های ساینده یا حلال‌هایی که می‌توانند به روکش پودری آسیب بزنند، خودداری کنید.
• بازرسی: Periodically inspect all locking mechanisms, knobs, and wheel components for wear or damage. Ensure all connections are secure.
• روغن کاری: If the telescopic pole sections become stiff, apply a small amount of silicone-based lubricant to the sliding surfaces.
• ذخیره سازی: When not in use, store the stand in a clean, dry environment. It can be collapsed to its minimum height for more compact storage.

7 عیب یابی

This section addresses common issues you might encounter with your SCANGRIP WHEEL STAND.

8. مشخصات

• سازنده: منگوله
• شماره قطعه: 03.5682 SCANGRIP
• شماره مدل کالا: 03.5682
• وزن مورد: 14.52 پوند (6.59 کیلوگرم)
• ابعاد محصول: ۱۳ در ۵ در ۴ اینچ (۳۳ در ۱۲.۷ در ۱۰.۲ سانتی‌متر) - (Note: Dimensions likely refer to packaged or collapsed state)
• ارتفاع قابل افزایش: 3 ft to 6.2 ft (91 cm to 189 cm)
• پایان: روکش پودری
• مواد: فولاد
• منبع تغذیه: AC (refers to compatible lights, stand itself is passive)
• تعداد بسته اقلام: 1

9. گارانتی و پشتیبانی

SCANGRIP products are manufactured to high-quality standards. For specific warranty information regarding your SCANGRIP WHEEL STAND, please refer to the warranty card included with your purchase or visit the official Scangrip webسایت

For technical support, spare parts, or any inquiries not covered in this manual, please contact Scangrip customer service through their official channels. You can also visit the Scangrip Store on Amazon برای اطلاعات بیشتر در مورد محصول و منابع پشتیبانی.