مقدمه
The SHARP Digital Alarm Clock with AccuSet is designed for effortless timekeeping. Featuring automatic time setting, a clear LED display, and user-friendly controls, this clock is ideal for any bedroom. Its AccuSet technology ensures the time is always accurate, eliminating the need for manual adjustments, making it perfect for seniors, children, or anyone seeking a hassle-free alarm clock solution.
شکل 1: جلو view of the SHARP Digital Alarm Clock with green LED display.
ویژگی های کلیدی
- تنظیم خودکار زمان AccuSet: The clock is pre-programmed to automatically set the correct time, removing the need for manual adjustments. Simply select your time zone.
- تنظیم سریع ساعت تابستانی (DST): A convenient switch allows for easy adjustment for Daylight Savings Time (+1 hour) or Standard Time (-1 hour).
- کنترل دیمر بالا/پایین: Adjust the brightness of the LED display to your preference, ensuring comfortable viewروز یا شب
- پشتیبان گیری باتری: A pre-installed CR2032 button cell battery provides backup for time settings during power outages, ensuring continuous accuracy.
- انتخاب منطقه زمانی: Easily select your local time zone from the options provided at the bottom of the clock.
Figure 2: Diagram illustrating the key features and functionalities of the alarm clock.
راهنمای راه اندازی
- باز کردن بسته بندی: Carefully remove the alarm clock from its packaging.
- Battery Installation (Pre-installed): The CR2032 button cell battery for backup is pre-installed in a screw-secured cabinet at the bottom of the clock. This battery is designed to last for several years. No immediate action is required for initial setup.
- انتخاب منطقه زمانی: Before plugging in the clock, locate the time zone selection switch at the bottom of the unit. Select your correct time zone (e.g., EST, CST, MST, PST). The default time zone is Eastern Standard Time.
- اتصال برق: Plug the clock into an approved electrical source. The AccuSet feature will automatically program the correct time based on your selected time zone.
- Daylight Savings Time (DST) Adjustment: If applicable, slide the DST switch at the bottom of the clock to "ON" to add one hour (+1 hr) for Daylight Savings Time. For Standard Time, slide the switch to "OFF" to subtract one hour (-1 hr).
Figure 3: Top panel controls for setting time, alarm, and adjusting display.
دستورالعمل های عملیاتی
تنظیم زنگ هشدار
- را فشار دهید آلارم button once. The alarm time will appear on the display.
- در حالی که زمان زنگ هشدار نمایش داده می شود، دکمه را فشار دهید ساعت دکمه تنظیم ساعت زنگ هشدار.
- را فشار دهید دقیقه برای تنظیم دقیقه زنگ هشدار
- برای فعال یا غیرفعال کردن زنگ هشدار، دکمه هشدار روشن / خاموش button. An alarm indicator light (usually a small LED) will illuminate when the alarm is active.
- To return to the current time display, press the TIME button or wait a few seconds for it to revert automatically.
با استفاده از تابع Snooze
وقتی زنگ هشدار به صدا درآمد، دکمه بزرگ را فشار دهید چرت زدن button located on the top of the clock. This will temporarily silence the alarm for a set period (typically 9 minutes), allowing for extra rest. The alarm will sound again after the snooze period ends.
Adjusting Display Brightness (Dimmer Control)
The clock features a High/Low dimmer control to adjust the display brightness. Locate the DIMMER HI/LO button on the top panel. Press this button to toggle between high and low brightness settings to suit your environment and preference.
Figure 4: Illustration of the High & Low Display Dimmer Control.
تعمیر و نگهداری
- تمیز کردن: To clean the clock, use a soft, dry cloth. Do not use abrasive cleaners or solvents, as they may damage the finish.
- تعویض باتری: The CR2032 backup battery is designed for long-term use. If the clock loses time during a power outage after several years, it may be time to replace the battery. This is located in a screw-secured compartment at the bottom of the clock.
- قرار دادن: Place the clock on a stable, flat surface. Avoid placing it in direct sunlight, near heat sources, or in areas with high humidity.
عیب یابی
| مشکل | علت احتمالی | راه حل |
|---|---|---|
| Clock does not display time after plugging in. | Not connected to power, or power outlet is not active. | مطمئن شوید که سیم برق به طور ایمن به پریز برق فعال وصل شده است. |
| زمان نادرست است. | Incorrect time zone selected, or DST switch is set incorrectly. | Verify the time zone switch at the bottom of the clock is set to your local zone. Check the DST switch position. |
| صدای آژیر نمیآید. | Alarm is not activated, or alarm volume is too low (if adjustable). | Ensure the alarm is turned ON using the ALARM ON/OFF button. Check for an alarm indicator light. |
| صفحه نمایش خیلی روشن یا خیلی کم نور است. | تنظیم دیمر نیاز به تنظیم دارد. | Press the DIMMER HI/LO button to cycle through brightness settings. |
| ساعت هنگام قطع برق، زمان را از دست میدهدtage. | Backup battery is depleted. | Replace the CR2032 backup battery located in the compartment at the bottom of the clock. |
مشخصات
| ویژگی | جزئیات |
|---|---|
| نام تجاری | شارپ |
| شماره مدل | OZJONG |
| رنگ | Black - Green Led |
| نوع نمایشگر | دیجیتال |
| ویژگی های خاص | Alarm, Daylight Saving, Auto Dimmable |
| ابعاد محصول | ۶.۳ اینچ عرض × ۲.۷۲ اینچ ارتفاع |
| منبع تغذیه | سیم برقی، باطری |
| باتری پشتیبان | CR2032 (از پیش نصب شده) |
| مواد | پلاستیک |
| وزن مورد | 9.9 اونس |
| نوع نصب | رومیزی |
| UPC | 049353006079 |
Figure 5: Product dimensions for easy reference.
گارانتی و پشتیبانی
For warranty information or technical support, please refer to the contact details provided in your product packaging or visit the official Sharp webسایت رسید خرید خود را برای ادعای گارانتی نگه دارید.
