1. محصول تمام شدview
The BRESSER Beaufort 5-in-1 Wireless Weather Station Meteorological Center provides comprehensive weather data directly to your home. It includes an indoor display unit and a multi-sensor outdoor unit that measures temperature, humidity, wind speed, wind direction, and rainfall.

Image: The main display unit of the BRESSER Beaufort 5-in-1 Wireless Weather Station, showing indoor and outdoor temperature, humidity, wind data, forecast, barometric pressure, and time.
2. راه اندازی
۳.۱ باز کردن بستهبندی و بررسی قطعات
تمام اجزا را با دقت از بستهبندی خارج کنید و مطمئن شوید که موارد زیر وجود دارند:
- واحد نمایشگر اصلی
- 5-in-1 Outdoor Multi-Sensor Unit
- Mounting accessories (pole, base, screws)
- Power adapter for main unit
- راهنمای دستورالعمل
2.2 نصب باتری
واحد نمایشگر اصلی: Insert 1x CR2032 battery (not included) into the battery compartment for backup power. Connect the main unit to a power outlet using the provided adapter.
Outdoor Multi-Sensor Unit: Insert 3x AA batteries (not included) into the battery compartment of the outdoor sensor. Ensure correct polarity.
2.3 Outdoor Sensor Placement and Mounting
قرار دادن صحیح سنسور خارجی برای قرائت دقیق بسیار مهم است.
- Mount the sensor in an open area, away from obstructions like buildings or trees, to ensure accurate wind and rain measurements.
- Ensure the sensor is mounted level to guarantee accurate rainfall collection and wind direction.
- Orient the wind vane (the arrow) to point North during installation.
- Use the provided mounting pole and base to secure the sensor to a stable surface or pole.

تصویر: کنار view of the BRESSER 5-in-1 outdoor multi-sensor unit, showing the wind cups, wind vane, and rain collector.
۵.۳ همگامسازی اولیه
After installing batteries in both units, place them within close proximity. The main display unit will automatically search for and connect to the outdoor sensor. This process may take a few minutes. Once connected, outdoor data will appear on the display.
2.5 تنظیم زمان و تاریخ
The weather station may attempt to synchronize time via RCC (Radio Controlled Clock) signal. If an RCC signal is not available in your region, or if you prefer, you can manually set the time and date using the buttons on the main display unit. Refer to the specific button functions in the Operating section for detailed instructions.
۳. راهاندازی ایستگاه هواشناسی
3.1 نمایش بیش از حدview
The main display unit presents various weather parameters:
- خارج: دما و رطوبت در فضای باز.
- در: دما و رطوبت داخلی.
- باد: Current wind speed and direction, including gust speed.
- پیش بینی: Weather forecast icons (sunny, cloudy, rainy, etc.).
- بارو: قرائت فشار بارومتریک.
- RAINFALL: تجمع بارندگی روزانه، هفتگی یا ماهانه.
- TIME/DATE: زمان، تاریخ و روز هفته فعلی.
- BEAUFORT: Beaufort scale indicator for wind force.
- سرمازدگی باد: Calculated wind chill temperature.

تصویر: جلو view of the BRESSER Beaufort 5-in-1 Wireless Weather Station display, highlighting the various data fields and their arrangement.
3.2 توابع دکمه
The display unit features several buttons for navigation and settings:
- تاریخچه: View historical data for various parameters.
- حداکثر/دقیقه: Display maximum and minimum recorded values for temperature, humidity, etc. Press again to clear.
- نور: Adjust backlight brightness or activate temporary backlight.
- MODE/SET: Enter settings mode or confirm selections.
- فلشهای بالا/پایین: Navigate through menus or adjust values.
۵.۲ تنظیم هشدارها
You can set alarms for specific weather conditions, such as high/low temperature, high wind speed, or heavy rainfall. Enter the alarm setting mode using the MODE/SET button and follow the on-screen prompts to configure your desired alarm thresholds.
3.4 انتخاب واحد
To change units (e.g., Celsius to Fahrenheit, mph to km/h, inHg to hPa), access the settings menu. Navigate to the unit selection option and choose your preferred measurement units.
4. تعمیر و نگهداری
4.1 تعویض باتری
Replace batteries in the outdoor sensor when the low battery indicator appears on the main display. Due to the outdoor placement, ensure safe access for battery replacement. The main unit's backup battery should be replaced periodically, typically every 1-2 years.
4.2 تمیز کردن
Periodically clean the outdoor sensor unit to ensure accurate readings. Remove any debris from the rain collector, wind cups, and wind vane. Use a soft, damp cloth for cleaning; avoid abrasive cleaners or solvents. Clean the display unit with a soft, dry cloth.
4.3 مراقبت عمومی
Ensure the outdoor sensor is securely mounted and free from physical damage. Protect the main display unit from extreme temperatures, direct sunlight, and moisture.
5 عیب یابی
- No Display on Main Unit: Check power adapter connection and backup battery.
- بدون داده در فضای باز: Ensure outdoor sensor batteries are fresh and correctly installed. Verify both units are within range and attempt re-synchronization (refer to setup instructions). Check for obstructions between units.
- قرائت های نادرست: Ensure the outdoor sensor is mounted correctly (level, clear of obstructions, wind vane pointing North). Clean sensors if necessary.
- زمان/تاریخ نادرست است: If RCC synchronization fails, manually set the time and date.
6. مشخصات
| ویژگی | جزئیات |
|---|---|
| نام تجاری | BRESSER |
| شماره مدل | 7002525 |
| ASIN | B08VDM1VB7 |
| موارد استفاده توصیه شده | صفحه اصلی |
| کاربردهای خاص | Air humidity measurement, air pressure measurement, temperature alarm, temperature measurement, wind measurement, alarm clock |
| منبع تغذیه | Battery Powered (3 AA batteries required for outdoor sensor, 1 CR2032 for main unit backup) |
| ویژگی خاص | Lightweight, Transparent |
| مواد | فلز |
| فناوری اتصال | 433 مگاهرتز یا 868 مگاهرتز |
| ابعاد محصول | 4.65"D x 7.17"W x 0.79"H (Main Unit) |
| اجزای شامل | 1 product (Main Display Unit, 5-in-1 Outdoor Multi-Sensor Unit, mounting accessories, power adapter) |
| دقت دما | 1 or 2 Degrees Celsius |
| فناوری سنسور | Ultrasonic or other compatible |
| درجه حرارت بالا | 50 درجه سانتیگراد |
| وزن مورد | 0.71 کیلوگرم (1.56 پوند) |
| نوع نمایشگر | LCD, LED or VFD |
| نوع پایان | براق |
| شکل | مستطیل شکل |
| تاریخ برای اولین بار در دسترس است | 16 مارس 2023 |
7. گارانتی و پشتیبانی
For warranty information, please refer to the documentation included with your product packaging or visit the official BRESSER website. For technical support or assistance, please contact BRESSER customer service directly through their official channels.





