مقدمه
This manual provides detailed instructions for the setup, operation, and maintenance of your DOQAUS Wireless Indoor/Outdoor Thermometer and Hygrometer. This device is designed to monitor indoor and outdoor temperature and humidity levels, helping you maintain a comfortable and healthy environment.
محتویات بسته
- 1 x DOQAUS Wireless Weather Station (Main Unit)
- 1 x Outdoor Wireless Sensor
- ۱ عدد دفترچه راهنمای کاربر
- 2 x AAA 1.5V Batteries (for Main Unit)
- 2 x AA 1.5V Batteries (for Outdoor Sensor)
Image: The main display unit, a remote outdoor sensor, and the required AAA and AA batteries.
ویژگی های محصول
- دقت بالا: Provides temperature readings within ±1.5°F / ±1°C and humidity within ±5%RH.
- پاسخ سریع: Measurements updated every 5 seconds.
- افزایش عمر باتری: Up to 12 months for the sensor and 10 months for the display unit.
- یادآوری باتری کم: Alerts when battery levels are low.
- برد بلند: Up to 300ft/90m wireless transmission range.
- Multi-Location Monitoring: Supports up to 3 outdoor remote sensors (one included).
- صفحه نمایش LCD شفاف: 4-inch screen with large, bold numbers for easy readability.
- سوابق داده: Displays 24-hour and all-time maximum/minimum temperature and humidity records.
- شاخص های روند: Shows temperature and humidity trend changes.
- نشانگر سطح راحتی: Displays DRY/COM/WET status.
- قابل تغییر درجه سانتیگراد/درجه فارنهایت: به راحتی بین سانتیگراد و فارنهایت جابجا شوید.
- قرار دادن همه کاره: Desktop stand and wall-mount option for the main unit.
Image: Diagram highlighting the various display features of the main unit, including indicators for low battery, remote signal, channel selection, and temperature/humidity trends.
Image: Visual representation of the thermometer's high accuracy and wide measurement range for both indoor and outdoor environments.
دستورالعمل های راه اندازی
1. باتری ها را نصب کنید
- واحد اصلی: Open the battery compartment on the back of the main unit. Insert 2 x AAA 1.5V batteries, ensuring correct polarity (+/-). Close the compartment.
- سنسور فضای باز: Open the battery compartment on the back of the outdoor sensor. Insert 2 x AA 1.5V batteries, ensuring correct polarity (+/-). Close the compartment.
تصویر: نمای عقب view of the main display unit and the outdoor sensor, illustrating the battery installation process.
۳. جفت کردن سنسور با واحد اصلی
Once batteries are installed in both units, the main unit will automatically search for the outdoor sensor. The outdoor temperature and humidity readings should appear on the main unit's display. If the readings do not appear, press the "CH" button on the main unit to cycle through channels or press the "RESET" button on both units to re-establish connection.
۶. دستورالعملهای قرارگیری
- واحد اصلی: Place the main unit indoors on a flat surface using its desktop stand, or mount it on a wall using the integrated hanging hole.
- سنسور فضای باز:
- Mount the sensor in a shaded area, away from direct sunlight and precipitation, to ensure accurate readings.
- Ensure the distance between the main unit and the remote sensor is at least 5-6.5 feet (1.5-2 meters).
- Avoid placing the main unit near metal window frames or other electronic equipment (e.g., computer monitors, TVs, headphones, speakers) to prevent signal interference.
- The maximum wireless range is 300ft/90m, but this can be affected by obstacles like walls and other electronic devices.
Image: The main display unit shown in two common placements: standing on a desk and mounted on a wall.
Image: Illustration demonstrating optimal placement for the main unit indoors and the remote sensor outdoors, emphasizing shaded areas for the sensor.
دستورالعمل های عملیاتی
1. نمایش بیش ازview
The main unit's LCD displays indoor and outdoor temperature and humidity, comfort level indicators, trend arrows, and MAX/MIN records.
Image: The main display unit, showing its 4-inch LCD screen and compact dimensions for easy reading.
2. توابع دکمه
- دکمه °C/°F: Press to switch between Celsius and Fahrenheit temperature units.
- دکمه CH: Press to cycle through the connected outdoor sensors (CH1, CH2, CH3). If only one sensor is connected, it will display CH1.
- دکمه MAX/MIN:
- یکبار به را فشار دهید view the maximum temperature and humidity recorded since the last reset.
- دوباره به را فشار دهید view the minimum temperature and humidity recorded.
- Press and hold to reset the MAX/MIN records.
۱. درک نمایشگر
- Temperature/Humidity Trends: Arrows indicate whether temperature or humidity is rising, falling, or remaining stable.
- نشانگر سطح راحتی:
- خشک: Humidity is low.
- COM: Humidity is comfortable.
- خیس: Humidity is high.
- نشانگر کم بودن باتری: An icon will appear on the display when the batteries in either the main unit or the sensor are low and require replacement.
تعمیر و نگهداری
- تعویض باتری: Replace batteries when the low battery indicator appears on the display. Ensure to use the correct battery types (AAA for main unit, AA for sensor) and observe polarity.
- تمیز کردن: واحدها را با یک پارچه نرم و لطیف پاک کنید.amp پارچه. از پاککنندههای ساینده استفاده نکنید و دستگاهها را در آب فرو نبرید.
- ذخیره سازی: اگر دستگاه را برای مدت طولانی انبار میکنید، باتریها را خارج کنید تا از نشتی جلوگیری شود.
عیب یابی
| مشکل | راه حل |
|---|---|
| No outdoor reading or "---" displayed. |
|
| قرائت نادرست دما/رطوبت. |
|
| نشانگر باتری کم ظاهر میشود. | Replace the batteries in the indicated unit (main unit or sensor) with new ones of the correct type (AAA for main, AA for sensor). |
مشخصات
- برند: DOQAUS
- مدل: HM2
- محدوده دمای داخلی: -4 درجه فارنهایت تا 158 درجه فارنهایت (20- تا 70 درجه سانتی گراد)
- محدوده دمای فضای باز: -58 درجه فارنهایت تا 158 درجه فارنهایت (50- تا 70 درجه سانتی گراد)
- دقت دما: ± 1.5 درجه فارنهایت / 1 ± درجه سانتی گراد
- محدوده رطوبت: 1% تا 99% RH
- دقت رطوبت: ± 5٪ RH
- برد بی سیم: Up to 300ft / 90m (open air)
- نرخ بروز رسانی: هر 5 ثانیه
- برق واحد اصلی: ۳ عدد باتری AAA 1.5V (شامل میشود)
- توان حسگر فضای باز: ۲ عدد باتری قلمی ۱.۵ ولتی (شامل میشود)
- نوع نصب: رومیزی، پایه دیواری
- ابعاد (واحد اصلی): تقریباً 14.9 × 13.7 × 3.1 سانتی متر
- وزن: 250 g (approximate, including batteries)
گارانتی و پشتیبانی
Specific warranty information and direct customer support contact details are not provided in the product description. Please refer to the product packaging or the manufacturer's official webسایتی برای جدیدترین شرایط گارانتی و گزینههای پشتیبانی.
