HPE Smart Array P440/2GB FBWC 12GB 1-Port INT SAS Controller User Manual

1. مقدمه

This manual provides comprehensive instructions for the installation, operation, maintenance, and troubleshooting of the HPE Smart Array P440/2GB FBWC 12GB 1-Port INT SAS Controller. The HPE Smart Array P440 is a high-performance PCIe3 x8 SAS RAID controller designed for servers, offering 12Gb/s SAS connectivity and 2GB of Flash-Backed Write Cache (FBWC) for enhanced data protection and performance. It supports various RAID levels, providing robust storage solutions for demanding applications.

2. اطلاعات ایمنی

Always observe the following safety precautions when handling or installing the controller:

• Ensure the server is powered off and disconnected from all power sources before installation or removal.
• Wear an anti-static wrist strap and work on an anti-static mat to prevent electrostatic discharge (ESD) damage to the controller and other components.
• Handle the controller by its edges; avoid touching the components or connectors directly.
• Refer to your server's documentation for specific safety guidelines and installation procedures.
• Do not attempt to modify or repair the controller. Contact qualified service personnel for assistance.

3. محتویات بسته

بررسی کنید که بسته شما حاوی موارد زیر باشد:

• HPE Smart Array P440/2GB FBWC 12GB 1-Port INT SAS Controller
• کم طرفدارfile bracket (if applicable, may be pre-installed or included separately)
• Documentation (e.g., Quick Install Guide, Warranty Information)

Note: SAS cables and battery backup unit (BBU) for FBWC are typically sold separately.

4. راه اندازی و نصب

4.1 نصب فیزیکی

1. Prepare the Server: Power down the server and disconnect all power cords. Open the server chassis according to the manufacturer's instructions.
2. یک اسلات PCIe موجود را پیدا کنید: Identify an available PCIe 3.0 x8 or larger slot on the server's motherboard.
3. کنترلر را نصب کنید: Carefully align the controller with the PCIe slot and press down firmly until it is securely seated. Secure the controller with the retention bracket or screw.
4. Connect SAS Cables: Connect the internal SAS cables from the controller's port to your SAS/SATA backplane or directly to your drives. Ensure secure connections.
5. بستن و روشن کردن: Close the server chassis, reconnect power cords, and power on the server.

شکل 1: عقب view of the HPE Smart Array P440 Controller, highlighting the PCIe connector and various surface-mounted components. The model number 'CPLD 0101 8195' is visible on a chip. This image shows the side that interfaces with the motherboard.

شکل 2: جلو view of the HPE Smart Array P440 Controller, featuring a large heatsink for thermal management and the internal SAS port. A label with 'SP#830057-001 PFETL0ARH961KP' and 'SN: ZS79CP9638' is visible on the heatsink and a sticker, respectively. This image displays the side with the main processing unit and SAS connectors.

4.2 نصب درایور

Upon server boot, the operating system may automatically detect and install generic drivers. For optimal performance and full functionality, it is recommended to download and install the latest drivers and firmware from the official HPE support website for your specific server model and operating system.

4.3 پیکربندی RAID

The HPE Smart Array P440 controller supports various RAID levels (e.g., RAID 0, 1, 5, 6, 10, 50, 60). RAID configuration is typically performed using one of the following methods:

• HPE Smart Storage Administrator (SSA): A graphical utility for managing Smart Array controllers.
• Option ROM Configuration for Arrays (ORCA): Accessed during server boot-up by pressing a specific key combination (usually F8 or F9) when prompted.
• HPE Integrated Lights-Out (iLO): For remote management and configuration.

Refer to the HPE Smart Array P440 documentation on the HPE support website for detailed instructions on configuring RAID arrays.

۳. کار با کنترلر

Once installed and configured, the HPE Smart Array P440 operates transparently within your server environment. Data is managed by the controller according to the configured RAID levels. You can monitor the controller and array status using HPE Smart Storage Administrator (SSA) or other system management tools provided by HPE.

• نظارت: Regularly check the health of your RAID arrays and individual drives through the SSA utility.
• عملکرد: Ensure that the controller's firmware and drivers are up-to-date for optimal performance.
• FBWC: The Flash-Backed Write Cache protects data in transit to the drives during power outages, ensuring data integrity.

6. تعمیر و نگهداری

Regular maintenance helps ensure the longevity and reliability of your HPE Smart Array P440 controller:

• به روز رسانی سیستم عامل: Periodically check the HPE support website for new firmware versions. Firmware updates can improve performance, add features, and resolve known issues. Follow HPE's recommended procedures for firmware updates.
• به روز رسانی درایور: Keep your operating system drivers for the controller updated to ensure compatibility and optimal performance.
• بازرسی بدنی: During server maintenance, visually inspect the controller for any signs of damage, loose connections, or excessive dust accumulation. Ensure proper airflow around the card.
• Battery Backup Unit (BBU): If a BBU is used with the FBWC, monitor its health and replace it as recommended by HPE to ensure write cache protection.

7 عیب یابی

این بخش راه‌حل‌هایی برای مشکلات رایجی که ممکن است با آنها مواجه شوید ارائه می‌دهد:

7.1 Controller Not Detected

• بررسی صندلی‌ها: Ensure the controller is fully seated in the PCIe slot.
• قدرت: Verify the server has adequate power and that all power connections are secure.
• اسلات PCIe: Try installing the controller in a different PCIe slot to rule out a faulty slot.
• تنظیمات بایوس/UEFI: Check server BIOS/UEFI settings to ensure PCIe slots are enabled and configured correctly.

۷.۱ درایوها شناسایی نمی‌شوند

• SAS Cable Connections: Verify that all SAS cables are securely connected between the controller and the drives/backplane.
• Drive Power: Ensure that the drives are receiving power.
• سازگاری درایو: Confirm that the drives are compatible with the HPE Smart Array P440 controller.
• پیکربندی RAID: Check the RAID configuration utility (SSA or ORCA) to see if drives are visible but not configured into an array.

۶.۲ مشکلات عملکرد

• میان‌افزار/درایورها: Update controller firmware and drivers to the latest versions.
• سطح RAID: Ensure the chosen RAID level is appropriate for your workload. Some RAID levels offer better performance than others.
• سلامت درایو: Check the health of individual drives in the array. Degraded drives can impact performance.
• Cache Settings: Verify FBWC is functioning correctly and configured optimally.

For more advanced troubleshooting, consult the HPE Smart Array P440 documentation or contact HPE technical support.

8. مشخصات

9. گارانتی و پشتیبانی

The HPE Smart Array P440/2GB FBWC 12GB 1-Port INT SAS Controller is covered by a manufacturer's warranty. For specific warranty terms and conditions, please refer to the documentation included with your product or visit the official HPE support webسایت

For technical assistance, driver downloads, firmware updates, and additional documentation, please visit the HPE support webسایت:

https://www.hpe.com/support

When contacting support, have your product model number (830057-001) and serial number ready.