Motorline PROFESSIONAL MX4SP

Motorline Falk Garage Door Remote Control User Manual

Model: MX4SP, MX5SP, MXS4SP Compatible

1. مقدمه

Thank you for choosing the Motorline Falk 4-channel garage door remote control. This remote is designed for convenient and reliable operation of your garage door or gate system. It operates at a frequency of 433.92 MHz and is compatible with Motorline MX4SP, MX5SP, and MXS4SP systems.

Please read this manual carefully before installation and use to ensure proper function and longevity of your device.

2. محصول تمام شدview

The Motorline Falk remote control features a robust design with four independent buttons, allowing you to control up to four different devices or functions. Its ergonomic shape ensures comfortable handling.

Motorline Falk 4-channel garage door remote control

شکل 1: Motorline Falk 4-channel garage door remote control. This image shows the sleek, black remote control with its four distinct buttons and a small lanyard loop at the bottom, held in a hand.

۵. راه‌اندازی و برنامه‌نویسی

Programming the Motorline Falk remote control typically involves synchronizing it with your garage door receiver or control panel. The exact steps may vary depending on your specific Motorline system (MX4SP, MX5SP, MXS4SP).

General Programming Steps:

  1. دسترسی به گیرنده: Locate the programming button on your garage door opener's receiver or control panel. This button is often labeled 'PROG', 'LEARN', or 'CODE'. Refer to your garage door opener's manual for its exact location.
  2. فعال کردن حالت یادگیری: دکمه برنامه‌ریزی روی گیرنده را فشار داده و رها کنید. معمولاً یک چراغ نشانگر (LED) روی گیرنده روشن یا چشمک می‌زند که نشان می‌دهد در حالت یادگیری است.
  3. ریموت را برنامه‌ریزی کنید: Within a few seconds of activating learning mode, press and hold the desired button on your new Motorline Falk remote control. Keep the button pressed until the receiver's indicator light changes (e.g., turns off, flashes rapidly, or changes color), confirming successful programming.
  4. ریموت را تست کنید: Release the button on the remote. Wait a few seconds, then press the programmed button again to test if the garage door or gate responds.
  5. Program Additional Buttons (Optional): Repeat steps 2-4 for any other buttons on the remote you wish to program for different functions or doors.

نکته مهم: If you encounter difficulties, consult the manual for your specific Motorline garage door opener model or visit the official Motorline YouTube channel for video tutorials. The channel 'Manettes et Automatismes' often provides programming guides: Motorline YouTube Channel.

Motorline Falk remote control with its packaging

شکل 2: Motorline Falk remote control with its packaging. This image displays the remote alongside its small, white and blue retail box, indicating it is a product from Portugal.

4. دستورالعمل های عملیاتی

Once programmed, operating your Motorline Falk remote control is straightforward:

  • باز/بسته کردن درب: Press the button you have programmed to your garage door or gate. The door/gate will activate.
  • عملکرد توقف: If your system supports it, pressing the button again while the door is in motion may stop it.
  • چندین دستگاه: Use different programmed buttons to control separate garage doors, gates, or other compatible Motorline devices.

5. تعمیر و نگهداری

تعویض باتری:

The Motorline Falk remote control uses an Alkaline A-type battery (1 included). When the remote's range decreases significantly or the indicator light (if present) fails to illuminate, it's time to replace the battery.

  1. C را باز کنیدasing: کنترل از راه دور را با دقت باز کنید.asing. This usually involves a small screw or a prying point on the side.
  2. باتری قدیمی را بردارید: باتری قدیمی را با توجه به قطب (+/-) آن، خارج کنید.
  3. باتری جدید را وارد کنید: Insert a new Alkaline A-type battery, ensuring correct polarity.
  4. بستن Casing: Securely close the remote control casing.

دفع: باتری‌های قدیمی را طبق مقررات محلی دور بیندازید.

6 عیب یابی

  • ریموت پاسخ نمی دهد:
    • باتری را بررسی کنید. در صورت لزوم آن را تعویض کنید.
    • مطمئن شوید که ریموت در محدوده گیرنده قرار دارد.
    • Verify that the remote is correctly programmed to your receiver. Re-program if unsure.
  • Reduced Operating Range:
    • ممکن است باتری ضعیف باشد. آن را تعویض کنید.
    • Check for sources of radio interference near the receiver or remote.
    • Ensure the receiver antenna is not obstructed or damaged.
  • Door Opens/Closes Intermittently:
    • This could indicate a weak battery.
    • تداخل عوامل محیطی را بررسی کنید.

7. مشخصات

ویژگیجزئیات
نام تجاریMotorline PROFESSIONAL
نام مدلMX4SP
رنگمشکی
فناوری اتصالRadiofrequency (433.92 MHz)
ویژگی خاصارگونومیک
دستگاه های سازگارMotorline MX4SP Garage Device, MX5SP, MXS4SP
ترکیب باتریقلیایی
باتری گنجانده شده است1 A-type battery
تعداد دکمه ها4
نوع کنترلرکنترل دکمه
حداکثر برد10 متر

8. گارانتی و پشتیبانی

For warranty information, technical support, or further assistance, please contact Motorline PROFESSIONAL directly or visit their official website. You can find more product details and support resources on the Motorline webسایت: Motorline Falk Product Page.

لطفاً رسید خرید خود را برای هرگونه ادعای گارانتی نگه دارید.

اسناد مرتبط - MX4SP

قبلview دفترچه راهنمای کاربری و برنامه‌نویسی فرستنده بی‌سیم Motorline MX14
راهنمای جامع برای کار و برنامه‌ریزی فرستنده بی‌سیم Motorline MX14 برای سیستم‌های اتوماسیون دروازه، شامل مشخصات فنی، نصب و طرح‌های اتصال.
قبلview Motorline Professional MX Series Remote Controls User and Installer Manual
User and installer manual for Motorline Professional MX95N (1-channel), MX96N (5-channel), and MX97N (15-channel) rolling code remote controls. Details features, button functions, power, and specifications for gate and garage door automation.
قبلview Instrukcja Obsługi Centrali Sterującej Motorline MC2
Szczegółowa instrukcja obsługi centrali sterującej Motorline MC2 do automatyki bram, zawierająca informacje o installacji, programowaniu, testowaniu, rozwiązywaniu problemów oraz schematy połączeń.
قبلview دفترچه راهنمای کاربر / نصب Motorline MC2 - برد کنترل اتوماسیون دروازه
دفترچه راهنمای جامع کاربر و نصب برای برد کنترل Motorline MC2، که جزئیات مشخصات فنی، پیکربندی، عیب‌یابی و طرح‌های اتصال سیستم‌های اتوماسیون دروازه را شرح می‌دهد.
قبلview Motorline LINCE 230V/110V/24V Automatic Gate Opener User and Installer Manual
This manual provides comprehensive instructions for the installation, operation, and maintenance of the Motorline LINCE series automatic gate openers (models LINCE300, LINCE400, LINCE600) for 230V, 110V, and 24V systems. It includes safety guidelines, technical specifications, troubleshooting, and control board wiring diagrams.
قبلview Motorline MTT03 User and Installer's Manual - Access Control Turnstile
Comprehensive user and installer's manual for the Motorline MTT03 tripoid turnstile. Covers installation, safety, programming, maintenance, and troubleshooting for access control systems.