1. مقدمه
This manual provides comprehensive instructions for the installation, operation, and maintenance of your Schlage 163604 Addison Lower Half Front Entry Handleset with Accent Lever. This handleset is designed to enhance both the security and aesthetic appeal of your front door. All Schlage front entry handlesets are precision-engineered for security and ease of installation.
Image 1.1: Schlage 163604 Addison Handleset. This image displays the main components of the handleset, including the exterior handleset, interior lever, latch, and mounting hardware.
2. اطلاعات ایمنی
لطفاً قبل از نصب و استفاده، تمام دستورالعملها را با دقت مطالعه کنید. عدم رعایت این دستورالعملها ممکن است منجر به آسیب به محصول، اموال یا آسیبهای شخصی شود.
- هنگام نصب، همیشه از تجهیزات ایمنی مناسب مانند عینک ایمنی استفاده کنید.
- Use only the tools specified in the installation guide.
- قطعات کوچک را از کودکان دور نگه دارید.
- Do not modify the product in any way, as this may compromise its security features and void the warranty.
3. محتویات بسته
قبل از شروع نصب، از وجود همه اجزا اطمینان حاصل کنید:
- مجموعه دسته بیرونی
- Interior Accent Lever Assembly
- مکانیسم چفت
- صفحه اعتصاب
- پیچها و بستهای نصب
- الگوی نصب (در صورت وجود)
- کلیدها (در صورت وجود)
4. راه اندازی و نصب
The Schlage 163604 handleset is designed for easy installation and can be fitted to both right-hand and left-hand door swings. Its patented adjustable bottom thru-bolt allows for vertical adjustment of 1-1/2 inches to accommodate various pre-existing door preparations.
4.1 آماده سازی درب
- Ensure your door has the correct bore holes and backset. Refer to the included template for precise measurements.
- If replacing an existing handleset, remove the old hardware.
4.2 Installing the Latch
- Insert the latch into the edge bore hole of the door.
- Secure the latch with the provided screws. Ensure the latch bolt faces the correct direction for your door swing.
4.3 Installing the Exterior Handleset
- Position the exterior handleset assembly on the outside of the door, aligning the spindle with the latch mechanism.
- Feed the thru-bolt through the lower hole in the door. Adjust its position as needed using the patented adjustable feature.
4.4 Installing the Interior Lever
- Place the interior lever assembly on the inside of the door, aligning it with the exterior handleset and latch.
- Secure the interior and exterior components together using the provided screws. Tighten all screws firmly but do not overtighten.
4.5 نصب Strike Plate
- Align the strike plate with the latch bolt on the door frame.
- Mark and chisel out the necessary area for a flush fit, if required.
- Secure the strike plate with the provided screws.
5. دستورالعمل های عملیاتی
To operate your Schlage Addison Handleset:
- برای قفل کردن: From the interior, rotate the thumbturn to the locked position. From the exterior, insert the key and turn to lock.
- برای باز کردن قفل: From the interior, rotate the thumbturn to the unlocked position. From the exterior, insert the key and turn to unlock.
- برای باز کردن: Depress the thumbpiece on the exterior handleset or the lever on the interior to retract the latch bolt.
6. تعمیر و نگهداری
Proper maintenance ensures the longevity and smooth operation of your handleset.
- تمیز کردن: دسته فرمان را مرتباً با یک پارچه نرم و لطیف تمیز کنید.amp پارچه. از پاککنندههای ساینده، حلالها یا مواد شیمیایی قوی خودداری کنید، زیرا این مواد میتوانند به روکش آسیب بزنند.
- روغن کاری: Periodically apply a small amount of graphite-based lubricant to the keyway and latch mechanism to ensure smooth operation. Do not use oil-based lubricants, as they can attract dirt.
- سفت کردن: Check all mounting screws periodically and tighten if necessary. Do not overtighten.
7 عیب یابی
| مشکل | علت احتمالی | راه حل |
|---|---|---|
| Lever/Thumbpiece is stiff or sticky | Lack of lubrication, dirt buildup, misaligned components | Apply graphite lubricant to the latch mechanism. Clean the exterior. Check for proper alignment during installation. |
| Key does not turn smoothly | Dirt in keyway, worn key, lock mechanism needs lubrication | Apply graphite lubricant to the keyway. Try a spare key. |
| درب به درستی چفت نمیشود | Strike plate misalignment, latch bolt obstruction | Adjust the strike plate position. Ensure no debris is blocking the latch bolt. |
| Handleset feels loose | Mounting screws are loose | تمام پیچهای نصب قابل مشاهده را محکم کنید. |
8. مشخصات
- شماره مدل: 163604
- برند: برنامه
- مواد: فلز
- رنگ: ساتن نیکل
- پایان: ساتن
- سبک: مدرن
- ابعاد محصول: 16.51 x 20.32 x 52.07 سانتیمتر (6.5 x 8 x 20.5 اینچ)
- وزن مورد: 2.04 کیلوگرم (4.5 پوند)
- نوع دسته: اهرم
- ویژگی خاص: Easy to Install, Patented adjustable bottom thru-bolt
- سازنده: Allegion Canada Inc
- کشور مبدا: مکزیک
9. گارانتی و پشتیبانی
Schlage products are manufactured to the highest standards and are backed by a limited lifetime mechanical and finish warranty, and a 3-year electronics warranty (where applicable). For specific warranty details, product support, or to contact customer service, please visit the official Schlage webبه سایت مراجعه کنید یا به کارت گارانتی همراه محصول خود مراجعه کنید.
برای کمک بیشتر، لطفاً به فروشگاه SCHLAGE.
