Baseus 10W Automatic Clamping Wireless Car Charger Mount User Manual

مقدمه

Thank you for choosing the Baseus 10W Automatic Clamping Wireless Car Charger Mount. This device is designed to provide convenient and fast wireless charging for your Qi-enabled smartphone while securely holding it in your vehicle. Please read this manual carefully before use to ensure proper operation and to maximize the product's lifespan.

اطلاعات ایمنی

• محصول را جدا نکنید یا تغییر ندهید.
• Keep away from water, fire, and high temperatures.
• از وارد شدن ضربه‌های شدید یا افتادن دستگاه خودداری کنید.
• هنگام استفاده از تهویه مناسب اطراف شارژر اطمینان حاصل کنید.
• Use only with compatible power sources (QC 3.0 car charger recommended for fast charging).

محتویات بسته

• Baseus Wireless Car Charger Mount
• Air Vent Clip (1x)
• Micro USB Cable (4.9ft)
• راهنمای کاربر

محصول تمام شده استview

The Baseus Wireless Car Charger Mount features an automatic clamping mechanism, Qi wireless charging, and an air vent mounting system. It is designed for easy one-hand operation.

اجزای کلیدی:

• پد شارژ: The surface where the phone rests for wireless charging.
• اتوماتیک Clamping Arms: Securely hold the phone in place.
• Infrared Induction Sensor: Detects the phone for automatic clamping.
• One-Tap Release Button: Located on the side, releases the clampبازوها
• گیره دریچه هوا: Attaches the mount to your car's air vent.
• پورت میکرو USB: برای ورودی برق

دستورالعمل های راه اندازی

1. Attaching the Air Vent Clip

1. Unscrew the nut on the back of the charger mount.
2. Insert the ball joint of the air vent clip into the nut, then into the socket on the back of the charger.
3. Tighten the nut to secure the clip to the charger.

2. Mounting to the Car Air Vent

1. Choose a suitable air vent in your vehicle. The clip is designed for various vent types, as shown in the image below.
2. Gently push the air vent clip onto one of the vent blades until it is securely attached.
3. Adjust the angle of the charger mount for optimal viewing.

This image illustrates the different types of car air vents that are compatible with the charger mount's clip. Ensure your car's vent matches one of the compatible designs for secure installation.

3. اتصال برق

1. Connect the Micro USB cable to the charging port on the bottom of the charger mount.
2. Plug the other end of the USB cable into a car charger (not included). For 10W fast charging, a QC 3.0 car charger is required. Standard 5V/2A car chargers will provide 5W charging.
3. The indicator light on the charger will illuminate, indicating it is powered on and ready for use.

دستورالعمل های عملیاتی

1. Placing Your Phone

1. Hold your Qi-enabled smartphone near the charging pad. The infrared induction sensor will detect your phone.
2. کلر اتوماتیکamping arms will open. Place your phone onto the charging pad.
3. clamping arms will automatically close, securing your phone and initiating wireless charging.

This image illustrates how the infrared sensor detects a phone, causing the arms to automatically open and then clamp shut once the phone is placed, initiating charging.

2. Removing Your Phone

1. To release your phone, gently touch the sensor button located on the right side of the charger mount.
2. clamping arms will automatically open, allowing you to remove your phone.

3. Wireless Charging Functionality

The charger supports Qi-enabled phones between 4.0 and 6.5 inches. Charging speeds vary:

• شارژ سریع 10 واتی: For compatible Samsung phones (e.g., Galaxy S10/S9/Note 9). Requires a QC 3.0 car charger.
• شارژ سریع 7.5 واتی: For compatible iPhones (e.g., iPhone Xs/XR/X/8). Requires a QC 3.0 car charger.
• 5W Standard Charging: For other Qi-enabled devices. Requires a 5V/2A car charger.

نکته مهم:

• The thickness of your phone case should not exceed 4mm for optimal charging.
• Metal cases or foreign objects between the phone and charger will interfere with wireless charging.

This image provides a visual guide to the wireless charging capabilities, showing 10W, 7.5W, and 5W charging for various phone models and the requirement for a QC 3.0 car charger for fast charging.

۱۱. ویدیوی معرفی محصول

Watch this video for a visual demonstration of the Baseus Wireless Car Charger Mount's features and operation.

تعمیر و نگهداری

• Clean the surface of the charger with a soft, dry cloth. Do not use abrasive cleaners or solvents.
• Ensure the air vent clip is free from dust and debris to maintain a secure grip.
• Regularly check the Micro USB cable for any signs of wear or damage.

عیب یابی

مشخصات

• برند: بیسئوس
• نوع رابط: USB، بی سیم
• دستگاه های سازگار: Qi-enabled Smartphones (4.0"-6.5")
• مدل های تلفن سازگار: iPhone Xs, Xs Max, XR, X, 8, 8 Plus; Samsung Galaxy S10, S10 Plus, S10e, S9, S9 Plus, S8, S8 Plus, S7, S7 edge, S6 edge plus, Note 9, Note 5 series devices.
• ویژگی خاص: شارژ سریع
• رنگ: مشکی
• حجم ورودیtage: 9 ولت
• Ampخشم: 1.67 Amps
• مجموع پورت های USB: 1
• وزن مورد: 10.2 اونس
• ابعاد بسته بندی: 8.15 x 4.45 x 2.91 اینچ

گارانتی و پشتیبانی

This Baseus Wireless Car Charger Mount comes with an گارانتی 18 ماهه from the date of purchase. Baseus also provides خدمات مشتری مادام العمر برای این محصول

For warranty claims, technical support, or any inquiries, please refer to the contact information provided with your purchase or visit the official Baseus webسایت