Perlegear TV Wall Mount PGXSF1 Instruction Manual

1. مقدمه

This instruction manual provides detailed guidance for the safe and proper installation, operation, and maintenance of your Perlegear TV Wall Mount, model PGXSF1. Please read this manual thoroughly before installation and retain it for future reference. Incorrect installation may result in product damage or personal injury.

2. محصول تمام شدview

The Perlegear PGXSF1 is a full-motion TV wall mount designed for flat-screen LED, LCD, and OLED televisions. It offers flexibility in viewing angles and space-saving features.

ویژگی های کلیدی:

• سازگاری با اندازه صفحه نمایش: Fits most 10 to 32-inch televisions.
• ظرفیت وزنی: Supports TVs up to 20 kg (44 lbs).
• سازگاری با VESA: 50x50mm, 75x75mm, 100x100mm.
• حرکت:
  • Tilt: +5° to -15°
  • چرخش: +/- 90 درجه
  • چرخش: 360 درجه
• پسوند: Retracts to 7.9 cm (3.1 inches) from the wall and extends up to 44 cm (17.3 inches).
• مواد: High-grade alloy steel construction.

شکل 2.1: اصلی view of the Perlegear PGXSF1 TV Wall Mount.

شکل 2.2: VESA mounting pattern compatibility (50x50mm, 75x75mm, 100x100mm).

شکل 2.3: The mount is tested to support up to 20 kg (44 lbs).

3. اطلاعات ایمنی

هشدار: Failure to read and follow these instructions may result in serious personal injury, property damage, or voiding of your warranty.

• Do not begin installation until you have read and understood all instructions and warnings contained in this manual.
• مطمئن شوید که سطح نصب می‌تواند وزن ترکیبی پایه و تلویزیون را به طور ایمن تحمل کند.
• This product is designed for installation on wood studs, solid concrete, or brick walls. DO NOT mount on drywall alone.
• Use only the hardware provided or specified by Perlegear.
• If you have any doubts about the installation process, consult a qualified professional.
• در حین نصب، کودکان و حیوانات خانگی را دور نگه دارید.
• Periodically check that the mount is secure and all fasteners are tight.

4. محتویات بسته

Verify that all components are present and undamaged before installation. If any parts are missing or defective, contact Perlegear customer service.

• 1x TV Wall Mount Assembly (Wall Plate and Arm)
• 2x Wall / Lag Screws
• 2x Wall Screw Washers
• 2x Concrete Anchors (Rawl Plugs)
• 4x M4 Screws (16mm length)
• 4x M4 Screws (30mm length)
• 4x M6 Screws (16mm length)
• 4x M6 Screws (30mm length)
• 4x Spacers (10mm thickness)
• 8x Spacers (5mm thickness)
• 4x Silver Double Washers
• راهنمای دستورالعمل

5. راه اندازی و نصب

برای نصب ایمن، این مراحل را با دقت دنبال کنید.

۴.۱ بررسی‌های قبل از نصب:

1. سازگاری تلویزیون را بررسی کنید: Ensure your TV's screen size is between 10 and 32 inches, its weight does not exceed 20 kg, and its VESA mounting pattern is 50x50mm, 75x75mm, or 100x100mm.
2. شناسایی نوع دیوار: Determine if your wall is wood stud, solid concrete, or brick. Do not install on drywall alone.
3. جمع آوری ابزار: You will need a drill, stud finder (for wood studs), level, pencil, and screwdriver.

5.2 Wall Plate Installation:

1. محل حفاری را علامت گذاری کنید: Hold the wall plate against the wall at your desired height. Use a level to ensure it is straight. Mark the two drilling points through the holes on the wall plate.
2. سوراخ های پایلوت را دریل کنید:
   • برای گل‌میخ‌های چوبی: Drill two pilot holes (e.g., 5.5mm / 7/32 inch diameter) at the marked locations to a depth of 60mm (2.36 inches).
   • برای دیوارهای بتنی/آجری: Drill two pilot holes (e.g., 10mm / 3/8 inch diameter) at the marked locations to a depth of 60mm (2.36 inches). Insert the concrete anchors (rawl plugs) into these holes, ensuring they are flush with the wall surface.
3. صفحه دیواری را وصل کنید: Align the wall plate with the pilot holes. Insert the wall/lag screws through the wall plate and into the pilot holes (and anchors if applicable). Use the wall screw washers. Tighten the screws firmly until the wall plate is securely fastened to the wall. Do not overtighten.

5.3 Attaching TV to Mount:

1. Select TV Screws and Spacers: Choose the appropriate M4 or M6 screws that fit your TV's VESA holes. The screws should be long enough to securely engage the TV's threads but not so long as to damage internal components. Use the provided spacers if your TV has an uneven back or recessed mounting holes.
2. Attach Mount to TV: Carefully align the VESA plate of the mount with the mounting holes on the back of your TV. Insert the selected screws through the VESA plate (and spacers if used) and into the TV's mounting holes. Tighten securely with a screwdriver.

6. دستورالعمل های عملیاتی

Once installed, your Perlegear PGXSF1 mount allows for various adjustments to optimize your viewتجربه کردن

Adjusting the TV Position:

• گسترش و انقباض: Gently pull the TV away from the wall to extend the arm, or push it towards the wall to retract it. The arm extends up to 44 cm and retracts to 7.9 cm.
• چرخش: Carefully pivot the TV left or right up to +/- 90 degrees to achieve the desired horizontal viewing angle. The maximum swivel angle may vary depending on TV size and distance from the wall.

شکل 6.1: Swivel the TV left or right for optimal viewing.
• شیب: عمودی را تنظیم کنید viewing angle by tilting the TV +5 degrees upwards or -15 degrees downwards. Loosen the tilt adjustment knobs (if present) slightly, adjust the angle, and then re-tighten to secure.


شکل 6.2: Tilt the TV up or down to reduce glare or adjust viewارتفاع

• چرخش: The TV can be rotated 360 degrees, allowing for landscape or portrait orientation. This feature is useful for specific applications or to correct minor leveling issues after installation.


شکل 6.3: Rotate the TV 360 degrees for flexible orientation.

7. تعمیر و نگهداری

نگهداری منظم، طول عمر و عملکرد ایمن پایه دیواری تلویزیون شما را تضمین می‌کند.

• تمیز کردن: پایه را با یک پارچه نرم و خشک پاک کنید. از پاک کننده ها یا حلال های ساینده استفاده نکنید.
• بررسی های دوره ای: Every few months, check all screws and bolts to ensure they are securely tightened. Re-tighten if necessary.
• روغن کاری: If the swivel or tilt mechanisms become stiff, a small amount of silicone-based lubricant (e.g., WD-40) can be applied to the moving joints. Wipe off any excess.

8 عیب یابی

این بخش به مشکلات رایجی که ممکن است با آنها مواجه شوید می‌پردازد.

Issue: Mount movement (swivel/tilt) is stiff.

راه حل: The joints may be overtightened or require lubrication. Locate the nuts on the swivel and tilt mechanisms. Slightly loosen them to allow for easier movement, then re-tighten to a comfortable tension. Apply a small amount of silicone-based lubricant to the moving parts if needed.

Issue: TV is not level after installation.

راه حل: The 360-degree rotation feature allows for minor leveling adjustments. Gently rotate the TV until it is level. If the issue persists, re-check the wall plate installation with a level.

Issue: Screws do not fit my TV.

راه حل: The package includes a variety of M4 and M6 screws of different lengths, along with spacers. Ensure you are using the correct diameter and length for your TV's VESA holes. If none of the provided screws fit, you may need to purchase specific screws compatible with your TV model. Consult your TV's manual for VESA screw specifications.

9. مشخصات

10. گارانتی و پشتیبانی

This Perlegear TV Wall Mount PGXSF1 comes with a ۱ سال گارانتی سازنده.

For technical assistance, missing parts, or warranty claims, please contact Perlegear customer support. Refer to the product packaging or the official Perlegear webسایتی برای جدیدترین اطلاعات تماس.

Please have your model number (PGXSF1) and purchase information ready when contacting support.