Giantex 48 x 30 Inch Stainless Steel Work Table

1. مقدمه

This manual provides detailed instructions for the assembly, operation, and maintenance of your Giantex 48 x 30 Inch Stainless Steel Work Table. Designed for durability and versatility, this heavy-duty table is suitable for various applications, including commercial kitchens, food preparation areas, garages, and home workstations. Please read this manual thoroughly before assembly and use to ensure safe and efficient operation.

شکل 1: تمام شده استview of the Giantex Stainless Steel Work Table.

2. اطلاعات ایمنی

Please observe the following safety guidelines to prevent injury and ensure the longevity of your work table:

• Always assemble and disassemble the table with care to avoid injury.
• از حداکثر ظرفیت وزنی تجاوز نکنید 550 پوند (249 کیلوگرم) for the entire table to ensure stability. The tabletop supports up to 330 lbs (150 kg), and the bottom shelf supports up to 220 lbs (100 kg).
• Always place the table on a level surface to prevent tipping.
• Utilize the adjustable feet to maintain stability on uneven surfaces.
• کودکان و حیوانات خانگی را از محل تجمع دور نگه دارید.

3. محتویات بسته

قبل از شروع مونتاژ، از وجود همه اجزا اطمینان حاصل کنید:

• رومیزی استیل ضد زنگ (1)
• Adjustable Under Shelf (1)
• Legs with Adjustable Feet (4)
• سخت‌افزار مونتاژ (پیچ، آچار آلن)

4. راه اندازی و مونتاژ

Assembly is straightforward and typically requires a screwdriver (not included) in addition to the provided Allen wrench. Follow these steps:

1. باز کردن قطعات: تمام قطعات را با دقت از بسته‌بندی خارج کنید. آنها را از نظر هرگونه آسیب‌دیدگی بررسی کنید.
2. پایه‌ها را به میز وصل کنید: Lay the tabletop upside down on a soft, clean surface to prevent scratches. Attach the four legs to the designated corners of the tabletop using the provided screws. در این s پیچ ها را کاملا سفت نکنیدtage.
3. Install Adjustable Under Shelf: Slide the adjustable under shelf onto the legs. Position it at your desired height. For easier installation, it is recommended to lay the table on its side. Ensure the shelf is level by measuring the distance from the bottom shelf to the bottom of each table leg.
4. Secure Shelf and Legs: Once the shelf is in place and level, fully tighten all screws for both the legs and the shelf.
5. پایه‌های قابل تنظیم را وصل کنید: Screw the adjustable feet into the bottom of each leg.
6. حذف فیلم محافظ: Before use, carefully peel off the protective film from all stainless steel surfaces.
7. Level the Table: Stand the table upright. Adjust the feet as necessary to ensure the table is stable and does not wobble on uneven surfaces.

Figure 2: Remove the protective film from the stainless steel surfaces before use.

Figure 3: Key features including the thickened tabletop, reinforced connections, and adjustable non-slip foot pads for stability.

5. دستورالعمل های عملیاتی

The Giantex Stainless Steel Work Table is designed for versatile use in various environments:

• Kitchen and Food Preparation: Utilize the spacious 48" x 30" stainless steel tabletop for preparing meals, chopping ingredients, or as an additional counter space. The adjustable under shelf provides convenient storage for kitchen appliances, pots, pans, or ingredients.
• Commercial and Restaurant Use: Ideal for busy restaurant kitchens, bakeries, or catering operations where a durable and easy-to-clean surface is essential.
• Garage and Workshop: Functions as a sturdy workbench for various projects, offering a robust surface for tools and materials. The under shelf can store equipment or supplies.
• اتاق رختشویی: Provides a practical surface for folding laundry or storing laundry supplies.

Figure 4: The work table integrated into a kitchen, demonstrating its utility for appliances and food preparation.

Figure 5: The adjustable shelf allows for flexible storage in diverse settings.

6. تعمیر و نگهداری

Maintaining your stainless steel work table is simple:

• تمیز کردن: تمام سطوح را با تبلیغات پاک کنیدamp cloth and mild detergent. For best results and to prevent water spots, dry immediately with a clean, soft cloth. Avoid abrasive cleaners or scouring pads that can scratch the stainless steel finish.
• پیشگیری از زنگ زدگی: While the table is rust-resistant, prolonged exposure to harsh chemicals or standing water can affect the finish. Clean spills promptly.
• بازرسی منظم: به صورت دوره‌ای تمام پیچ‌ها و اتصالات را بررسی کنید تا از سفت بودن آنها اطمینان حاصل شود. در صورت لزوم، برای حفظ پایداری، آنها را دوباره محکم کنید.

Figure 6: The multi-layered stainless steel construction ensures durability and resistance to corrosion.

7 عیب یابی

If you encounter any issues with your work table, consider the following:

• لق زدن میز: Ensure the table is on a level surface. Adjust the individual feet by twisting them until all four feet make firm contact with the floor and the table is stable. Check that all assembly screws are fully tightened.
• Difficulty with Shelf Installation: Ensure the legs are not fully tightened before attempting to slide the shelf into place. Loosen the leg screws slightly, position the shelf, then tighten all screws.
• Minor Scratches/Dents: Stainless steel can show minor cosmetic imperfections over time with heavy use. These typically do not affect the structural integrity or functionality of the table.

8. مشخصات

Figure 7: Detailed product dimensions and weight capacities.

9. گارانتی و پشتیبانی

For warranty information or technical support, please contact Giantex customer service. Refer to your purchase documentation for specific warranty terms and contact details. You can typically find support information on the official Giantex webسایت یا از طریق خرده فروشی که محصول از آن خریداری شده است.