محصول تمام شده استview
The Legami Just My Type Swivel Stamp with Ink Pad is a versatile tool designed for adding personalized messages to bullet journals, diaries, notepads, and notebooks. It features 12 different pre-set messages on a rotating mechanism, making it easy to switch between phrases. This compact and colorful stamp comes with its own ink pad, providing a convenient and fun way to express creativity.
Image 1: The Legami Just My Type Swivel Stamp shown alongside its green ink pad, ready for use.
راه اندازی
The Legami Swivel Stamp is designed for immediate use with minimal setup required.
- باز کردن قطعات: Carefully remove the swivel stamp and the ink pad from their packaging.
- بررسی آسیب: Before first use, inspect both the stamp and the ink pad for any signs of damage during transit.
- Prepare Ink Pad: Ensure the ink pad is moist and ready for stamping. If it appears dry, gently press the stamp onto the pad a few times to distribute the ink.
Image 2: The Legami Just My Type Swivel Stamp and ink pad displayed in their original retail packaging.
دستورالعمل های عملیاتی
Follow these steps to effectively use your swivel stamp:
- Select a Message: Rotate the dial on the side of the stamp until the desired message is visible and aligned in the stamping window. The stamp features 12 different messages.
- Ink the Stamp: Gently press the selected message surface onto the provided ink pad. Ensure the entire message area makes contact with the ink pad to achieve a clear impression. Avoid excessive pressure to prevent over-inking.
- Position for Stamping: خیابان را قرار دهیدamp firmly on the surface where you wish to apply the impression (e.g., paper, journal page).
- اعمال فشار: Apply even, firm pressure directly down onto the stamp. Hold for a moment to allow the ink to transfer.
- Lift Stamp: Carefully lift the stamp straight up from the surface to reveal the impression.
- Re-ink as Needed: Re-ink the stamp on the ink pad before each new impression or when the impression starts to appear faint.
تعمیر و نگهداری
Proper maintenance ensures the longevity and optimal performance of your stamp and ink pad.
- Cleaning the Stamp: If ink builds up on the stamp's rubber surface or if you notice smudging, gently dab the stamp onto a damp, lint-free cloth or a piece of scrap paper until the excess ink is removed. Avoid using harsh chemicals or abrasive materials.
- Ink Pad Care: Always close the ink pad lid securely after each use to prevent the ink from drying out. Store the ink pad in a cool, dry place away from direct sunlight.
- ذخیره سازی: Store the swivel stamp and ink pad together in their original packaging or a designated storage container to protect them from dust and damage.
عیب یابی
| مشکل | علت احتمالی | راه حل |
|---|---|---|
| Faint or Incomplete Impression | Insufficient ink on stamp; uneven pressure; dry ink pad. | Re-ink the stamp thoroughly. Apply firm, even pressure. Ensure ink pad lid is closed when not in use. |
| Smudged Impression | Excessive ink; stamp moved during application; paper type. | Avoid over-inking. Apply stamp straight down and lift straight up. Allow ink to dry completely on paper. |
| Difficulty Rotating Messages | Dust or debris in mechanism; stiff mechanism. | Gently clean around the rotating dial. Rotate the dial back and forth a few times to loosen it. |
مشخصات
| نام تجاری | Legami |
| شماره مدل | ROT0001 |
| وزن مورد | 0.704 اونس |
| ابعاد محصول | 4.53 x 0.98 x 5.51 اینچ |
| شکل | مستطیل شکل |
| نوع مواد | پلاستیک |
| تعداد آیتم ها | 1 (Swivel Stamp with Ink Pad) |
| تاریخ برای اولین بار در دسترس است | 15 مه 2020 |
گارانتی و پشتیبانی
Specific warranty information for the Legami Just My Type Swivel Stamp is not provided in this manual. For details regarding warranty coverage, product support, or to inquire about replacement parts, please refer to the manufacturer's official website or contact Legami customer service directly.
You may find additional information on the official Legami webسایت: www.legami.com
