VOYAGER Neutrino Compact Electric Cruiser Skateboard User Manual

محصول تمام شده استview

The VOYAGER Neutrino Compact Electric Cruiser Skateboard is designed for efficient and enjoyable personal transportation. This lightweight and portable electric skateboard features a 350W brushless hub motor, offering a maximum speed of 12.5 mph and a range of up to 7 miles. It is equipped with a Bluetooth wireless remote for intuitive control and is built with IP55 water resistance for durability in various conditions.

ویژگی های کلیدی:

• موتور بدون جاروبک ۲۷۰ وات: فراهم می کند ample power and torque for smooth acceleration.
• 12.5 MPH Max Speed: Offers a balanced speed for commuting and leisure.
• Up to 7 Mile Range: Suitable for short to medium distance travel.
• Bluetooth Wireless Remote: Enables easy control of speed modes and monitors power levels.
• مقاومت در برابر آب IP55: Ensures functionality in wet conditions.
• فشرده و سبک: Weighs approximately 9.5 lbs for portability.
• حالت های سرعت قابل تنظیم: Caters to various skill levels, from beginners to experienced riders.
• 200lb Weight Capacity: Accommodates both teenagers and adults.

راه اندازی

1. جعبه گشایی و بازرسی اولیه

Carefully remove all components from the packaging. Inspect the skateboard and accessories for any signs of damage. Ensure all listed items are present.

Image: The Voyager Neutrino Electric Skateboard with its remote control, as received in the package.

2. Charging the Skateboard and Remote

Before first use, fully charge both the skateboard and the remote control. The skateboard's charging port is located on the underside of the deck. The remote control charges via a Type-C cable.

• Skateboard Charging: Connect the provided charger to the skateboard's charging port. A full charge typically takes approximately 2 hours.
• شارژ از راه دور: Use the provided Type-C cable to charge the remote control. It also takes approximately 2 hours for a full charge.

Image: The underside of the Voyager Neutrino skateboard, highlighting the integrated battery and the charging port.

Image: The Bluetooth remote control, showing its buttons and indicators.

۳.۲ جفت‌سازی از راه دور

The remote control and skateboard should automatically sync when both are powered on and fully charged. Ensure both devices have sufficient power for successful pairing.

دستورالعمل های عملیاتی

1. روشن/خاموش کردن

• Skateboard: The skateboard can be powered on by simply rolling it or by manually pressing the power button located on the underside of the deck.
• کنترل از راه دور: Long-press the power button on the remote control to turn it on. To power off, long-press the power button again.

2. Speed Modes and Control

The remote control features four power modes, allowing you to adjust the speed according to your preference and skill level. These modes progressively increase in speed.

• تغییر حالت ها: Short-press the power button on the remote to cycle through the four speed modes. Indicator lights on the remote will show the currently selected mode.
• شتاب: Push the accelerator lever forward to increase speed.
• ترمز: Pull the accelerator lever backward to engage the brake.
• معکوس: Long-press the reverse button on the remote. The indicator light will change to red, allowing you to move the skateboard backward using the accelerator lever.

3. دستورالعمل های ایمنی

• همیشه از وسایل ایمنی مناسب از جمله کلاه ایمنی، زانوبند و آرنج بالشتک استفاده کنید.
• Ride in safe, open areas away from traffic and pedestrians.
• Familiarize yourself with the controls and different speed modes before attempting higher speeds.
• از محیط اطراف و موانع احتمالی خود آگاه باشید.
• Avoid riding on wet or uneven surfaces, despite the IP55 rating, to prevent accidents.
• از حداکثر ظرفیت وزنی 200 پوند تجاوز نکنید.

تعمیر و نگهداری

1. مراقبت عمومی

• Keep the skateboard clean and dry. Wipe down the deck and components with a damp پارچه بعد از استفاده
• Store the skateboard in a cool, dry place away from direct sunlight and extreme temperatures.
• Avoid exposing the skateboard to prolonged periods of moisture, despite its water resistance.

2. مراقبت از باتری

• باتری را بیش از حد شارژ نکنید یا کاملاً تخلیه نکنید.
• If storing for an extended period, charge the battery to approximately 50-60% and recharge every 2-3 months.
• Use only the original charger provided with the skateboard.

3. Wheel and Truck Adjustment

The package includes an adjustable spanner for the wheels. Use this tool to ensure the wheels and trucks are properly tightened for optimal performance and safety. Adjust tightness to your preference for turning responsiveness.

تصویر: جزئیات view of the skateboard's wheels and trucks, which can be adjusted for ride preference.

عیب یابی

• Skateboard Not Powering On: Ensure the battery is fully charged. Try rolling the skateboard to activate it, or manually press the power button.
• ریموت جفت نمی‌شود: Make sure both the skateboard and remote are fully charged and powered on. Bring them close together to facilitate pairing.
• کاهش عملکرد/برد: This may indicate a low battery charge. Ensure the battery is fully charged before use. Performance can also be affected by rider weight, terrain, and speed mode.
• صداهای غیرمعمول: Check wheels and trucks for any loose components or debris. Tighten as necessary using the provided spanner.

مشخصات

گارانتی و پشتیبانی

For warranty information, product support, or to purchase replacement parts, please refer to the official VOYAGER webبه سایت مراجعه کنید یا مستقیماً با خدمات مشتریان آنها تماس بگیرید. رسید خرید خود را به عنوان مدرک خرید برای هرگونه ادعای گارانتی نگه دارید.

Additional protection plans may be available for purchase from third-party providers. Please review their terms and conditions for coverage details.