IKEA Drawer Unit Assembly and User Manual

1. مقدمه

Thank you for choosing the IKEA Drawer Unit. This manual provides essential information for the safe assembly, operation, and maintenance of your new furniture. Please read these instructions carefully before beginning assembly and retain them for future reference.

2. اطلاعات ایمنی

• خطر واژگونی: Furniture tip-overs can cause serious or fatal crushing injuries. Always secure this unit to the wall using the provided anti-tip device.
• مونتاژ: Assembly must be carried out by a competent person. Incorrect assembly can lead to the furniture tipping or falling, causing serious injury.
• قطعات کوچک: Keep all small parts, such as screws and fittings, out of reach of children during assembly to prevent choking hazards.
• محدودیت وزن: کشوها را بیش از حد بار نکنید. برای حفظ ثبات، وزن را به طور مساوی توزیع کنید.
• قرار دادن: Place the unit on a level surface. Uneven surfaces can affect stability and drawer function.

3. محتویات بسته

Before assembly, ensure all parts are present. Refer to the separate assembly diagram for a detailed list of components and hardware. If any parts are missing or damaged, contact IKEA customer service.

تصویر ۴.۲: مثالample of IKEA Drawer Unit components. This image illustrates the various panels, hardware, and drawer parts typically included in the package, laid out before assembly begins.

4. راه اندازی و مونتاژ

Assembly is required for this IKEA Drawer Unit. Follow the steps below and refer to the included graphical instructions for detailed guidance.

1. فضای کاری را آماده کنید: Clear a spacious, clean, and level area for assembly. Lay down a blanket or cardboard to protect the furniture parts and your floor.
2. شناسایی قطعات: Unpack all components and identify them using the parts list in the separate assembly diagram.
3. مونتاژ قاب: Begin by assembling the main frame of the drawer unit. Attach the side panels to the top and bottom panels using the provided dowels and cam locks/screws. Ensure all connections are secure.
4. پنل پشتی را وصل کنید: Secure the back panel to the frame using small nails or screws. This adds stability and squareness to the unit.
5. نصب ریل‌های کشو: Attach the drawer runners to the inside of the frame according to the diagram. Pay attention to the orientation (left/right, front/back).
6. کشوها را جمع کنید: For each drawer, assemble the front, back, and side panels. Slide the bottom panel into the grooves. Attach the drawer runners to the sides of the assembled drawer.
7. کشوها را وارد کنید: Carefully slide each assembled drawer onto its respective runners in the main frame.
8. دسته‌ها را وصل کنید: Secure handles or knobs to the drawer fronts.
9. محکم به دیوار: Crucially, attach the anti-tip device to the back of the drawer unit and then to a wall stud or appropriate wall anchor. This prevents the unit from tipping over.

Tools required: Hammer, screwdriver (Phillips head), measuring tape.

5. دستورالعمل های عملیاتی

• باز و بسته کردن کشوها: Gently pull or push the drawer fronts to open and close. Avoid forcing drawers.
• در حال بارگذاری: Distribute items evenly within the drawers. Avoid placing excessively heavy items in a single drawer, especially in upper drawers, as this can affect stability.
• ثبات: Always ensure the unit is securely anchored to the wall. Do not climb on or lean heavily on the unit.

6. تعمیر و نگهداری

• تمیز کردن: با تبلیغ پاک کنیدamp با یک پارچه و یک پاک‌کننده ملایم، آن را خشک کنید. از پاک‌کننده‌های ساینده یا مواد شیمیایی قوی خودداری کنید.
• اتصال دهنده ها: Periodically check all assembly fasteners (screws, cam locks) and re-tighten if necessary to maintain structural integrity.
• ریل‌های کشو: If drawers become stiff, a small amount of silicone-based lubricant can be applied to the runners, but typically this is not required for IKEA units.

7 عیب یابی

• Drawers stick or don't close properly:
  • Check if the unit is on a level surface.
  • مطمئن شوید که تمام پیچ‌های مونتاژ سفت شده‌اند.
  • Verify that drawer runners are correctly installed and aligned.
  • Check for obstructions inside the drawer or on the runners.
• لرزش واحد:
  • مطمئن شوید که دستگاه روی سطح صاف قرار گرفته است.
  • Re-tighten all assembly fasteners.
  • Confirm the back panel is securely attached, as it contributes to stability.
  • Verify the unit is properly anchored to the wall using the anti-tip device.

8. مشخصات

9. گارانتی و پشتیبانی

IKEA products are designed with quality and durability in mind. For specific warranty information regarding your Drawer Unit, please refer to the warranty documentation included with your purchase or visit the official IKEA webسایت

For customer support, missing parts, or further assistance, please contact IKEA customer service through their official channels. Have your proof of purchase and product model information ready.